Tribesigns HD-SF0177 Bailey 4-Light Lamp Black Square Iron Lantern Pendant Light Instruction Manual
- October 30, 2023
- Tribesigns
Table of Contents
Tribesigns HD-SF0177 Bailey 4-Light Lamp Black Square Iron Lantern
Pendant Light
Product Information
Assembly Instructions for Chandelier SKU# TH-SF0177
The Chandelier SKU# TH-SF0177 is designed for indoor use and is rated for up to 60-watt maximum TYPE B bulbs or 13-watt compact fluorescent light bulbs or 7-watt LED bulbs. It is safety listed for dry locations and may be dimmed with a standard incandescent dimmer. The product comes with hardware included such as a junction box, single mounting bracket, canopy, canopy screws, shorter post, longer post, washer, lid, metal sheet, post body, socket ring, wires, connector, bulb, lamp holder, and wire nuts.
Product Usage Instructions
- Before starting the installation of the light fixture, turn off the electrical power.
- Supplies required by the local electrical code must be used for wiring.
- This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
- To clean the fixture, turn off the power, wait for it to cool, and wipe the fixture with a clean, soft cloth. Never spray the cleaner directly onto the fixture.
- Inspect the wire insulation for any cuts, abrasions, or exposed copper that may have resulted during shipping. If there is a defect in the wire, do not attempt installation.
- Follow the assembly steps provided in the manual to correctly install the product.
- If there is any problem with the product, refer to the troubleshooting guide provided in the manual.
- CHAND ELIE R SKU # TH-SF0177
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO PERSONS READ ALL INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
SAFETY PRECAUTIONS
- TURN OFF THE ELECTRICAL POWER BEFORE STARTING THE INSTALLATION OF THE LIGHT FIXTURE.
- WIRING SUPPLIES AS REQUIRED BY LOCAL ELECTRICAL CODE.
- THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.
- TO CLEAN THE FIXTURE, TURN OFF THE POWER, WAIT FOR IT TO COOL, AND WIPE THE FIXTURE WITH A CLEAN, SOFT CLOTH. NEVER SPRAY THE CLEANER DIRECTLY ONTO THE FIXTURE.
NOTE: The product may not look exactly as shown in the figures.
CAUTION: Inspect the wire insulation for any cuts, abrasions, or exposed
copper that may have resulted during shipping. If there is a defect in the
wire, do not attempt installation.
- This fixture has been rated for up to 60-watt maximum TYPE B bulbs or 13-watt compact fluorescent light bulbs or 7-watt LED bulbs. To avoid the risk of fire, do not exceed the recommended wattage.
- This product is safety listed for dry locations.
- This product may be dimmed with a standard incandescent dimmer.
Assembly Steps
PARTS
Part Included
Code| Part description| QTY
A| Junction Box| 0
E| Single Mounting Bracket| 1
F| Canopy| 1
G| Canopy Screws| 2
H| Shorter Post| 1
I| Longer Post| 3
J| Washer| 1
K| Lid| 1
M| Metal Sheet| 1
N| Post| 4
O| Body| 1
B| Socket Ring| 0
C| Wires| 3
Q| Long Post| 4
R| Connector| 4
W| Connector| 4
S| Bulb| 4
T| Post| 4
U| Lamp holder| 1
V| Short Post| 4
Hardware included
| D | Wire Nuts | 3 |
|---|---|---|
| L | Screws | 32 |
| P | Long Screws | 2 |
Trouble Shooting
| Problem | Possible Cause | Solution |
|---|
The bulb will not light.
| The power is OFF.| Ensure the power supply is ON.
There is a faulty wire connection.| Check the wiring.
The circuit breaker is OFF.| Ensure the circuit breaker is in the ON position.
The fuse blows or the circuit breaker trips when the light is turned ON.|
There are crossed wires or the power wire is grounding out.| Check the wire
connections. Contact a qualified electrician.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>