ROTHENBERGER ROMAX 4000 Press Ring and Actuator Instruction Manual
- June 1, 2024
- Rothenberger
Table of Contents
Pressring & Zwischenbacke
Press ring & Actuator
rothenberger.com
Instructions for use
RO SERVICE+: + 49 (0) 61 95/ 800
8200
+ 49 (0) 61 95/ 800 7491
service@rothenberger.com –
www.rothenberger.com
Operating
Markings in this document:
| Danger!
This sign warns against the danger of personal injuries.
Injury / Crushing.
---|---
| Danger!
Possible hazard from chipping.
| Caution!
This sign warns against the danger of property damage and damage to the
environment.
Important note: Failure to comply can lead to malfunctions.
| Caution!
Use eye protection.
Failure to comply can result in health damage.
| Caution!
Read and follow the operating manual.
| Caution!
Visual inspection.
Intended use
ROTHENBERGER main jaws (ZBR Standard, Compact) with press rings are
exclusively intended for use with ROTHENBERGER pressing tools as well as with
pressing units with compatible main jaw holders and a constant axial thrust of
32 to 34 kN (ZBR Standard), or 19 to 20 kN (ZBR Compact). Any other use or
uses which go beyond this are not valid for intended use.
ROTHENBERGER will not be liable for any damage resulting from invalid use. The
user will be solely responsible for the risk. Another component part of the
intended use is the reading and following of the Operating Instructions and
the Inspection and Maintenance Conditions.
Operating
The main jaw with press rings may only be operated by qualified specialist
craftsmen from the sanitation/heating/air conditioning area after successful
training.
Inspection: After 10.000 pressings / 12 months.
Maintenance: We recommend that repairs be done only by our authorized
service facilities.
Have your main jaw with press ring checked at the latest 1 year after the
purchase or after 10.000 pressings (according to which occurs first) by an
authorised ROTHENBERGER testing centre, and repeat these checks at the latest
1 year or another 10.000 pressings after the previous inspection. During main
jaw with press ring inspection the main jaws with press ring are checked for
operating and functional safety and wear parts (e.g. springs) are exchanged.
Main jaw with press ring which are functionally and operationally safe are
returned to you.
Caution: The nominal width and the pressing contour of the fitting must
match the nominal width and contour of the press rings. Non-compliance leads
to incorrect compression. Follow the fitting manufacturer’s assembly
instructions.
In case the Press Ring is stuck on the fitting after crimping, release it
smoothly by inserting a flat screwdriver into the Press Ring‘s front slot.
ROTHENBERGER Werkzeuge GmbH
Industriestraße 7
D-65779 Kelkheim / Germany
Telefon +49 6195 / 800 – 0
Telefax +49 6195 / 800 – 3500
info@rothenberger.com **F90299-i4 /1223/F
&E
[ rothenberger.com**](http://rothenberger.com)
Documents / Resources
|
ROTHENBERGER ROMAX 4000 Press Ring and
Actuator
[pdf] Instruction Manual
ROMAX 4000, ROMAX 3000 AC, ROMAX AC ECO, ROMAX Compact TT, ROMAX 4000 Press
Ring and Actuator, Press Ring and Actuator, Ring and Actuator, Actuator
---|---