Smartphone Mi A3 User Guide

: June 7, 2024
: Mi

Table of Contents

Android One
SIM Card Tray:
- About Dual SIM:
Important safety information
Safety precautions
EU Regulations
Google Assistant
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Smartphone Mi A3

Android One

Android One is a set of phones that meet elevated software requirements
set by Google. The Mi A3 comes with security protection integrated into
every layer, ongoing updates, and a simple interface free of duplicate apps. With an Android One certified phone, you can get to what you need
faster and be sure that your device stays fortified with updates.

Google and Android One are trademarks of Google LLC.

SIM Card Tray:

diagram, shape

About Dual SIM:

Dual 4G SIM requires the support of local telecom operator services,
and may not be available in all regions.
Supports dual nano-SIM cards. When using both SIM card slots, either
card can be set as the primary card.
Only certain regions and telecom operators support VoLTE
System updates may be applied when network optimization occurs.
For details, please refer to the system version in use on the device.
Correctly dispose of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle responsibly to promote the sustainable reuse of material resources. To safely recycle your device, please use return and collection systems or contact the retailer where the device was originally purchased.

For Environment Declaration, please refer to the link below:
http://www.mi.com/en/about/environment/

CAUTION
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO INSTRUCTIONS.

To prevent possible hearing damage,do not listen at high volume levels
for long periods.
For more important safety information, please refer to User Manual in the link below: http://www.mi.com/en/certification/

Important safety information

Read all the safety information below before using your device.
Using unauthorized cables, power adapters, or batteries can cause fire, explosion, or pose other risks.
Use only authorized accessories which are compatible with your device.
This device’s operating temperature range is 0 °C~40 °C. Using this device in the environments outside of this temperature range may damage the device.
If your device is provided with a built-in battery, don’t attempt to replace the battery yourself to avoid damaging the battery or the device.
Charge this device only with the included or authorized cable and power adapter. Using other adapters may cause fire, electric shock, and damage the device and the adapter.
After charging is complete, disconnect the adapter from both the device and the power outlet. Do not charge the device longer than 12 hours.
The battery must be recycled or disposed of separately from household waste. Mishandling the battery may cause fire or explosion. Dispose of or recycle the device, its battery and accessories according to the local regulations.
Do not disassemble, hit, crush, or burn the battery. In case of deformation, stop using the battery immediately.
– Do not short circuit the battery to avoid overheating, burns, or other personal injuries.
– Do not place the battery in the high-temperature environments.
Overheating may cause explosion.
– Do not disassemble, hit, or crush the battery to avoid battery leaks, overheating, or explosion.
– Do not burn the battery to avoid fire or explosion.
– In case of deformation, stop using the battery immediately.
Keep your device dry.
Do not try to repair the device yourself. If any part of the device does not work properly, contact Mi customer support or bring your device to an authorized repair center.
Connect other devices according to their instruction manuals. Do not connect incompatible devices to this device.
For AC/DC adapters, the socket-outlet shall be installed near the equipment and shall be easily accessible.

Safety precautions

Observe any law and rule which restricts using mobile phones in specific cases and environments.
Do not use your phone in petrol stations and explosive atmospheres and
potentially explosive environments include fueling areas, below decks on boats, fuel or chemical transfer or storage facilities, areas where the air contains chemicals or particles, such as grain, dust, or metal powders.
Obey all posted signs to turn off wireless devices such as your phone or other radio equipment. Turn off your mobile phone or wireless device when in a blasting area or in areas posted turn off “two-way radios” or “electronic devices” to avoid interfering with blasting operations.
Do not use your phone in the hospital operating rooms, emergency rooms, or intensive care units. Comply with the current rules and regulations of hospitals and health centers. Please consult your doctor and the device manufacturer to determine if operation of your phone may interfere with the operation of your medical device. To avoid potential interference with the pacemaker, maintain a separation of 15cm between the mobile phone and the pacemaker. To achieve this, use the phone on the opposite ear to your pacemaker and do not carry it in a breast pocket. Do not use your phone near hearing aids, cochlear implants, etc., to
avoid interference with medical equipment.
Respect aircraft safety regulations and turn off your phone on board the aircraft when required.
When driving a vehicle, use your phone in accordance with the relevant traffic laws and regulations.
To avoid lightning strike, do not use your phone outdoors during thunderstorms.
Do not use your phone to make calls while it is charging.
Do not use your phones in places with high humidity such as bathrooms. Doing so may result in electric shock, injury, fire, and charger damage.

Security notice
Update your phone’s operating system using the built-in software update feature, or visit our authorized service outlets. Updating software through other means may damage the device or result in data loss, security issues, and other risks.

EU Regulations

RED Declaration of Conformity
Hereby, Xiaomi Communications Co., Ltd., declares that this GSM/GPRS/EDGE/UMTS/LTE Digital Mobile Phone with Bluetooth and WiFi M1906F9SH is in compliance with the essential requirements and other relevant provisions of the RE Directive 2014/53/EU. The full text of the EU declaration of conformity could be consulted at www.mi.com/en/certification

RF Exposure Information (SAR)
This device is compliance with Specific Absorption Rate (SAR) for general
population/uncontrolled exposure (Localized 10-gram SAR for head and trunk, limit: 2.0W/kg) specified in Council Recommendation 1999/519/EC, and ICNIRP Guidelines, and RED (Directive 2014/53/EU).

During SAR testing, this device was set to transmit at its highest certified power level in all tested frequency bands, and placed in positions that simulate RF exposure in usage against the head with no separation, and near the body with the separation of 5 mm.

SAR compliance for body operation is based on a separation distance of 5 mm
between the unit and the human body. Carry this device at least 5 mm away from your body to ensure RF exposure level compliant or lower to the reported level. To support body operation, choose the belt clips or holsters, which do not contain metallic components, to maintain a separation of 5 mm between this device and your body. RF exposure compliance with any body accessory, which contains metal, was not tested and certified, and use such body-worn accessory should be avoided.

Legal Information

This device may be operated in all member states of the EU.
Observe national and local regulations where the device is used.
This device is restricted to indoor use only when operating in 5150 to 5350Mhz
frequency range in following countries:

Receiver Category 2
Ensure the power adapter used meets the requirements of Clause 2.5 in
IEC60950-1/EN60950-1 and has been tested and approved according to national or local standards.

Frequency Bands and Power

This mobile phone offers the following frequency bands in EU areas only and
maximum radio-frequency power:
GSM 900: 35 dBm
GSM 1800: 32 dBm
UMTS band 1/8: 25 dBm
LTE band 1/3/7/8/20/28/38/40: 25.7 dBm
Bluetooth: 20 dBm
Wi-Fi 2.4 GHz band: 20 dBm
Wi-Fi 5 GHz: 5150~5350MHz: 20dBm, 5470~5725MHz: 20dBm, 5725~5825MHz: 14dBm

FCC Regulations

This mobile phone complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This mobile phone has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information (SAR)
This device meets the government’s requirements for exposure to radio waves. This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy. The exposure standard for wireless devices employs a unit of measurement known as the Specific Absorption Rate, or SAR.
The SAR limit set by the FCC is 1.6W/Kg. For body-worn operation, this device has been tested and meets the FCC RF exposure guidelines for use with an accessory that contains no metal and positions the device a minimum of 1.0 cm from the body.
Use of other accessories may not ensure compliance with FCC RF exposure
guidelines. If you do not use a body-worn accessory and are not holding the device at the ear, position the handset a minimum of 1.0 cm from your body when the device is switched on.

FCC Note
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.

E-label
This device has an electronic label for certification information.
To access it, please select Settings> About Phone >Regulatory labels or select
Settings, then type “Regulatory labels ”into the search bar.

Certification Information (Highest SAR)

SAR 10g limit: 2.0 W/Kg, SAR Value: Head: 0.301 W/Kg,
Body: 1.097 W/Kg (5 mm distance).
SAR 1g limit: 1.6 W/Kg, SAR Value: Head: 1.03 W/Kg,
Body-worn: 0.99 W/Kg (10 mm distance).
Hotspot: 1.07 W/Kg (10 mm distance).

Model: M1906F9SH
1906 indicates that this product will be launched after 201906

Disclaimer
This User Guide is published by Xiaomi or its local affiliated company. Improvements and changes to this User Guide necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Xiaomi at any time and without notice. Such changes will, however, be incorporated into new editions of this User Guide. All illustrations are for illustration purposes only and may not accurately depict the actual device.