TECHNICAL GUIDE
SCHEMATIC – SMALL PARTS

SCHEMATICS – SMALL PARTS

S221200003 Stumpjumper Mountain Bike

SYMBOLS LEGEND

| PART NUMBER
---|---
| ASSEMBLY PROCESS ORDER
| INSERT PATH
| ASSEMBLY DIRECTION
| GREASE
| BLUE THREADLOCKER
| TORQUE REQUIRED
| VIDEO GUIDE AVAILABLE

SPECIALIZED BICYCLE COMPONENTS
15130 Concord Circle, Morgan Hill, CA 95037 (408) 779-6229
0000177255_SC_R1, 09/21

We may occasionally issue updates and addendums to this document. Please periodically check www.specialized.com or contact Rider Care to make sure you have the latest information.
Info: www.specialized.com

CHAIN GUIDE & CHAIN COVER MOUNTS

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE
---|---|---|---|---|---|---
Nm| in-lbf
A| Chain Guide – Mount Bracket| TERO
S221200003| 1| CHG MY22 TERO X CHAINGUIDE| N/A| N/A| N/A
B| Chain Guide – Inner Plate| | 1| | N/A| N/A| N/A
C| Chain Guide – Outer Plate| | 1| | N/A| N/A| N/A
D| Mounting Nut| | 1| M8 x 1.0 mm P| 5 mm hex| 4.5| 40
E| O-Ring| | 1| O-RING 9 mm ID x 1.5 mm W| N/A| N/A| N/A
F| Frame Mounting Bolts| | 2| M5 x 10 mm 0.8 mm P| T25 Torn| 4.5| 40
G| Mouting Bolt| | 1| M8 x 1.0 mm P, SLOT| N/A| 4.5| 40
H| Spacers| | 3| 8.2 mm ID X 12 mm OD x 1 mm W| N/A| N/A| N/A
I| Chain Cover – Frame Bracket| PART OF KIT VADO
S219900052| 1| | N/A| N/A| N/A
J| Chain Cover – Front Bracket (Vado)| 1| | N/A| N/A| N/A
K| Chain Cover – Bolts| 3| M5 mm x 10 mm x 0.8 mm P| 3 mm hex| 4.5| 40
L| Chain Cover – Frame Bracket| PART OF KIT COMO
S219900060| 1| | N/A| N/A| N/A
M| Chain Cover – Front Bracket (Como)| 1| | N/A| N/A| N/A
K| Chain Cover – Bolts| 3| M5 mm x 10 mm x 0.8 mm P| 3 mm hex| 4.5| 40

CHAIN COVER MOUNTS

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
Nm| in-lbf
A| Chain Cover – Cover| PART OF KIT VADO
S219900052| 1| | N/A| N/A| N/A|
B| Chain Cover – Chainstay Bracket| 1| | N/A| N/A| N/A|
C| Chain Cover – Bolts| 3| M5 mm x 10 mm x 0.8 mm P| 3 mm hex| 4.5| 40|
D| Chain Cover – Cover| PART OF KIT COMO
S219900060| 1| | N/A| N/A| N/A|
E| Chain Cover – Chainstay Bracket| 1| | N/A| N/A| N/A|
F| Chain Cover – Bolts| 3| M5 mm x 10 mm x 0.8 mm P| 3 mm hex| 4.5| 40|

SPIDER AND CRANK ASSEMBLY (VADO / COMO)

| PART NAME| PART NUMBER| QTY| SPEC| TOOL|  TORQUE| COMMENT

---|---|---|---|---|---|---|---
Nm| in-lbf
A| Chain Ring 48 t| S211400005| 1| Praxis 48 t – 104 mm BCD| N/A| N/A| N/A|
B| Chain Ring Bolts| 4| M8 x 6.5 mm x 0.75 mm p| 5 mm hex| 10| 89|
C| Spider| S211600026| 1| Spider,104 mm BCD| N/A| N/A| N/A|
D| Spider Groove Nut| S166800011| 1| Levo ISIS Groove Nut| ParkTool BBT-18 or Shimano TL-UN96| 50| 443|
E| Crank DS| S211600027| 1| Brose Praxis 170 mm Alloy| 8 mm hex| 40| 354|
E| Crank NDS| S211600028| 1| Brose Praxis 170 mm Alloy| 8 mm hex| 40| 354|
F| O-Ring| S221600011| 1| O-Ring, 23.5 mm ID x 2.4 mm OD, Drive Side| Grease| N/A| N/A|
G| Chainwheel Protector| S211200010| 1| Vado Chain Guard, 48t, Praxis| Phillips Head Screwdriver| N/A| N/A|
H| Brose Cap Puller| S175300006| 1| | N/A| N/A| N/A|

SPIDER AND CRANK ASSEMBLY (TERO)

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
Nm| in-lbf
A| Chain Ring 36 t| S211400003| 1| Praxis 36 t – 104 mm BCD| N/A| N/A| N/A|
B| Chain Ring Bolts| 4| M8 x 6.5 mm x 0.75 mm p| 5 mm hex| 10| 89|
A| Chain Ring 40 t (TERO EQ)| S211400004| 1| Praxis 40 t – 104 mm BCD| N/A| N/A| N/A|
B| Chain Ring Bolts (TERO EQ)| 4| M8 x 6.5 mm x 0.75 mm p| 5 mm hex| 10| 89|
H| Chainring Protector (TERO EQ)| S211200008| 1| MSC VADO CHAIN GUARD, 40T, PRAXIS| Phillips Head Screwdriver| N/A| N/A|
C| Spider| S195100001| 1| SPIDER,104 mm BCD| N/A| N/A| N/A|
D| Spider Groove Nut| S166800011| 1| Levo ISIS Groove Nut| ParkTool BBT-18 or Shimano TL-UN96| 50| 443|
E| Crank DS| S211600027| 1| Brose Praxis 170 mm Alloy| 8 mm hex| 40| 354|
E| Crank NDS| S211600028| 1| Brose Praxis 170 mm Alloy| 8 mm hex| 40| 354|
F| O-Ring| S221600011| 1| O-RING, 23.5 mm ID x 2.4 mm OD, Drive Side| Grease| N/A| N/A|
G| Brose Cap Puller| S175300006| 1| | N/A| N/A| N/A|

MOTOR COVERS

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
Nm| in-lbf
A| DS Motor Cover Assembly| Part Of Motor
Cover Kit
S219900056| 1| With moulded thru bolts| N/A| N/A| N/A|
B| NDS Motor Cover| 1| | N/A| N/A| N/A|
C| Custom Motor Cover Nut| 2| M4 x 8 mm x 0.7 mm P| T20 Torx| 1| 0.8|

MOTOR MOUNTING BOLTS

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
Nm| in-lbf
A| Mounting Bolt| S210500017| 1| M8 x 50 mm x 1.25 p Steel Black| 5 mm hex key| 23| 203|
B| Mounting Bolt Washer| 1| M8 x 8.4 mm ID x 16 OD X1.6 mm| N/A| N/A| N/A|
C| Serated Nut| 3| M8 x 1.25 p serated| 13 mm Socket Wrench| 23| 203|

MOTOR CONNECTORS

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
Nm| in-lbf
A| Blind Plug| S216800024| 1| | N/A| N/A| N/A|
B| Motor| S216800027| 1| Specialized Drive Side Loader| N/A| N/A| N/A|

It is also recommended that Nyogel 760G (special electrical contact grease) be applied to all ports at the motor.
CAUTION: Make sure all ports not used are sealed with a blind plug.

HEADSET

Cone Spacer 52.2 mm Sand Black
G| Micro Spacer| 1|
H| Compression Ring| 1| H2249 Alloy Compression Ring
I| Upper Bearing| 1| MR121 Upper 1.125” Campy 45° Cartridge Bearing
J| Lower Bearing| 1| MR127 Lower 1.5 In” Campy 36/45° Cartridge Bearing
K| Crown Race| 1| H6083 Alloy Split Style Crown Race
L| Cone Spacer| HS-S-02-1| 1| Taro 3.0| H2216 Cone Spacer 52.2 mm Sand Black
M| Micro Spacer| 1|
N| Compression Ring| 1| H2433 Alloy Compression Ring
O| Upper Bearing| 1| MR121 Upper 1.125” Campy 45° Cartridge Bearing
P| Lower Bearing| 1| MR127 Lower 1.5 In” Campy 36/45° Cartridge Bearing
Q| Crown Race| 1| H6165 Alloy Split Style Crown Race
R| Micro Spacer| HS-S-03| 2| Como 3.0 / 4.0 / 5.0|
S| Compression Ring| 1| H2564 Nylon Compression Ring
T| Upper Bearing| 1| MR121 Upper 1.125” Campy 45° Cartridge Bearing
U| Lower Bearing| 1| MR127 Lower 1.5 In” Campy 36/45° Cartridge Bearing
V| Crown Race| 1| H6091 Alloy Split Style Crown Race

STEM – FLOW STEM

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
Nm| in-lbf
A| Flow-Set Stem Faceplate Bolts & Washers| 60 mm S154800016

75 mm S154800017

| 4| | 4 mm hex key| 6| 52|
B| Flow-Set Stem Steerer Bolts & Washers| 2| | 4 mm hex key| 6| 52|
C| Flow-Set Stem Top Cap Bolt| 1| | 5 mm hex key| N/A| N/A|
D| Flow-Set Stem| 1| | N/A| N/A| N/A|
E| Flow-Set Stem Spacers| S204800004| 3| | N/A| N/A| N/A|
F| Flow-Set Stem Cone Spacer| 1| | N/A| N/A| N/A|
G| Mastermind TCD| S216800041| 1| Mastermind TCD with Remote| N/A| N/A| N/A|
H| Mastermind TCD Mount Bracket| 48119-1405| 1| | N/A| N/A| N/A|
I| Mastermind TCD Security Screw| 1| M2.5 x 5 mm x 0.45 p S Steel| Phillips Head Screwdriver| 1| 9|

STEM – STEALTH STEM

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
Nm| in-lbf
A| Stealth Stem Faceplate Bolts & Washers| S194800003| 4| | 4 mm hex key| 6| in-lbf|
B| Stealth Stem Steerer Bolts & Washers| 2| | 4 mm hex key| 6| 52|
C| Stealth Stem Top Cap and Bolt| 1| | 5 mm hex key| N/A| 52|
D| Stealth Stem| 1| | N/A| N/A| N/A|
E| Stealth Stem Spacers| Part of HS| 3| | N/A| N/A| N/A|
F| Stealth Cone Spacer| 1| | N/A| N/A| N/A|
G| Master Mind TCD| S216800041| | Master Mind TCD with remote| N/A| N/A| N/A|
H| Master Mind TCD Mount Screw and Nut| S219900057| 1| Nut: M3 S Steel Bolt: M3 x 11 x 0.75 p| 2.5| N/A| N/A|
I| Master Mind TCD Mount Bracket (Stealth Stem)| 1| Dovetail Mount and Twist lock Mount| N/A| N/A| N/A|
J| Master Mind TCD Security Screw (Stealth Stem)| 1| M2.5 x 5 mm x 0.45 p S Steel| Phillips Head Screwdriver| 1| N/A|

INTEGRATED HANDLEBAR – COMO

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
Nm| in- lb
A| Integrated Handlebar| S210800013| 1| Integrated Handlebar| N/A| N/A| N/A|
B| Handlebar Locking Clamp| 1| Locking Cap, 28.6 mm| N/A| N/A| N/A|
C| Handlebar Clamp Bolts| 4| M5 x 16 mm x 0.8mm P| TX 25| 6.2| 55|
D| Steerer Locking Clamp Cover| PART OF KIT
S219900014| 1| | N/A| N/A| N/A|
E| Top Cap| 1| TOP CAP, COMO SL INTEGRATED BAR| N/A| N/A| N/A|
F| Top Cap Bolt| 1| | 5 mm HEX| N/A| N/A|
G| Stem Spacer| S212500002| 1| | N/A| N/A| N/A|

INTEGRATED HANDLEBAR – COMO – MASTERMIND TCU

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
Nm| in- lf
A| MM TCD Handlebar Mount| S219900014| 1| | N/A| N/A| N/A| Use to cover the displays mount when no TCD is fitted
B| MM TCD Handlebar Mount Screws| 2| M3 x 18 mm 0.5 mm p| 3 mm HEX| N/A| N/A|
C| MM TCD Twist lock Mount Base| S220800009| 1| | N/A| N/A| N/A| Use thread lock. Do not over-torque.
D| MM TCD Westlock Mount Top| S219900057| 1| | N/A| N/A| N/A| Use the upper part of the Stealth Stem MM TCD mount
E| MM TCD Westlock Mount  Screw and Nut| 1| Nut: M3 S Steel | Bolt: M3 x 11mm x 0.75 mm p| 2.5 mm hex key| N/A| N/A
F| MM TCD Westlock Mount Security Screw| 1| M2.5 x 5 mm x 0.45 p S Steel| Phillips Head Screwdriver| 1| 9
G| Masterminds TCD with Remote| S216800041| | MasterMind TCD with remote| N/A| N/A| N/A|

ICR – HEADTUBE PORTS

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
Nm| in- lb
A| ICR Port Inversely 2 Cable Port| PART OF KIT
S216500008| 2| | N/A| N/A| N/A|
B| ICR Port Screw| 2| M3 x 18 mm x 0.5 mm p| T10 Torn| 0.8| 7|
C| ICR Port Universal Base| 2| | N/A| N/A| N/A|

ICR – DOWNTUBE GUIDE

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
Nm| in- lb
A| ICR Downtube Guide| PART OF KIT S216500008| 1| 2 x 3.5 / 3 X 4.0mm / 1 x 5.0 mm Self Adhesive| N/A| N/A| N/A|

BATTERY LOCK AND CONNECTORS

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
Nm| in- lb
A| Lower Battery Lock Mechanism| S216800036| 1| | N/A| N/A| N/A|
B| Motor / Battery Cable| S216800034| 1| | N/A| N/A| N/A|
C| Motor / Battery Cable Bolts| 2| M3 x 8 mm x 0.5 mm p / 304 S Steel| 2 mm hex key| 1| 8.8|
D| Radar Y Splitter Cable| S216800033| 1| Y-Splitter 3 Cables| N/A| N/A| N/A|
E| Radar Splitter Cable Bolt| 1| M4 x 16 mm x 0.7 mm p| 3 mm hex key| 2| 18|
F| Lock Replacement Cylinder| S219900051| 1| | | | |

BATTERY LOCK AND HOOK

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE
---|---|---|---|---|---|---
Nm| in-lbf
A| Battery Charge Port Cover| S216800035| 1| | N/A| N/A| N/A
B| Battery Cover Mount Bracket| 1| | N/A| N/A| N/A
C| Battery Charge Port Cover Screws| 3| M2 x x 10 mm x 0.45 mm p| 1.5 mm hey Key| 1.5| 13.2
D| Battery Lever| 1| | N/A| N/A| N/A
E| Battery Lever Bolt| 1| M4 x 25 mm x 0.7 mm p| 3 mm hex key| 3| 26.5
F| Battery Charger Magnetic Flap| 1| Available Separately S216800051| N/A| N/A| N/A
G| Downtube Battery Seal| S219900053| 1| | N/A| N/A| N/A
H| Battery Mount Lower| S216800036| 1| Battery lock| N/A| N/A| N/A
I| Battery Mount Screws| 3| M4 x 18 mm x 0.7 mm p| T20 Torn| 4| 35
J| Battery Mount Upper| S216800040| 1| BATTERY HOOK| N/A| N/A| N/A
K| Battery Mount Screws| 3| M4 x 18 mm x 0.7 mm p| T20 Torx| 3.3| 29
L| Battery Mount Screws Kit| S210500015| 3| M4 x 18 mm x 0.7 mm p| T20 Torx| 4| 35

KICKSTAND

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
Nm| in- lf
A| Kickstand (TERO)| S219900050| 1| Taro| N/A| N/A| N/A|
B| Kickstand Bolts| 2| M6 x 14 mm x 1.0mm S Steel / 1mm Washer S Steel| M5 hex key| 9| 80|
C| Kickstand (VADO)| S179900045| 1| Valdo / Como| N/A| N/A| N/A|
D| Kickstand Bolts| 2| M6 x 14 mm x 1.0mm S Steel / 1mm Washer S Steel| M5 hex key| 9| 80|
E| Kickstand Mooting Plate| S219900062| 1| MY22 Como Kickstand Hardware Kit| N/A| N/A| N/A| Place the kickstand plate between the kickstand mount and the inside of the chain stay
F| Kickstand Plug (Not shown)| S219900005| 2| | N/A| N/A| N/A| Plugs for unused kickstand mount on non-EQ models

REAR RACK

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
Nm| in-lbf
A| Rear Rack 700c (TERO)| S211700003| 1| SPL48 – 700c – 27 kg| N/A| N/A| N/A|
B| Rear Rack 650b (VADO / COMO)| S211700001| 1| SPL47 – 650b – 27 kg| N/A| N/A| N/A|
C| Mooting Bolts| | 2| M5 mm x 5 mm| 5 mm hex| 9| 80|

• The rear rack is combined with the rear fender and is attached with bolts to mounting tabs at the dropouts to support the vertical rack stays.

| | | | | | TORQUE|
---|---|---|---|---|---|---|---
#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| Nm| in-lbf| COMMENT
A| Vado /Como Fender Front 650B (Sun tour Fork)| S212200008| | Use with Sun tour Fork / 65C width| N/A| N/A| N/A|
Vado /Como Fender Front 650B (SRAM Fork)| S212200007| | Use with SRAM Fork / 65C width| N/A| N/A| N/A|
Vado /Como Fender Rear 650B (STD)| S212200009| | Use with Vado 3.0 & 4.0 models / 65C width| N/A| N/A| N/A|
Vado /Como Fender Rear 650B (Garmin)| S212200010| | Use with Vado 5.0 models equipped with Garmin Radar / 65C width| N/A| N/A| N/A|
Tero Fender Front 700C| S212200005| | OE spec on Tero 4.0 EQ models / 65C width| N/A| N/A| N/A|
Tero Fender Rear 700C| S212200006| | OE spec on Tero 4.0 EQ models / 65C width| N/A| N/A| N/A|
B| Mooting Bolt Chain stay Bridge| Part of individual Kits| 1| M5 mm x 5 mm (Included with kit)| 4 mm hex| 4| 35|
C| Mooting Bolt Seat stay bridge| 1| | 4 mm hex| 4| 35|

FRONT RACK

| | | | | |  TORQUE| COMMENT
---|---|---|---|---|---|---|---

| PART NAME| PART NUMBER| QTY| SPEC| TOOL| Nm| in-lbf|

A| Headset Cover| See Details| 1| carious Colour Models| N/A| N/A| N/A|
B| Headset Cover Bolt| 1| Custom Screw M5 x 5 mm x 0.8 mm p| 2.5 mm HEX| 1| 8.8|
#| PART NAME| PART NUMBER| QTY| SPEC
---|---|---|---|---
A| Headset Cover| S229900001| 1| MSC MY22 COMO HEADTUBE COVER, LIMESTONE / BLACK REFLECTIVE
| | S229900002| 1| MSC MY22 COMO HEADTUBE COVER, SAND / BLACK REFLECTIVE
| | S229900003| 1| MSC MY22 VADO/TERO HEADTUBE COVER, CAST BLACK / SILVER REFLECTIVE
| | S229900004| 1| MSC MY22 VADO/TERO HEADTUBE COVER, OAK GREEN METALLIC / SMOKE
| | S229900005| 1| MSC MY22 VADO/TERO HEADTUBE COVER, RED ONYX / SMOKE

| PART NAME| PART NUMBER| QTY| SPEC

---|---|---|---|---
A| Headset Cover| S229900006| 1| MSC MY22 VADO/TERO HEADTUBE COVER, RED TINT / SILVER REFLECTIVE
| | S229900007| 1| MSC MY22 VADO/TERO HEADTUBE COVER, REDWOOD / BLACK
| | S229900008| 1| MSC MY22 VADO/TERO HEADTUBE COVER, SMOKE / BLACK REFLECTIVE
| | S229900009| 1| MSC MY22 VADO/TERO HEADTUBE COVER, WHITE MOUNTAINS / BLACK REFLECTIVE
| | S229900010| 1| MSC MY22 VADO/TERO HEADTUBE COVER, WHITE MOUNTAINS / GUNMETAL

FRONT FENDER

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| TORQUE| COMMENT
---|---|---|---|---|---|---|---
A| Vado /Como Fender Front 650B (Suntour Fork)| S212200008| 1| Use with Suntour Fork / 65C width| | Nm| in-lbf|
Vado /Como Fender Front 650B (SRAM Fork)| S212200007| 1| Use with SRAM Fork / 65C width| | | |
Vado /Como Fender Rear 650B (STD)| S212200009| 1| Use with Vado 3.0 & 4.0 models / 65C width| | | |
Vado /Como Fender Rear 650B (Garmin)| S212200010| 1| Use with Vado 5.0 models equipped with Garmin Radar / 65C width| | | |
Tero Fender Front 700C| S212200005| 1| OE spec on Tero 4.0 EQ models / 65C width| | | |
Tero Fender Rear 700C| S212200006| 1| OE spec on Tero 4.0 EQ models / 65C width| | | |
B| Mouting Bolt Fork Arch| Part of Fender Kit| 2| | 4 mm hex| 4| 35|
C| Mooting Bolt Fork| 2| | 4 mm hex| 4| 35|

GARMIN RADAR

| PART NAME| PART NUMBER| QTY| SPEC| TOOL|  TORQUE| | COMMENT

---|---|---|---|---|---|---|---|---
A| Garmin Radar Mount| S211700002| 1| | 3 mm hex| Nm| in-lb|
B| Garmin Radar Mount Bolts| 2| M4 x 5 mm x 0.7 mm p| 2 mm hex| | |
C| Garmin Radar Rack Mount Bolt| 2| M3 x 14 mm x 0.5 mm p| | | |
D| Integrated Rear Light| S225800006| 1| LGT REAR, SPANNIGA COMMUTER GLOW R581001, INTEGRATED RACK MOUNT, W/O WIRE| | | |
E| Integrated Rear Light Cable| S216800037| 1| ELE MY22 VADO/TERO REAR LIGHT CABLE, 12V, 2 WIRES| | | |

SEATPOST

| | | | | |  TORQUE|
---|---|---|---|---|---|---|---

| PART NAME| PART NUMBER| QTY| SPEC| TOOL| Nm| in-lbf| COMMENT

D| Seatpost Clamp (VADO / TERO)| S184700003| 1| 34.9 mm with bolt| 4 mm hex| 6.2| 55|
E| Seatpost Clamp (COMO)| S214700006| 1| 42.9 mm with bolt| 4 mm hex| 6.2| 55|
F| Seat Tube Shim (COMO ONLY Not Shown)| S174900001| 1| 30.9mm to 34.9mm shim COMO ONLY| N/A| N/A| N/A| for suspension posts on COMO 4.0 and 5.0 models

MINIMUM INSERTION (A)
The seatpost must be inserted into the frame deep enough so the minimum insertion/maximum extension (min/max) mark (C) on the seatpost is not visible. The frame requires a minimum of 80 mm of insertion (A).
MAXIMUM INSERTION (B)
The seat tube is reamed to a specified maximum insertion depth for each frame size. This ream depth limits the insertion depth of the seatpost. If the desired seat height cannot be achieved within the minimum and maximum insertion requirements, the seatpost should be replaced with a shorter or longer one.

| | | | | | TORQUE|
---|---|---|---|---|---|---|---
#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| Nm| in-lbf| COMMENT
A| Speed Sensor Cable| S216800025| 1| Speed Sensor Cable| N/A| N/A| N/A|
B| Speed Sensor Cable Holder| S216800038| 1| 5 mm Cable Bat| N/A| N/A| N/A|
C| Speeds Sensor Cable Holder Screw| 1| M4 x 8 mm x 0.7 mm p,| 3 mm| 1| 9|

WARNING! Dirt and/or metal debris may accumulate on the speed sensor magnet. Too much accumulation may result in interruptions in motor support and/or inaccurate speed readings. Regularly check your speed sensor magnet for an accumulation of dirt  and/or metal debris, and clean accordingly. The frequency of the cleaning depends on your riding conditions, ride frequency, and/or brake pad material. Removing metal debris may require the use of a magnet stronger than the speed sensor magnet.

SPEED SENSOR – DROPOUT

| | | | | | TORQUE| COMMENT
---|---|---|---|---|---|---|---
#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| Nm| in-lbf|
A| Speed Sensor Cable| S216800025| 1| Speed Sensor Cable| N/A| N/A| N/A|
B| Speed Sensor Centerlock Mag Holder| S199900012| 1| | Cassette lock ring tool| 40| 354| Use the brake rotor mounting bolts
C| Speed Sensor 6 Bolt Mag Holder| S216800039| 1| Use Rotor Bolts| as per manufacturer specs| 6.2| 55|
D| Speed Sensor Cable Holder| S216800038| 1| 5 mm Cable Bat| N/A| N/A| N/A|
E| Spees Sensor Cable Holder Screw| 1| M4 x 8 mm x 0.7 mm p,| 3 mm| 1| 9|

WARNING! Dirt and/or metal debris may accumulate on the speed sensor magnet. Too much accumulation may result in interruptions in motor support and/or inaccurate speed readings. Regularly check your speed sensor magnet for an accumulation of dirt  and/or metal debris, and clean accordingly. The frequency of the cleaning depends on your riding conditions, ride frequency and/or brake pad material. Removing metal debris may require the use of a magnet stronger than the speed sensor magnet.
When assembling the rear brake disc, the speed sensor magnet must be installed on the rotor. Four of the six bolts are standard rotor bolts.
The remaining two bolts (M5 x 0.8 pitch x 15 mm length, with a countersunk flat head) attach the speed sensor magnet to the rotor.

DERAILLEUR HANGER & CHAINSTAY GUARD

#| PART NAME| PART NUMBER| QTY| SPEC| TOOL| Nm| in- lb| COMMENT
---|---|---|---|---|---|---|---|---
A| Amazing Derailleur Hanger 2.1| S172600003| 1| | 8 mm hex| 25| 221| Use thread lock
B| Chain stay protector| S216900004| 1| | N/A| N/A| N/A| Align the hole on the protector with the chain guard mooting bolt on the DS chain stay

ERROR CODES & FACTORY RESET

Master Mind TCU equipped models have a built-in diagnostic system to automatically check and identify the functionality of the system. If the system detects an error, the Master Mind TCU will show the error on the display. In some cases, the error message can  be dismissed by pushing any button on the remote.
Depending on the type of error message, the system may be switched off automatically. If you receive an error message, please restart the system. If the error message continues to display, please contact your Authorized Specialized Retailer for further  instructions. In any case, the bicycle can be ridden without motor support with the system turned off.
Mission Control supports the rider with User Actions for errors and diagnostic reports which can be shared with retailers who can give further advice based on the bicycle serial number.

MASTERMIND TCU RESET PROCESS:
Standard Reset
Standard reset is the first troubleshooting step if an odd bike or display behavior occurs, such as failing to connect to MC after a previously successful connection.
Standard reset restores the default Tune settings, including Acceleration Response and Shuttle.

• Dual press and hold the (+) and (-) buttons for 20 seconds.
• Release the buttons when the Master Mind TCU reboots.

Factory Reset
A factory reset should be performed before a new or used bicycle is handed over to a new rider. Factory Reset restores the system to factory settings, also clearing and resetting previous BLE pairings.

• Press and hold the (+) and (-) buttons for 45 seconds. During this process, the MasterMind TCU will reboot twice.
• Release the buttons when the MasterMind TCU reboots for the second time.

SERVICE PARTS

VADO / COMO / TERO| | NUMBER| PART SPECIFICATION|
---|---|---|---|---
PART NAME| BIKE| PART DESCRIPTION
Battery| Vado I Como / Tero| 98921-5634| Specialized U2-710 Battery (Service- AMI Single pack (sec-201| Smaller 530Wh 1sec-191 battery not carried as a Service or AM part
Battery Charge Port Cover| Vado / Como / Tero| 5216800035| ELE MY22 VADOITERO CHARGE PORT COVER W/ LATCH| Charge port cover with latch
Battery Charge Port Door| Vado I Como / Tero| 5216800051| ELE MY22 VADO TERO CHARGE DOOR| Charge port magnetic cover
Battery Downtube Rim| Vado / Como / Tero| 5219900053| MSC MY22 VADOITERO DOWNTUBE BATTERY COVER| Single cover for all frames & sizes & capacity batteries
Battery latch mounting hardware| Vado / Como / Tero| 5210500017| BLT MY22 VADOITERO BATTERY LATCH MOUNTING HARDWARE| For Vado Como Tero
Battery lock Cylinder| Vado / Como / Tero| 5219900051| MSC MY22 VADOITERO BATTERY LOCK CYLINDER(5599 06 951| Battery lock cylinder used on all bikes
Battery lower Mount with Lock| Vado / Como / Tero| 5216800036| ELE MY22 VADOITERO LOWER BATTERY MOUNT WI LOCK HARDWARE| Lower battery mount with lock
Battery upper Mount| Vado I Como / Tero| 5216800040| ELE MY22 VADO/TERO UPPER BATTERY MOUNT W/HARDWARE| Battery mount
Battery Wedge| Vado I Como / Tero| 5226800013| ELE SUB. BATTERY WEDGE. M1 & U2. REV 2| Battery rubber wedge/pin at the top of the battery that holds top of battery in the frame.
Belt Drive| | 5219900009| MSC MY21 COMO SL BELT. CDX. 122T| Carbon Belt for IGH equipped Models
Cable – Battery to Radar| Vado / Como / Tero| $216,800,033| ELE MY22 VADO 5 & S.3 CABLE Y SPLITTER FOR RADAR| Splitter for Garmin Radar equipped models
Cable – Motor to Battery| Vado / Como / Tero| S216800034| ELE 14Y22 VADOITERO BATTERY TO MOTOR CABLE| For Vado 3.0 4.0 For Como 3.0 4.0 all Tern Models
Cable – Motor to Display| Tero| 5194200010| ELE MY19 LEVO FSR. CABLE FOR MOTOR TT-DISPLAY.BROSE MOTOR HMI| Motor-to-Display cable, all models
Cable Motor Display| Como| 5194200010| ELE MY19 LEVO FSR. CABLE FOR MOTOR TT- DISPLAY.BROSE MOTOR HMI| Display-to-Motor cable (shared part with Gen. 2 Leva & original TCD-w System for Vado/Como)
Chain Cover (Como)| Como| S219900060| MSC MY22 COMO CHAIN COVER| Chain cover for all models
Chain Cover (Vado Tero)| Vado I Tero E0| $216,900,004| CSP MY22 VADO/TERO CHAINSTAY PROTECTOR. CO-MOLDED| Chain cover for all models
Chain Cover (Vado Tirol| Vado Tero| S219900052| MSC MY22 VADOITERO CHAIN COVER| Chain guard for Vado and Tero 4.0 E0
Chain Guide (Non ED)| Tero non E0| $221,200,003| CHG MY22 TERO HT CHAIN GUIDE. FRAME MOUNTED. 38-32T. W/ MOUNTING BOLTS| Frame mounted chain guide for non-ED models
Chainring (Tero ED)| Tero E0| S211400004| CHR VADO. PRAXIS 40T. 104BCD. SINGLE WAVE STYLE 10/11 SPEED. WI BOLTS| 40T chainring equipped on Tero 4.0 E0 models
Chainring (Tero)| Tero| S211400003| CHR MY22 TERO. PRAXIS. 36T. 104BCD. STL. WI BOLTS| 36T chainring equipped on most models
Chainring (Vado Como)| Vado / Como| 5211400005| CHR VADO. PRAXIS 481 104BCD. SINGLE WAVE STYLE 10/11 SPEED. WI BOLTS| Stock chainring for all nonlight models
Chainring Guard 48 t| Vado / Como / Tero| S211200010| CHG VADO CHAIN GUARD. 48T. PRAXIS| Same as S179900050 Does not include the mounting bolts I52205000021
Chainring Guard 48 t| Vado I Como / Tero| 5179900050| MSC MY17 VADO 48T PLASTIC BASH GUARD| Same as S211200010 Does not include the mounting bolts (S220500002)
Chainring Guard 48 t (Tero E0)| Tero E0| S211200008| CHG VADO CHAIN GUARD. 40T. PRAXIS| 40T chainring equipped on Tero 4.0 E0 models
Chainring Mount Screws| Vado I Como / Tero| S220500002| BLT MY17-MY21 VADO/COMO FOR 40T & 48T PLASTIC| Screws for mounting plastic chainring guard to Praxis Chainring
Cranks| Vado / Como / Tero| 5211600027| CRK MY22 VADO/TERO FORGED ALLOY. PRAXIS. DRIVESIDE. 170MM| Single length for all models & sizes
Cranks| Vado / Como / Tero| S211600028| CRK MY22 VADOITERD FORGED ALLOY. PRAXIS. NON DRIVESIDE. 170MM| Single length for all models & sizes
Derailleur Hanger| | 5172600003| HGR MY17 DER HANGER AMAZINGER 2.1| R. Derailleur hanger for all Nonlight Models
Dropout Cover (IGH(| Vado I Como| S219900054| MSC MY22 VADOITERO DROPOUT COVER| DS & NH sliding drop-out cover kit for IGH equipped models
Fender Front 700C| Tero (EDI| S212200006| FND MY22 TERO REAR FENDER SET| OE spec on Tern 4.0 ED models 65C width
Fender Front 6508 (SRAM)| Vado / Como| S212200007| FND MY22 VADO 650B FRONT FENDER SET FOR SRAM FORK| Vado 5.0 models equipped with Sram fork 65C width
Fender Front 650B (Subtour| Vado / Como| S212200008| FND MY22 VADO 650B FRONT FENDER SET FOR SUNTOUR FORK| Vado 3.0 & 4.0 models equipped with SR Sun tour fork 65C width
Fender Front 700C| Tero (EDI| S212200005| FND MY22 TERO FRONT FENDER SET| OE spec on Tern 4.0 ED models 65C width
Fender Rear 6508| Vado I Como| S212200009| FND MY22 VAN 650B REAR FENDER SET| Vado 3.0 & 4.0 models 65C width
Fender Rear 6508 ( Garmin)| Vado I Como| S212200010| FND MY22 VADO 650B REAR FENDER SET WITH HOLE FOR GARMIN RADAR| Vado 5.0 models equipped with Garmin Radar 65C width
Frame lock kit| Vado / Como / Tero| S210500016| BLT MY22 VADOITERO FRAME LOCK HARDWARE KIT| For Vado Como Tero
Garmin Radar Mount| Vado I Como| S211700002| CRR MY22 VADO GARMIN RADAR BRACKET WITH HARDWARE| Bracket to mount Garmin Radar on rear Fender • bolts to underside of rear rack for Vado / Como 5.0 OE spec only on Tero 4.0 E0 models
Handlebar (Como)| Como| S210800013| BAR MY22 COMO HANDLEBAR. 680M14| Different than Como SL handlebar with Externally routed cables

TORQUE SPECIFICATIONS & GUIDE TUBE LENGHTHS

Handlebar (Tero)| | 5210800011| BAR MY22 TERO 1D-MTB445A.LOW RISE.31.8MM.BACK SWEEP 8DEG.RISE 27MM.UP SWEEP 6DEG. 750MM| Handlebar equipped on all models (size Small use narrower 720mm widthl
---|---|---|---|---
Handlebar (Vado)| Vado| 5210800012| BAR MY22 VADO 1D•MTB556A.31.8MM.BACK SWEEP 15DEG.RISE 46MM.UP SWEEP 5DEG, 680MM| Handlebar equipped on all Vado models
Handlebar Clamp| Como| 5220800005| BAR MY21 COMO Sl, HANDLEBAR CLAMP ASSEMBLY. WI BOLTS| Clamp & bolts to secure handlebar to fork steerer (shared part with Como SLI
Handlebar Top Cap| Como| 5219900014| MSC MY21 COMO SL TOP CAP. DISPLAY MOUNT. HANDLEBAR COVER KIT| Baseplate to attach TCDw mount
(Como)| Como| S212500025| , HDS COMPLETE. INTEGRATED. 1-1/8″ UPPER BRG (45X45). 1.5″ LOWER BRG136X451. 20MM TALL CONE TOP COVERHeadset WI CROWN RACE FOR 1.5″ TAPERED STEERER (HS-S-03)| Headset for all Como models
Headset (Tero)| Tero 4.0 5.0| S212500021| NDS COMPLETE. INTEGRATED. 1-1/8″ UPPER (45X45). 1.5″ LOWER (36%45). 52MM TOP COVER IH22151. WI CROWN RACE FOR 1.5″ TAPERED STEERER (HS-S-02)| Headset for tapered 1.5″ steerer fork • for Tero 4.0 and 5.0 models
Headset (Tero)| Tero 3.0| S212500022| HDS COMPLETE. INTEGRATED. 1-1/8″ UPPER (45X45). 1.5″ LOWER (36X45). 52MM TOP COVER IH22151. W/CROWN RACE FOR 1-118″ STRAIGHT STEERER (HS-S-02-1)| Headset for 1.1/8″ straight steerer fork • for Tero 3.0 models
Headset (Vado)| Vado| S212500020| HDS COMPLETE. INTEGRATED.)-118″ UPPER (45X45). 1.5″ LOWER (36X45). WI SPLIT CROWN RACE (NO TOP COVERI (HS-S-01)| Headset assembly for all models • Does not include FlowSet compatible top cover
Headset Cone Spacer| Vado / Tero| 5154800020| STM MY15 SIRRUSNITA FLOW-SET STEM CONE SPACER 52MM OD 15MM HEIGHT| 52mm OD headset top cover
Headset Stem Spacer| Como| S212500002| HDS SUB. 20MM HEADSET SPACER FOR COMO SL| Headset spacer
Headset Stem Spacer| Vado I Tero| 5154800007| STM MY15 TURBO / SIRRUS /VITA FLOW-SET STEM SPACER 10MM| 10 mm FlowSet steerer spacer
Headset Stem Spacer| Vado / Tero| S154800008| STM MY15 TURBO/ SIRRUS /VITA FLOW-SET STEM SPACER 5MM| 5 mm FlowSet steerer spacer
Headtube Cover| Vado I Como / Tero| 5229900001| MSC MY22 COMO HEADTUBE COVER. LIMESTONE / BLACK REFLECTIVE|
Headtube Cover| Vado I Como I Tero| 5229900002| MSC MY22 COMO HEADTUBE COVER. SAND / BLACK REFLECTIVE|
Headtube Cover| Vado / Como I Tero| 5229900003| MSC MY22 VADO/TERO HEADTUBE COVER. CAST BLACK / SILVER REFLECTIVE|
Headtube Cover| Vado I Como I Tero| 5229900004| MSC MY22 VADO/TERO HEADTUBE COVER. OAK GREEN METALLIC / SMOKE|
Headtube Cover| Vado I Como / Tero| 5229900005| MSC MY22 VADD/TERO HEADTUBE COVER. RED ONYX/ SMOKE|
Headtube Cover| Vado / Como / Tero| 5229900006| MSC MY22 VADO/TERO HEADTUBE COVER. RED TINT / SILVER REFLECTIVE|
Headtube Cover| Vado / Como I Tero| 5229900007| MSC MY22 VADDITERO HEADTUBE COVER. REDWOOD / BLACK|
Headtube Cover| Vado I Como / Tero| 5229900008| MSC MY22 VADO/TERO HEADTUBE COVER. SMOKE / BLACK REFLECTIVE|
Headtube Cover| Vado I Como I Tero| 5229900009| MSC MY22 VADD/TERO HEADTUBE COVER. WHITE MOUNTAINS / BLACK REFLECTIVE|
Headtube Cover| Vado I Como I Tero| 5229900010| MSC MY22 VADD/TERO HEADTUBE COVER. WHITE MOUNTAINS / GUNMETAL|
HUB (Non IGH)| Vado / Como I Tero| 5202100001| FHB BEAR PAWLS. TA. SHIMANO 10•SPD. STEEL. 3 PAWL (HF11•0001) (BMB-0041201A / BEB-51412P1A1| FHB for rear wheel of non-IGH Vado 4.0 & 5.0 Como 4.0 5.0
ICR Routing Kit| Vado / Como / Tero| 5216500008| CBG MY22 VADO/TERO CABLE ROUTING KIT| Cable guide kits for all models
Kickstand (Tero)| Tero| S219900050| MSC MY22 TERD HT KICKSTAND. MAINSTAY MOUNT, 362MM. W/BOLTS| OE spec on Tero 4.0 E0 models
Kickstand (Vado Como)| Vado / Como| S179900045| MSC MY17 VADD SPECIALIZED REAR 40MM. BLACK. W/ THREADS IN KICKSTAND. W/O BOLTS. W/ PLASTIC FOOT
‘
BLACK| Kickstand used on all models
Kickstand Blind Plugs| Tero| 5219900005| MSC KICKSTAND PLUG FOR LEVO HT, CREO SL E5 AND VADO SL (2 PIECES)| Plugs for unused Kickstand mount on non-ED models
Kickstand Plate| Vado I Como I Tero| S219900062| MSC MY22 COMO KICKSTAND HARDWARE KIT| Plate that sits on inside of NDS chain stay to protect the speed sensor cable from the brake rotor. Plate sits between the frame and the kickstand. Used on non-IGH Models
Master mind TCD Handlebar Mount| | 48119.| TURBO CONNECT DISPLAY – MTB MOUNT| 31.8mm handlebar mount for MasterMind TCD-w
Mastermind TCD| Vado I Como I Tero| 5216800041| ELE TCD-W 2. WIRED DISPLAY WITH REMOTE| MasterMind TCD
MasterMind TCD Mount| Como| 5220800007| BAR SUB. TCD-W 2 HANDLEBAR MOUNT BASEPLATE. FOR MY22 COMO. PLASTIC. W/O BOLT| Baseplate mount for mono-bar assembly for TCD-w 2 display
MasterMind TCD Stealth Stem Mount| Como I Tero| 5219900057| MSC TCD-W 2. STEALTH STEM MOUNT| Contains adapter to mount TCD-w 2 display to the baseplate • includes the bolt & nut
Motor| Vado I Como I Tero| S2I 6800027| ELE MY22 SPECIALIZED DRIVE C HAG HORIZONTAL 25KMH| 2.0E – 50 Nm Max Torque (E57028) Vado 3.0 models I Tero 3.0 models
Motor| Vado I Como I Tero| S2I 6800028| ELE MY22 SPECIALIZED DRIVES HAG HORIZONTAL. 25KMH| 2.2 – 90 Nm Max Torque (E06855) Vado 5.0 models I Tero 5.0 models
Motor| Vado I Como I Tero| S2I 6800029| ELE MY22 SPECIALIZED DRIVE T MAG HORIZONTAL. 25KMH| 2.0 – 70 Nm Max Torque (E57026) Vado 4.0 models I Tero 4.0 models
Motor| Vado I Como I Tero| 5226800003| ELE MY22 SPECIALIZED DRIVE T MAG HORIZONTAL. 28MPH (USA SPECI| 2.0 – 70 Nm Max Torque (G23959) USA Spec Vado 4.0 models
Motor Bolts| Vado I Como I Tero| S2I 0500015| BLT MY22 VADO/TERO MOTOR MOUNTING HARDWARE KIT| For Vado Como Tero
Motor Covers| Vado / Carol Tero| 5219900056| MSC MY22 VADOITERO MOTOR COVER KIT| DS & NDS motor cover kit. includes bolts
---|---|---|---|---
Motor Port Blind Plugs| Como| 5216800024| E LE (BIKE BROSE MOTOR LIGHT SOCKETS BLIND PLUGS| Light socket blind plugs [1 pcs per part il)
Rear Light [Rack Integrated)| Vado/ Carol Tem| 5225800006| LGT REAR. SRUINIGA COMMUTER GLOW R581001. INTEGRATED RACK MOUNT, W/O WIRE| Rear light integrated into the rear rack. Does NOT include the light wire. that is available separately as 521 6800037.
Rear light Cable| Vado / Carol Tem| 5216800037| ELE MY22 VADO/TERO REAR LIGHT CABLE. 11V, 2 WIRES| Rear light wire for Spanniga integrated rear rack light
Rear Rack| Vado / Carol Tem| 5211700003e| CRR M122 VADO REAR RACK W/ HARDWARE| Rear rack w/mount for Spanniga integrated tail-light
Rim (Como)| Como| S2I3700010| RIM TURBO. 650B, FRONT &REAR. ALLOY 32H, DISC, 30MM INTERNAL 150301- BLACK Wi TURBO DCL| Front & Rear rims for all models
Rim (Tero)| Tero| 5213700011| RIM TURBO. 29. FRONT & REAR, ALLOY, 32H, DISC, 25MM INTERNAL IS111.28 OS) – BLACK| Front & Rear rim for all models
Rim (Vado)| Vado| 5213700010| RIM TURBO. 650B, FRONT & REAR. ALLOY 32)1, DISC, 30MM INTERNAL ISE1301- BLACK Wi TURBO DCL| Front & Rear rim for Vado
Seat Collar [Como)| Como| 5214700006| SIC 42.9MM. KCNC.SPL-SCO2-429-02. EXTRUDED. 1075-173, BLACK ZINC BOLT, BOLT CLAMP TYPE| Seatpost binder/clamp for all Como models
Seat Collar (Vado Tirol| Vado / Tem| 5184700003| SIC MY18 EPIC SEAT COLLAR 14.9 MM WITH 11 BOLT| 34.9 mm seatpost collar for Vado
Seatpost (Como)| Como| 5214900010| SIP 34.9MM. 500MM LENGTH. OFFSET 544M, 1D- SP2OIXFORGED.6061-T6 TUBE & HEAC1.2-801.T CLAMP| Stock rigid post on MY22 Como 3.0 models Suspension seatposts not stocked as a service part
Seatpost [Veda Leroy| Vado / Tem| 5214900008| SIP SEAIPOST ALLOY 30.9 MM, OFFSET 0MM. 400MM, 2 BOLT CLAMP| Rigid seatpost OE on Vado Tem 3.0 models
Seatpost Dropper (Tero(| Tero| 5214900001| SIP .10-S8CO2, 30.9.OFFSET 0MM,360MKTRAVEL T00MM.W/0 REMOTE LEVER| Tero 4.0 and 5.0 Size S
Seatpost Dropper (Tero)| Tero| 5214900002| SIP .10-SEICO2, 30.9.OFFSET OMM,400MKTRAVEL 120MM.W/0 REMOTE LEVER| Tero 40. and 5.0 Size M/L/XL
Seatpost Dropper Cable Barrel (Knarp)| Tero| 5144900006| SUB 14Y14/15 COMMAND POST CPIR MY15 XCP ACTNATION BARREL 5.700 SILVER| Knarp for dropper-post cable
Seatpost Dropper Lever| Tero| 5104200069| SUB REMOTE LEVER SPL-SRL-MY17-BK-OE 14Y17 CP SRL LE| Lever for dropper-post
Seatpost Shim| Como| 5174900001| SIP SEATPOST SHIM 34.900 – 30.9ID| 30.9mm to 34.9mm shim for suspension posts on 4.0 and 5.0 models
Sliding Dropout Bolts| Vado / Como| 5216000003| DRO MY22 VADO/IERO DROPOUT SLIDER HARDWARE KIT| Bolts & washers for slider dropouts-IGH models
Sliding Dropout 05| Vado / Com| 5216000004| DRO MY22 VADO/IERO DROPOUT SLIDER, DRIVESIDE, VV/ HARDWARE| DS Slider dropouts-IGH models
Sliding Dropout NOS| Vado / Corn| 5216000005| DRO MY22 VADO/IERO DROPOUT SLIDER, NON DRWESIDE. W/ HARDWARE| NDS Slider dropouts-IGH models
Speed Sensor Cable| Vado / Como! Tem| 5216800025| ELE LEVO FSR SPEED SENSOR CABLE| Speed sensor cable, all models (shared part with G2 & 63 Leval
Speed Sensor Holder| Vado / Como! Tem| 5216800038| Ell MY22 VADOITERO SPEED SENSOR HOLDER| Speed sensor holder with bolt
Speed Sensor Magnet 6-Bolt| Veda / Carol Tem| 5194200016| SUB 14Y19 LEVO FSR SPEEDSENSOR-MAGNET KIT| 6-bolt speed sensor magnet for Rear Derailleur equipped models
Speed Sensor Magnet 6-Bolt| Vado / Comol Tem| S2I6800039| ELE MY22 VADOITERO SPEED SENSOR MAGNET, 6BOLT| 6-bolt speed sensor magnet for IGH rear hubs
Speed Sensor Magnet Center tock| Vado/ Comol Tero| 5199900012| MX SPEED SENSOR MAG HOLDER.CENTERLOCK,ASSY.LOCK RING| Centerlock speed sensor magnet – for non IGH models
Spider [‘CHI| Vado / Como| 5211600026| CRK MY22 VADO PRAXIS SPIDER, 11148CO. VERSION C, IGH| IGH equipped models
Spider (Non MITT| Me / Carol Tem| 5195100001| CRK 14119 LEVO FSR SPIDER.I04BCD,PA TRAIL FSR D2| Rear derailleur equipped models (Non IGH)
Spider Nut| Vatic / Como! Tero| 5166800011| ELE MYI6 LEVO ISIS GROOVE NUT| Spider lock-ring for all models Use with either Park Tool 88t-18 or Shinano TL-UN96
Stem 60 mm| Tero Non UT| 5214800003| SIM SBC-2.3-R6.6061-T6.31.8MM.60EG,5CM435.ZINC FINISH BOLIPIREAD LOCK PATCH.SB. WC 60mm| Non ELI Tem Sizes 5 / M
Stem 70 mm| Tero Non Ea| 5214800004| SIM SEIC-2.3-R6.6061-T6.31.8MM.60EG,SCM435.1INC FINISH BOLIPIREAD LOCK PATCH.SB. WC 70mm| Non Ea Tem Sizes L / XL
Stem Flow Set 60 mm| Vado| 5154800016| SIM MYI5 SIRRUSNIM FLOW-SET STEM 31.820 DEG RISE 60MM BLACK| Vado Sires S /61
Stem Flow Set 75 mm| Vado| 5154800017| SIM 14Y15 SIRRUSMIA FLOW-SET STEM 31920 DEG RISE 75MM BLACK| Vado Sizes L / XL
Stem Stealth 60 mm| Vado 4.0 Tem 4.0 ED| 5194800002| SIM 14Y20 VADO DA-264,31.8MM, L 60MM. 14 DEG| Vado Sires S /14 1 E0 Tero Sizes 5 / M
Stem Stealth 60 mm| Vado 4.0 Tero 4.0 Ell| 5194800003| SIM 14Y20 VADO DA-264,31.8MM, L 75146E14 DEG| Vado Sires 1.1 XL 1 ER Tem Sizes L / XL
Thru Axle – Rear| Vado / Como / Tern| 5170200003| AXL THROUGH AXLE. JO 1D- OR43, 7075-1T3 AXLE W/C680I WASHER. REAR, 148MM SPACING, 172MM LENGTH, I2MM| Non-IGH models
Wheel Front (SRAM)| Vado / Carol Tem| 5215500024| WEIL TURBO, 6508. FRONT, ALLOY, TA,15X110MM, DISC. 6-BOLT, 32H| Front wheel for Sram fork equipped models
Wheel Front ISuntour1| Veda / Como! Tem| 5215500023| WHL TURBO, 6508, FRONT, ALLOY, IA, 15XIOOMM, DISC, 6-BOLT, 32H| Front wheel for SR Sun tour Fork equipped models
Wheel Rear| Como| 5225500003| WHL TURBO, 6508, REAR. ALLOY, ION 8011-011. 10X135MM. DISC, 6-BOLT, 32H – EVIOLO TR| Enrich) Trekking rear hub – 4.0 IGH Models
Wheel Rear (Enviolo City)| Vado / Carol Tem| 5225500001| WHL TURBO. 6500. REAR. AUOY, IOX13SMM BOLT-ON, DISC. 6-BOLT, 32H – ENVIOLO CT| Rear wheel with Envelop City rear hub – 3.0 IGH Models
Wheel Rear Ifni° lo HOT| Vado I Comol Tem| 5225500002| WHL TURBO. 6508. REAR. ALLOY. IGH BOLT-ON. 10X135MM. DISC, 6-BOLT. 32H – ENVIOLO HD| Rear wheel with Benvolio Heavy Duty rear hub – 5.0 IGH Models
Wheel Rear (Non ‘CHI| Vado / Como / Tero| 5215500022| WHE TURBO. 650B. REAR. ALLOY. TA. 12X148MM. DISC, 6-BOLT, 32H. SHIMANO 11-SPO FHB| Rear wheel for non-IGH models Como 4.0 & 5.0 neigh Models
| | |
---|---|---|---
SEAT COLLAR| 4 mm HEX| 6.| 55
SEATPOST RAIL CLAMP BOLTS| 5 mm HEX| NA| NA
STEM ra STEERER TUBE| 4 mm HE(| 6| 52
STEM ra HANDLEBAR| 4 mm HE(| 6| 52
STEM la STEERER TUBE| 4 mm HEX| 5.| 46
STEM la HANDLEBAR | 4 mm HEX| 5.| 46
STEM TOP CAP BOLT | 5 mm HEX| NA| NA
CRANK BOLTS| 8 mm HEX| 50| 443
CHAINRING BOLTS| 5 mm HEX| 10| 89
WATER BOTTLE CAGE BOLT| 3 mm HEX| 3.| 25
12 mm REAR AXLE| 6 mm HEX| 15| 133
ENVIOLO MLE NUTS | 15 mm WRENCH| 30 – 40| 265 – 354
DERAILLEUR HANGER *| 4 mm HEX| 6.| 55
HEAD TUBE ICR GUIDE SCREW| T10 TORX| 0.8| 7
MOTOR MOUNT NUTS| 13 mm SOCKET WRENCH| 23| 203
MOTOR MOUNTING BOLT| 5 mm HEX| 23| 203
MOTOR COVER CUSTOM NUT| T20 TORX| 1| 9.
REAR DROP OUT COVER BOLT| 2.5 mm HEX| 1| 9.
ADJUSTABLE DROPOUT MOONING BOLTS| T30 TORX| 13| 115
ADJUSTABLE DROPOUT ADJUSTMENT BOLTS| 3 mm HEX| NA| NA
DROPOUT COUPLER BOLTS| T25 TORX| 4| 35
BATTERY LATCH BOLT| 3 mm HEX| 3| 27.
BATTERY (SEAL) MOUNTING BOLTS| T20 TORX| 3.| 29
SPEED SENSOR MOUNTING BOLT| 3 mm HEX| 1| 9
SPEED SENSOR MAGNET BOLTS (6 BOLT VERSION)| T25 TORX| 6.| 55
SPEED SENSOR MAGNET (CENTERLOCK VERSION)| CASSETTE LOCK RING TOOL| 40| 354
REMOTE SET SCREW| 2 mm HEX| 0.8| 7
CHAIN GUARD MOUNT BOLT (18MOTOR/CHAINSTAY)| 3 mm HEX| 5.| 40
CHAIN GUARD BOLTS| 3 mm HEX| 3| 27.
KICKSTAND BOLTS (IGHI| T30 Torx| 9| 80
KICKSTAND BOLTS (NON IGHI| 5 mm HEX| 9| 80
FRONT FENDER MOUNT BOLTS| 4 mm HEX| 4| 35
REAR FENDER BOLTS| 4 mm HEX| 4| 35
REAR RACK BOLTS| 5 mm HEX| 9| 80

BRAKE ROTOR

| Max| Min| Info
---|---|---|---
Brake rotor rear| 220 mm| 180 mm| Post mount standard

CHAINRING

| Max| Min| Info
---|---|---|---
Chainring| 34 T| 32 T| 36 T can be used without the chain guide

SEATPOST

References

• Made for riders, by riders.
• Product/Parts Finder ASC - (170525)
• Service Part Info ASC - (S154800016)
• Service Part Info ASC - (S154800017)
• Service Part Info ASC - (S166800011)
• Service Part Info ASC - (S172600003)
• Service Part Info ASC - (S174900001)
• Service Part Info ASC - (S175300006)
• Service Part Info ASC - (S179900045)
• Service Part Info ASC - (S184700003)
• Service Part Info ASC - (S194800003)
• Service Part Info ASC - (S195100001)
• Service Part Info ASC - (S199900012)
• Service Part Info ASC - (S204800004)
• Service Part Info ASC - (S210500017)
• Service Part Info ASC - (S211200008)
• Service Part Info ASC - (S211200010)
• Service Part Info ASC - (S211400003)
• Service Part Info ASC - (S211400004)
• Service Part Info ASC - (S211400005)
• Service Part Info ASC - (S211600026)
• Service Part Info ASC - (S211600027)
• Service Part Info ASC - (S211600028)
• Service Part Info ASC - (S211700001)
• Service Part Info ASC - (S211700002)
• Service Part Info ASC - (S211700003)
• Service Part Info ASC - (S212200005)
• Service Part Info ASC - (S212200006)
• Service Part Info ASC - (S212200007)
• Service Part Info ASC - (S212200008)
• Service Part Info ASC - (S212200009)
• Service Part Info ASC - (S212200010)
• Service Part Info ASC - (S212500002)
• Service Part Info ASC - (S212500020)
• Service Part Info ASC - (S212500021)

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>