SPECIALIZED CREO SL Motors Ultra Lightweight High Tech e Bike Installation Guide
- June 1, 2024
- SPECIALIZED
Table of Contents
SPECIALIZED CREO SL Motors Ultra Lightweight High Tech e Bike
Specifications
- Product: Specialized SL Motors Manual Kit Mini – Advanced
- Manufacturer: Eplus
- Functions: Speed unlocking, pedal assistance, motor map variation, speed setting, real-time data viewing, wheel size adjustment, Code Immobilizer activation
- Speed Unlocking: Up to 75 km/h
Product Usage Instructions
Preliminary Check
Before installation, ensure you have the following tools: Torx wrench,
Allen key, Crank arm extractor, Cross screwdriver, Long nose pliers, Phon.
Installation Procedure for Specialized SL Mini – Advanced Kits
- Remove the HMI
- Disconnect the display connector
- Remove the motor protective casing
- Remove the pedal and then remove the crown
- Remove screws 1-2 and loosen 3 from both sides
- Locate and disconnect the display connector and speed sensor connector
- Unscrew the remaining screws from the motor and remove it, disconnect and unscrew the battery
- Connect one end of the kit to the HMI and the other end to the remaining connector
- Insert and connect the battery, position the motor and connect the display connector
- Connect the speed sensor cable to the male connector of the kit, cover it with heat shrink tubing and seal it
- Plug the female connector of the kit into the motor and fix it with hot glue
- Screw the motor back on
- Turn on the bike, check the ignition of the kit, insert it into the frame and screw the HMI back on
Mini Kit Specialized SL and Creo SL 2, Kenevo SL 2
In the Mini version, speed unlocking and pedal assistance up to 50 km/h are
offered. Note that data shown on the display may not be correct.
Advanced Kit Specialized SL and Creo SL 2, Kenevo SL 2
The Eplus Tuning app allows you to vary motor maps, unlock speed, view
real-time data, adjust wheel size, activate Code Immobilizer, set speed
limits, and more.
Frequently Asked Questions (FAQ)
-
What tools are required for installation?
Torx wrench, Allen key, Crank arm extractor, Cross screwdriver, Long nose pliers, Phon. -
What does the Mini Kit offer?
The Mini Kit offers speed unlocking and pedal assistance up to 50 km/h. -
What features does the Advanced Kit provide?
The Advanced Kit allows for varying motor maps, unlocking speed, real-time data viewing, wheel size adjustment, Code Immobilizer activation, setting speed limits, and more. -
What should I be cautious about during installation?
Avoid incorrect connection of connectors to prevent short circuits. Do not apply excessive heat to avoid damage to connectors or wiring.
SPECIALIZED SL
MOTORS MANUAL
KIT MINI – ADVANCED
PRODUCT WARRANTY
- 24 months warranty.
- It fears humidity and heat sources.
- We are liable for manufacturing defects and not for incorrect installations.
- Any firmware update, previous modification with other systems, alteration or damage to the bicycle could result in the failure of the product which can therefore neither be replaced nor refunded.
Eplus guarantees that the product does not have any original conformity defects, pursuant to Legislative Decree 206/05. The function is guaranteed up to the latest version of the original engine; before updating the ebike check compatibility.
ATTENTION
- Unlocking the speed limiter in public places such as streets, squares, cycle paths is PROHIBITED BY LAW. Therefore it is possible to activate the release in private limited places such as circuits, tracks and private properties. Mounting the device may void the bicycle’s factory warranty. The manufac-turer declines all responsibility for any damage caused to pedal assisted bicycles on which the Eplus system is mounted. The manufacturer declines all responsibility for damage to persons or things caused or in any way related to the use of Eplus.
- ALL TRADEMARKS MENTIONED IN THIS MANUAL ARE THE PROPERTY OF THEIR RESPECTIVE OWNERS. SPECIALIZED, WINDOWS, DO NOT SUPPORT, DO NOT SPONSOR, ARE NOT IN ANY WAY TO BE CONSIDERED RELATED TO OUR COMPANY.
PRELIMINARY CHECK
The following tools may be required for the installation of the Eplus kit. We recommend a preliminary check of your ebike:
- Torx wrench
- Allen key
- Crank arm extractor
- Cross screwdriver
- Long nose pliers
- Phon
INSTALLATION PROCEDURE
- The installation procedure of the Specialized SL Mini – Advanced kits always takes place in the same way.
- PLEASE NOTE: Depending on the kit installed (Mini – Advanced) some features may vary.
INSTALLATION KIT
SPECIALIZED SL and CREO SL 2, KENEVO SL 2
- Remove the HMI
- Disconnect the display connector
- Remove the motor protective casing
- Remove the pedal and then remove the crown
- Remove screws 1-2 and loosen 3 (from both sides)
- Locate the display connector and the speed sensor connector and disconnect them
- Unscrew the remaining screws from the motor and pull it out, disconnect and unscrew the battery and remove it
- Connect one end of the kit to the HMI and the other to the remaining connector
- Slide the speed sensor connectors down from the HMI seat along the battery compartment
- Insert and connect the battery, position the motor with screw 3 (from both sides) and connect the display connector
- Connect the speed sensor cable to the male connector of the kit (as shown in the figure) cover the connector with a heat shrink tubing and seal it with a hair dryer / lighter
- Plug the female connector of the kit into the motor (as shown in the figure) and fix it with hot glue
- Screw the motor back on
- Turn on the bike and check the correct ignition of the kit, insert it into the frame and screw the HMI back on
WARNINGS
- Attention, incorrect connection of the connectors can cause a short circuit, damage not covered by warranty!
- Excessive heat applied to the sheaths could melt or causing damage to the connectors and / or wiring, damage not covered by the warranty.
MINI KIT
SPECIALIZED SL and CREO SL 2, KENOVO SL 2
- In the MINI version, only the most important function will be offered: speed unlocking and pedal assistance up to 50 km/h.
- PLEASE NOTE: The kit is basic because the modification is always active and the data shown on the display are not correct.
ADVANCED KIT
SPECIALIZED SL and CREO SL 2, KENOVO SL 2
The Eplus Tuning app for Specialized SL allows you to:
- Vary the motor maps (6 different mappings from Eco to Race).
- Unlock speed.
- View data in real time.
- Set the wheel size from 2000 mm to 3000 mm.
- Activate the Code Immobilizer, which prevents the motor from being activated.
- Set a value up to 75 km/h (theoretical) for the speed.
- Set the unlocking to be active when the bike is switched on (can be activated from the Walk button, if you have the Handlebar remote, otherwise via the app).
https://cutt.ly/4RKOpBd
https://cutt.ly/CKN2ugJ
[email protected] //
www.eplus.bike
Via Pontestura 124 Camino 15020 (AL) Italy