Tribesigns P-01 Coffee Table Instruction Manual
- June 1, 2024
- Tribesigns
Table of Contents
Tribesigns P-01 Coffee Table
Product Information
Specifications:
- Brand: Tribesigns
- Model: P-01
- Parts Included: 1 light strip, hardware list (parts 2-7)
Product Usage Instructions
Assembly Instructions:
- Ensure all parts are included.
- Check for labels or stamps on the raw edge of most board parts.
- Contact customer service for free replacement if any parts are damaged or missing.
Steps to Assemble:
- Identify and lay out all components.
- Follow the assembly diagram provided in the manual.
- Assemble the parts in the numerical order as indicated (1-7).
- Make sure to secure all connections properly.
Troubleshooting Tips:
- If facing difficulties during assembly, refer to the labeled parts and hardware list.
- Double-check the orientation of each part before connecting.
FAQ (Frequently Asked Questions)
-
Q: What should I do if a part is missing or damaged?
A: Contact our customer service team at support@tribesigns.com or call 1-424-220-6888 for a free replacement. -
Q: How can I ensure a successful assembly?
A: Follow the provided assembly instructions carefully, lay out all parts before starting, and reach out for assistance if needed.
Assembly Instructions
( Model No. XK00481
Coffee table
Call us!
We’re here to help!
If you have any issues with this product, please contact our customer service
team before returning it.
support@tribesigns.com
1-424-220-6888
We want you to be completely satisfied with your purchase! If anything is
missing, damaged, incorrect, or not what you expected, don’t worry. Please
keep the outer packaging and take photos of both the packaging and products,
and then reach out to us at
support@tribesigns.com or call us at
1-424-220-6888. We’ll take care of
everything and send you a free replacement, so you can enjoy your purchase as
soon as possible without any hassle.
Assembly Instructions
- Carefully read these instructions and keep them for future reference.
- Refer to the parts list for guidance and ensure that you have all the pieces before starting the assembly process, if anything is missing, damaged, incorrect, contact us FIRSTLY BEFORE assembling.
- When assembling, place all parts on a soft, clean, and flat surface, such as a carpet, to prevent any scratches.
- To avoid misalignment of the holes, Please don’t full tighten the screws until you ensure all parts in place.
Follow Tribesign:
Caution
Make sure all parts are included. Most board parts are labeled or stamped on
the raw edge. Contact us for free replacement if having damaged or missing
parts.
Parts & Hardware List
Hardware List
Installation of Cams and Pins
- Screw the pin into the hole. To set the cams correctly, ensure that the arrow on the cam is opening to the hole of the pin it is locking. Lock the cam by turning the cam head with a screwdriver until it is tightened. Please do not use an electric screwdriver to assemble the unit.
- Read each step carefully before starting. It is very important that each step of instruction is performed in the correct order. If these steps are not followed in sequence, assembly difficulties will occur.
No heartburn, when we handle the return
Contact our customer service team
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>