PHILIPS BRE700 Epilator Wet Dry Epilator Instruction Manual

June 1, 2024
Philips

PHILIPS BRE700 Epilator Wet Dry Epilator

PHILIPS-BRE700-Epilator-Wet-Dry-Epilator-FIG-33

Specifications

  • Model: BRE740-BRE700
  • Product Variants: BRE700, BRE710, BRE715, BRE720, BRE730, BRE735, BRE740
  • Waterproof: Yes
  • Recommended Usage : Bath, Shower

IMPORTANT SAFETY INSTRUCTIONS

  • When using an electric product, basic precautions should always be followed, including the following:
  • Read all instructions before using this product.

DANGER
To reduce the risk of electric shock:

  • Do not reach for a corded product that has fallen into water. Unplug immediately from the power outlet.
  • Keep the power cord dry (Fig. 2).
  • Do not place or store the product where it can fall or be pulled into a tub or sink. Do not place or drop the product into water or other liquid.
  • This product does not work while it is connected to the power outlet. Except when charging, always unplug this product from the power outlet.
  • Remove the power cord from the power outlet and product before cleaning.

WARNING
To reduce the risk of burns, fire, electric shock, or injury to persons:

  • This product is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge unless they have been given supervision or instruction concerning use of the product by a person responsible for their safety. Children should be supervised to ensure that they do not play with the product.

  • Use this product only for its intended household use as described in this manual. Misuse can lead to hazards or serious injuries. Do not use attachments not recommended by Philips North America LLC. Accessories supplied may vary for different products.

  • Never operate this product if it has a damaged power cord, if it is not working properly, after it has been dropped or damaged, or after the product or power cord has been dropped into water. For assistance call 1-800-243-7884 (US) or 1-866-800-9311 (Canada).

  • Keep the power cord away from heated surfaces.

  • Never drop or insert any object into any opening.

  • Do not use the power cord in or near a power outlet that contains an electric air freshener to prevent damage to the power cord.

  • Do not use products outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.

  • Always check rotating discs, foil and attachments before using the product.
    Do not use the product if rotating discs, foil and attachments are damaged, as injury may occur.

  • Always attach the power cord to the product first, then to a power outlet. To disconnect, set all controls to ‘off’ position. Then remove the power cord from the power outlet.

  • Plug power cord directly into a power outlet. Do not use an extension cord.

  • Unplug the power cord before plugging in or unplugging the product.

  • The batteries used in this product may present a fire or chemical burn hazard if mistreated. Do not disassemble, heat above 100 °C (212 °F) or incinerate.
    IMPORTANT: The power plug contains a transformer. Do not cut off the power plug to replace it with another plug as this will cause a hazardous condition.

  • Only use original Philips accessories or consumables. Only use the detachable power cord HQ8505.

  • Charge, use and store the product at a temperature between 10 °C and 35 °C.

  • Keep products and batteries away from fire and do not expose them to direct sunlight or high temperatures.

  • If the product becomes abnormally hot or smelly, changes colour or if charging takes longer than usual, stop using and charging the product and contact Philips.

  • Do not place products and their batteries in microwave ovens or induction cookers.

  • Do not open, modify, pierce, damage or dismantle the product or battery to prevent batteries from heating up or releasing toxic or hazardous substances.
    Do not short-circuit, overcharge or reverse charge batteries.

  • If batteries are damaged or leaking, avoid contact with the skin or eyes. If this occurs, immediately rinse well with water and seek medical care.

  • When you handle batteries, make sure that your hands, the product and the batteries are dry.

  • To avoid accidental short-circuiting of batteries after removal, do not let battery terminals come into contact with metal objects (e.g. coins, hairpins, rings). Do not wrap batteries in aluminium foil. Tape battery terminals or put batteries in a plastic bag before you discard them.

SAVE THESE INSTRUCTIONS

IMPORTANT INFORMATION

CAUTION

  • For hygienic reasons, it is recommended that the product be used by only one person.
  • Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as gasoline or acetone to clean the product.
  • Turn the product off before removing or attaching attachments and before cleaning.
  • When rinsing the product or attachments, always check to make sure the water is not too hot (maximum 100 °F) to prevent your hands from getting burnt.
  • Methods of removing hair by the root can cause ingrown hairs and minor skin injuries. Please consult your doctor if you have any questions about the use of an epilator.
  • Do not use the epilator if you suffer from varicose veins, rashes, spots or blemishes, or when the skin is irritated or if you have ingrown hairs or a tendency to produce ingrown hairs. Consult your doctor first.
  • Any minor injury resulting from hair removal may allow bacteria to penetrate the injury site, potentially causing small scars or a change in the pigmentation of the skin. The risk of infection may be minimized by thoroughly cleaning the rotating discs before and/or after each use (see ‘Cleaning’).
  • The epilator should only be used after prior consultation with your doctor if you have or experience:
  • Open wounds
  • Eczema, psoriasis (scaly eczema), inflamed skin reactions such as folliculitis, skin rashes or the tendency to allergy or allergic skin reactions
  • Immune deficiency or disorders
  • Couperose, rosacea, or varicose veins
  • Pregnancy
  • Reduced skin immunity as a result of diabetes, pregnancy, Raynaud’s disease, etc.
  • Hemophilia
  • Moles, raised skin bumps, etc.
  • If you have been or have begun taking hormone medication, or if you have recently been pregnant, a change in your hormone levels may influence the thickness, colour or amount of hair growth. This is caused by hormonal changes, not by this method of hair removal.
  • Do not use bath or shower oils when you epilate wet skin, as this may cause serious skin irritation.
  • Clean the epilating head after each use (see ‘Cleaning’).

GENERAL

  • This product is waterproof (Fig. 3). It is suitable for use in the bath or shower and for cleaning under the tap.
  • Clean the product after each use (see ‘Cleaning’).
  • This product has no other user-serviceable parts. For assistance call 1-800-243-7884 (US only) or 1-866-800-9311 (Canada only).

Introduction

Congratulations on your purchase and welcome to Philips! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.

Features

PHILIPS-BRE700-Epilator-Wet-Dry-Epilator-FIG-1

  1. Handle
  2. Speed lights (I and II)
  3. On/off button
  4. Battery indicator
  5. Socket for small plug
  6. Release button
  7. Epilating head
  8. Built-in light
  9. Epilating discs
  10. Efficiency cap
  11. Delicate area cap
  12. Trimmer head
  13. Trimmer comb
  14. Shaving head
  15. Shaving head comb
  16. Coupling unit
  17. Body exfoliation brush
  18. Protection cap for body exfoliation brush
  19. Callus removal head
  20. Callus removal disk
  21. Protection cap for callus removal head
  22. Exfoliation glove
  23. Power plug
  24. Small plug
  25. Not shown : Cleaning brush, Pouch

Note: The heads and accessories supplied vary for different model numbers. Consult the overview illustration for the heads and accessories supplied with your particular model.

Charging

  • Fully charge the product before using it for the first time or after non-use for a long period of time.

  • Charging or using the product at temperatures below 50 °F (10 °C) or higher than 95 °F (35 °C) adversely affects the lifespan of the battery.
    Note: This product can only be used without a cord (Fig. 4).

  • Be certain the product is OFF.

  • Insert the small plug into the product and put the power plug into any 120V AC outlet. Use only the cord provided.

  • When the battery indicator flashes white (Fig. 5), the product is charging.

  • After 1.5 hours of charging, the product has a cordless operating time of up to 40 minutes.

  • When the battery indicator lights up white continuously (Fig. 6), the product is fully charged.

  • The battery indicator does not light up when the product is switched on: the product contains enough energy to be used.

  • When the battery indicator flashes orange (Fig. 5), the battery is almost empty and needs to be charged. Charge the product when you have finished using it.

NOTE: If the product is fully charged and connected to the electrical outlet, the battery indicator flashes a few times when you press the on/off button. This reminds you to disconnect the product from the electrical outlet before using it.

Quick charge

  • When the battery is empty and you start charging it, the battery indicator flashes white quickly.
  • After approximately 15 minutes, the battery indicator starts flashing white slowly. At this point, the battery contains enough energy for up to 10 minutes of use.

Using the product

Switching the product on and off

  1. To turn on the product, press the on/off button once (Fig. 7).
  2. If you want to select the low-speed setting, press the on/off button again (Fig. 8).
  3. To turn off the product, press the on/off button once more.

Attaching and detaching the epilating head

  1. To attach the epilating head, press it onto the handle (‘click’) (Fig. 9).
  2. To detach the epilating head, press the release button on the back of the product (Fig. 10).
    Note: You can attach and detach the callus removal head, the trimmer head, the shaving head and the body exfoliation brush in the same way.

Attaching and detaching the callus removal disk

  1. To attach the disk, push it onto the coupling in the head (Fig. 11).
    • Look at the appliance from the side to check if the disk is level with the outer rim of the head.
    • If the disk wobbles when you switch on the appliance, the disk is not placed correctly. Remove the disk and attach it properly.
  2. To remove the disk, put your thumb in the indent behind the disk and push it forward until the disk detaches from the head (Fig. 12). PHILIPS-BRE700-Epilator-Wet-Dry-Epilator-FIG-12

Attaching and detaching the trimmer comb
To attach the trimmer comb onto the trimmer head:

  1. Place the notch on one side of the comb in the indent in the trimmer head.

  2. Press the comb onto the trimmer head until the notch on the other side of the comb snaps into the indent on the other side of the trimmer head (Fig. 13).
    To detach the trimmer comb from the trimmer head:

  3. On one side of the comb, place a fingernail between the comb and the trimmer head.

  4. Pull with your nail until the comb comes off the trimmer head (Fig. 14). PHILIPS-BRE700-Epilator-Wet-Dry-Epilator-FIG-14Do not pull at the back or teeth of the comb to remove it.

How to use your epilator

  • Use this epilator for its intended household use as described in this manual.
  • For hygienic reasons, the epilator and attachments should only be used by one person.
  • Epilation is easier and more comfortable when the hair has the optimum length of 1/8 – 5/32 in/3-4 mm. If the hairs are longer, trim them first or shave and epilate after 1 to 2 weeks.
  • Make sure you hold the epilator handle at a 75° angle on the skin and move it slowly against the direction of hair growth (Fig. 15).
  • It is normal to experience slight skin irritation (red skin or red dots) after epilating. In this case, it is best to epilate in the evening as most skin irritation disappears overnight. This effect will gradually lessen with each use.
  • After each use, you may want to apply a non-alcohol-based mild cream or body lotion which will help reduce the possibility of skin irritation. Be certain it does not contain alcohol as it may cause discomfort.
  • Make sure the epilator is fully charged before using it. This epilator will not operate while the cord is connected to an electrical outlet.

Epilating

  • Only use the epilator attachment to epilate areas below the neck such as your legs, underarms and bikini line.

  • Attach the delicate area cap if you want to epilate facial hair.

  • For gentle, less painful epilation, epilate in the shower or bath on wet skin with or without shower gel or soap.

  • For dry epilating, make sure your skin is clean and free from grease and creams. Do not apply any cream before using. Hairs are easier to remove after a bath or shower, but your skin should be completely dry before using your epilator.

    • Before first use, clean the epilating head (see ‘Cleaning’).
    • Press the epilating head onto the handle (Fig. 9).
    • If desired, put an attachment on the epilating head (Fig. 16).
  • NOTE: The attachment will only fit onto the product in one direction.

  • Press the on/off button once to turn on the epilator (Fig. 7).

    • The epilator starts running at speed II which is the most efficient speed for epilating. The Speed II light lights up.
    • If you want to use speed I, press the on/off button a second time. Speed I light lights up (Fig. 8).
    • Select speed I for areas with little hair growth, for hard-to-reach places and areas with bones close to the skin’s surface, such as knees and ankles.
    • When you press the on/off button a third time, the epilator turns off.
      Tip: For greater visibility of fine hairs, the built-in light goes on automatically when epilating (Fig. 17). To turn off, press the on/off button for 3 seconds after turning on the product.
  • Hold the epilator perpendicular to your leg at a 75° angle with the on/off button pointing in the direction you are going to move the product (Fig. 15).

  • Gently press and move the epilator slowly over the skin against the direction of hair growth. If you press too lightly or too hard, the epilator will not be able to grasp and remove the hair. Experiment until you find the right settings and the right amount of pressure for your type of skin and hair.
    Tip : When epilating sensitive areas, stretch the skin with your free hand. For epilating underarms, put your hand on the back of your head to stretch the skin (Fig. 18).

  • Press the on/off button to turn the epilator OFF.

  • Pull the attachment off the epilating head and clean the epilator and attachment (see ‘Cleaning’).

IMPORTANT:

  • After using the epilator, some redness or irritation may occur. This is normal and should disappear quickly.
  • Clean the product and attachments after each use (see ‘Cleaning’).

Using epilator attachments

  • When using epilator attachments, always be sure you place the heads flat onto the skin at a 75° angle (Fig. 15).
  • Simply snap each attachment onto the epilator head (‘click’) (Fig. 16).
  • To remove an attachment, grasp its front and back and pull it up off the epilator head (Fig. 19).

Delicate area cap

  • Attach the delicate area cap onto the epilating head for more comfortable epilating of delicate areas such as underarms and bikini area.
  • You can also use the delicate area cap for precise epilating of facial hair such as upper lip
    Do not use the appliance to epilate eyelashes, eyebrows or scalp hair.

Efficiency cap
Attach the efficiency cap onto the epilating head to keep the skin tight and help reduce pain while epilating

Body exfoliation brush

  • Remove the epilator head by pressing the release button on the back of the appliance (Fig. 10).
  • Attach the body exfoliation brush to the coupling unit and then attach it to the appliance handle. (Fig. 20) The body exfoliation brush helps remove dead skin cells.

Do not use the body exfoliation brush on your face

Callus removal
Note: The callus removal head is only intended for use on feet.
You can use the callus removal disk in 3 different ways, depending on the area or callus you want to treat.

  1. To treat a large, flat area, use the entire disk (Fig. 21). Make sure you place the disk flat onto the skin for good control during use.
  2. For precision treatment of smaller areas and good visibility of the treated area (Fig. 22), use the top part of the disk that sticks out beyond the top of the head (Fig. 23).
  3. For precision treatment and for buffing away hard skin very quickly, use the narrow edge of the protruding top part of the disk (Fig. 24).
    Move the disk back and forth gently over the skin you want to treat. Do not push too hard. When you push too hard, the disk might stop rotating

Shaving
Do not use the shaving head if the foil is damaged or broken, as injury may occur.

  • Use the shaving head to shave your legs, underarms and bikini line.
  • Attach the shaving head comb onto the shaving head to shave hairs to a length of 1/8in/3mm (Fig. 25). When you remove the comb, always grasp the comb on the sides (Fig. 26).
  • To shave legs and bikini line, always move the appliance gently over the skin against the direction of hair growth.
  • To shave underarms, place one arm behind your head and move the appliance up and down and from left to right.

Trimming

  • Use the trimmer head to trim hard-to-reach areas in the bikini zone.
  • Attach the trimmer head comb onto the trimmer head to trim hairs in the bikini zone to a length of 1/8in/3mm (Fig. 27).
  • To create precise lines, place the trimmer head perpendicular onto the skin (Fig. 28).

Caution: Do not use the trimmer head without the comb on intimate areas other than the bikini line as this could cause injury

Overheat protection

Note: To avoid overheating of the product, do not press the product too hard onto your skin. The product works best when you move it over your skin without exerting any pressure.

  1. If the overheat protection is activated, the product turns off automatically.
    The speed lights start flashing.

  2. Let the product cool down. The lights stop flashing after 4 seconds.

  3. When the product has cooled down, you can turn it on again.
    If the lights start flashing again, the product has not yet cooled down completely.

Cleaning

IMPORTANT:

  • Always clean the handle, heads and attachments after each use.

  • Always turn the product OFF and remove the power cord from the electrical outlet and product before cleaning.

  • Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as gasoline or acetone to clean the product.

  • Keep the power cord dry (Fig. 2).
    Cleaning the epilating head and epilating attachments

  • It is essential for hygienic reasons and optimum performance that the epilating head, attachments and rotating disks are cleaned after each use.

  • It is strongly recommended to always rinse the epilating head with cold water to help prevent bacterial growth.

  • Never clean, remove, or replace the epilating head or attachments while the motor is ON. The rotating disks are not removable from the epilating head.

  • Do not apply pressure or touch rotating disks with hard objects as this may dent or damage the disks. If damage occurs, discontinue use immediately.

    • Be certain the product is OFF.

    • Pull any attachment off the epilating head (Fig. 19).

    • Remove loose hairs from the epilating disks and attachment with the brush.
      Never try to detach the epilating disks from the product

    • Rinse attachments thoroughly under warm tap water while turning.

    • Turn the product on and rinse the epilating head under cold tap water for 15 seconds (Fig. 29).

    • Shake off excess water and dry the epilating head and attachments completely with a soft towel or tissue, or allow to air-dry thoroughly.

    • To attach the epilating head, press it onto the handle (‘click’) (Fig. 9).

Cleaning the callus removal head
To clean the callus removal head and disk (if supplied): clean the outside of the head and disk with the cleaning brush supplied (Fig. 30). Then remove the disk off the head and clean the inside of the head with the cleaning brush supplied (Fig. 31).
If you prefer, you can rinse the callus removal head and disk under a running tap.
Let all parts dry completely. PHILIPS-BRE700-Epilator-Wet-Dry-Epilator-
FIG-31

Cleaning the shaving head

  • Never clean or remove the shaving head or cutting unit while the motor is ON.

  • Do not apply pressure to the shaving head. Do not touch the foil with hard objects as this may dent or damage the foil or cutters.

  • Do not use the shaving head if the foil is damaged or broken, as this may cause facial injury.

  • Be certain the product is OFF.

  • Press the release button and remove the shaving head from the handle.

  • Pull the cutting unit out of the shaving head (Fig. 32).

  • Clean the cutting unit, foil, cutters and inside the shaving head with the cleaning brush. Also, brush away any hairs that have collected under the trimmers.
    To avoid damage, never use a brush to clean the shaving foil

  • You can also rinse the cutting unit, inside the shaving head and accessories under warm tap water.

  • Allow all parts to air-dry thoroughly.

  • Put the cutting unit back into the shaving head (‘click’).
    For the best shaving performance, it is suggested to lightly oil the shaving head every six weeks by spreading a drop of mineral oil over the foil and cutters.

Replacing the shaving head-cutting unit
If the foil and/or trimmers of the cutting are worn or damaged, do not continue to use the shaving head.

A worn or damaged cutting unit should only be replaced with an original Philips cutting unit which is available at www.philips.com/parts-and- accessories. You can also call 1-800-243-7884 (in US only) or 1-866-800-9311 (in Canada only) for assistance

The cutting unit is a precision part. Handle with care

  1. Always turn the product OFF and remove the power cord from the electrical outlet and product before replacing the cutting unit.
  2. Press the release button and remove the shaving head from the handle.
  3. Pull the cutting unit out of the shaving head (Fig. 32).
  4. Place a new cutting unit into the shaving head (‘click’).
  5. Reattach the shaving head to the handle.
  6. After replacing the cutting unit, check to make sure the cutting unit and shaving head are firmly attached before using the epilator.

Storage

  • Be sure the epilator is turned OFF. Remove the power cord from the electrical outlet and handle before storing the product in a safe, dry location where it will not be crushed, banged, or subject to damage.
  • Do not wrap the cord around the epilator when storing.
  • Store the cord in a safe location where it will not be cut or damaged.
  • Do not place or store the epilator where it can fall or be pulled into a tub or sink, water or other liquid while plugged in.
  • Put the body exfoliation brush protective cap on the body exfoliation brush after use.
  • Store the epilator and attachments in the pouch provided.

Accessories

  • For maximum shaving performance, replace the shaving head-cutting unit once a year. This replacement part can be purchased at www.philips.com/parts-and-accessories.
  • If you use the body exfoliation brush 2-3 times a week, replace it every 3 months.
  • These replacement parts can be purchased at www.philips.com/store.
  • Callus removal head (if supplied): Replace the callus removal disk with one of the original types when its effectiveness decreases.

Assistance
For assistance, visit our website: www.philips.com/support or call toll-free
1-800-243-7884 (in US only) or 1-866-800-9311 (in Canada only).

Disposal

  • This product contains a rechargeable lithium-ion battery which must be disposed of properly.
  • Contact your local town or city officials for battery disposal information. In the US, you can also call 1-800-822-8837 or visit www.call2recycle.org for battery drop-off locations (Fig. 33). In Canada, you can also call 1-888-224-9764 or visit www.call2recycle.ca for battery drop-off locations.
  • For assistance, visit our website www.philips.com/support or call toll-free at 1-800-243-7884 (in the US only) or 1-866-800-9311 (in Canada only).
  • Your product is designed and manufactured with high-quality materials and components, which can be recycled and reused. For recycling information, please contact your local waste management facilities or visit
    www.recycle.philips.com.

Warranty

Full Two-Year Warranty

  • Philips North America LLC (USA) and Philips Electronics Ltd (Canada) warrant this new product against defects in materials or workmanship for two years from the date of purchase and agree to repair or replace any defective product without charge.
  • Cutting units, combs, the body exfoliation brush and the callus removal disk are not covered by the terms of this warranty because they are subject to wear and tear.

IMPORTANT: This warranty does not cover damage resulting from accident, misuse or abuse, lack of reasonable care, the affixing of any attachment not provided with the product or loss of parts or subjecting the product to any but the specified voltage.

  • NO RESPONSIBILITY IS ASSUMED FOR ANY SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES.
  • To obtain warranty service, simply go to www.philips.com/support for assistance. It is suggested that for your protection you return shipments of product by insured mail, insurance prepaid. Damage occurring during shipment is not covered by this warranty. NOTE: No other warranty, written or oral, is authorized by Philips North America LLC and Philips Electronics Ltd (Canada).
  • This warranty gives you specific legal rights, and you may also have other rights that vary from state to state, province to province or country to country. Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above exclusion and limitations may not apply to you.
  • Read the enclosed instructions carefully.

45-Day Money-Back Guarantee

  • If you are not fully satisfied with your product send the product back and we’ll refund you the full purchase price.
  • The product must be shipped prepaid by insured mail, insurance prepaid, and have the original sales receipt, indicating purchase price and date of purchase.
  • We cannot be responsible for lost mail.
  • The product must be postmarked no later than 45 days after the date of purchase. Philips reserves the right to verify the purchase price of the product and limit refunds not to exceed the suggested retail price.
  • To obtain the money-back guarantee service, please go to www.PhilipsMoneyBack.com and follow the simple 3-step process.
  • Delivery of refund check will occur 6–8 weeks after receipt of returned product.

In US manufactured for: Philips Personal Health, a division of Philips North America LLC, P.O. Box 10313, Stamford, CT 06904 / En EUA manufacturado para: Philips Personal Health, una división de Philips North America LLC, P.O. postal 10313, Stanford, CT 06904

In Canada imported by: Philips Electronics Ltd, 1875 Buckhorn Gate, 5th Floor, Mississauga, Ontario, L4W 5P1

PHILIPS and Philips Shield are registered trademarks of Koninklijke
©2023 Philips North America LLC. All rights reserved. 3000.051.7427.2 (05/08/2023)

FAQ

Frequently Asked Questions

  • Q: Can I use this product on sensitive skin?
    • A: It is recommended to consult a doctor before using the product on sensitive skin to avoid any adverse reactions.
  • Q: How often should I clean the product?
    • A: It is advised to clean the product after each use to maintain hygiene and prevent any potential skin issues.
  • Q: Is the product safe for children to use?
    • A: This product is not intended for use by children. Keep it out of reach of children for safety reasons.

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals