HAMITOR B0CN1G6D9N Rustproof Corner Shower Caddy Tension Pole Instruction Manual
- June 1, 2024
- HAMITOR
Table of Contents
Thank you for purchasing this product!
B0CN1G6D9N Rustproof Corner Shower Caddy Tension Pole
Warning
Install in a clean, dry, and safe environment. Do not stand on tub ledge.
Assemble on the floor.
Please identify all parts and hardware. Place the part on a soft surface to
prevent surface scratches.
Tools needed
Product Accessories
| Measurement | Tubes used |
|---|---|
| 26-33.7in | A+B |
| 33.7-414in | A+B+C |
| 40.8-48.5 in | A+ B+ (D) |
| 48.5-56.2 in | A+B+C+(D*) |
| 55.6-63.3 in | A+ B+ (D*2) |
| 63.3-711n | A+B+C+(D*2) |
| 70.4-78.1 in | A+ B+ (D*3) |
| 78.1-85.8 in | A+B+C+(D*3) |
| 85.2-92.9 in | A+ B+ (D*4) |
| 92.9-100.6 in | A+ B+ C+ (D*4) |
| 100-107.7 in | A+ B+ (D*5) |
| 107.7-115.4in | A+B+C+ (D*5) |
Measurement :
Usetubes: A+B+
Start by assembling basket G and towel rack H onto the steel pipe D.
Take the silicone tape F and affix it to the underside of the joints of basket G and the steel pipe D. The silicone tape should be placed in a way that it can be inserted into the joint.
Ensure that the silicone tape F is fully inserted into the joint. You may need to adjust the position of the silicone tape F by moving it up or the basket G down to achieve a complete insertion.
Repeat the above steps for the remaining baskets and steel pipe D to complete the combination of the four baskets and steel pipe.
First, combine the A and D poles to enable effortless length adjustments by
simply contracting or expanding.
Or flexibly increase or reduce the number of poles.
Assemble all the steel pipes and accessories
After complete assembly, you can individually adjust the basket to the
appropriate position and retighten it
Finally, adjust the final height by rotating the steel pipe A, determine the height, and then tighten it If the height does not match yet, it can also be achieved by flexiblyin creasing or decreasing poles ,and adjusting the scalable pole A& D combination length again to achieve the suitable height
Note: The final height of the Corner Shower Caddy needs to be 1 inches higher than the actual measured height, which is beneficial for placement