Tribesigns HOGA-RY0058 Computer Desk with Hutch Instruction Manual
- June 1, 2024
- Tribesigns
Table of Contents
LITTLE TREE
Assembly Instructions
Model No. HOGA-RY0058
Console Table
HOGA-RY0058 Computer Desk with Hutch
Call us!
We’re here to help!
If you have any issues with this product, please contact our customer
service team before returning It.
support@tribesigns.com
1-424-220-6888
We want you to be completely satisfied with your purchase! If anything is missing, damaged, incorrect, or not what you expected, don’t worry. Please keep the outer packaging and take photos of both the packaging and products, and then reach out to us at support@tribesigns.com or call us at 1-424-220-6888. We’ll take care of everything and send you a free replacement, so you can enjoy your purchase as soon as possible without any hassle.
Assembly Instructions:
- Carefully read these instructions and keep them for future reference.
- Refer to the parts list for guidance and ensure that you have all the pieces before starting the assembly process, if anything is missing, damaged, incorrect, contact us FIRSTLY BEFORE assembling.
- When assembling, place all parts on a soft, clean, and flat surface, such as a carpet, to prevent any scratches.
- To avoid misalignment of the holes, Please don’t full tighten the screws until you ensure all parts in place.
Follow Tribesign:
|
---|---
https://www.facebook.com/Tribesigns| https://twitter.com/Tribesigns
|
https://www.pinterest.com/tribesignsOfficial|
https://www.youtube.com/channel/UCdSxto_YQL1SJlxZhHhLepA
https://www.instagram.com/tribesigns/
When using the electric screwdriver, Reduce the power and torque to avoid damaging the furniture
(Install tip-over restraint provided)
Use of tip-over restraints may only reduce but not eliminate, the risk of tip-
over.
Caution
Make sure all parts are included. Most board parts are labeled or stamped
on the raw edge.
Contact us for free replacement if having damaged or missing parts.
Parts & Hardeare List
Hardware List
| A | X56+1 | B | X40+1 | C | X16+1 | D | X34+1 | E | X4+1 | F | X1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| | 
|
φ6X35mm| φ15X12mm| φ15X10mm| φ8X30mm| φ7X47mm| M4X55mm
G| X4| H| X2+1| I| X2+1| J| X2| K| X2| L| X4
---|---|---|---|---|---|---|---|---|---|---|---
| | | | |
M6XO32mm| 3.5X14mm| 4X35mm| (03X4Omm| 155X20mm| p20mm
Installation of Cams and Pins
Screw the pin into the hole. To set the cams correctly, ensure that the arrow on the cam is opening to the hole of the pin it is locking. Lock the cam by turning the cam head with a screwdriver until it is tightened. Please do not use an electric screwdriver to assemble the unit.
Read each step carefully before starting. It is very important that each step of instruction is performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur.
No heartburn, when we handle the return
Our way
| support@tribesigns.com
---|---
| Replacement/Refund
| You
Their way
| Re-package item
---|---
| Schedule pick-up
| Track package
| Replacement
| You
Contact our customer service team
support@tribesigns.com
www.tribesigns.com
1-424-220-6888