VENTION Air A01 True Wireless Bluetooth Earbuds User Manual
- June 12, 2024
- VENTION
Table of Contents
True Wireless Bluetooth Earbuds
Air AOT
User Manual | VWS-£29
Specifications
Model: NBM
Bluetooth version: Bluetooth 5.3
Compatible Bluetooth profile: AVRCP/A2DP/HFP/HSP
Supported codec: SBC/AAC
Maximum communication range:≤12 m
Frequency band: 2402MHz-2480MHz
Frequency range: 20Hz-20KHz
Earbuds’ battery capacity: 40mAh/0.148Wh
Earbuds’ input power: 5V 50mA
Charging case’s battery capacity: 320mAh/1.184Wh
Charging case’s input power: 5V 500mA
Charging case’s interface: USB-C Material: ABS
Operating instructions
-
Power on
a. When the charging case opens, the earbuds power on. -
Pairing and connection
1 Earbuds are ready to pair right out of the charging case. Note: If the pairing fails, please check whether the earbuds are fully charged and repeat the operation above.
2 Open the Bluetooth menu on your device. In the list of discovered Bluetooth devices, tap or click your Vention A01. Note: For the first-time pairing, please keep the pairing range within 1 m. After the pairing is successful, the earbud automatically powers off when placed back in the case, and you can use either earbud independently.
-
Power off
• Auto power off
a. The earbuds will automatically power off after 5 minutes of not being connected.
b. When the earbuds are not paired with the phone due to the long distance, it will automatically power off if it is not connected for more than 5 minutes.
• Manual power off
a. Earbuds automatically power off when placed back in the charging case with the lid closed.
b. When it is connected and not playing any content, press and hold the multi- function button for 5 seconds to power off (left or right).
-
Music mode:
Play/Pause: Tap the multi-function button twice quickly (left or right)
Skip backward: Press and hold the multi-function button on the left earbud for 2 seconds
Skip forward: Press and hold the multi-function button on the right earbud for 2 seconds
Decrease the volume: Tap the multi-function button (left)
Increase the volume: Tap the multi-function button (right) -
Phone mode:
Decline the call: Press and hold the multi-function button for 2 seconds (left or right)
Answer a call: Tap the multi-function button twice quickly (left or right)
End a call: Press and hold the multi-function button for 2 seconds (left or right) -
Using the voice assist function
When the phone is on standby or playing music, tap the multi-function button 3 times (left or right)to activate your voice assistant. Tap the multi-function button 3 times (left or right)to stop the mobile device voice control. -
Clear the Earbuds device list
When the earbuds are powered on (and the device’s Bluetooth function is turned off), tap the multi-function button 5 times to clear the Bluetooth devices list.
For more interesting information and events, please follow us on social media platforms:
For warranty service or support, please contact Vention team: Website: www.ventiontech.com Email: vention@ventiontech.com| |
---|---|--- -
Earbuds status lights:
| System state | Light activity |
|---|---|
| Pairing mode | Slowly pulses white and blue. |
| Connection process completed | The indicator turns off. |
| Place the earbuds back | The indicator lights up in white while charging, and |
turns off after charging is complete.
9. Charging case digital display:
**** System state| Display activity
---|---
During charging,
when the lid of the charging case is closed| The digital display remains
illuminate to show the battery level, and the battery bars on the left and
right move vertically like a scrolling animation. Once fully charged, the
display will tum off.
Charging| The digital display remains illuminated to show the battery level,
and the last digit of the battery level flashes.
Charging is complete| The digital display shows100%” for the battery level,
then turns off.
The remaining battery charge of the charging case is less than 20%| During
charging, when the lid of the charging case is opened, the digital display
flashes to show the battery level, and it turns off after 10 seconds.
Important safety instructions
Please read all instructions and warnings before using this product. Inappropriate use will cause damage to the product or personal safety.
- Do not expose products containing batteries to excessive heat (e.g., from storage in direct sunlight, fire, or the like); do not store this product in high temperature, strong light, and strong magnetic field environment, do not place it in other harsh environments such as fire source, If your earbuds ever go into the water, please dry it naturally before using.
- Improper use of the product can easily cause product damage or may endanger personal and property safety.
- If consumers violate the product instructions and use them improperly, the company will not bear any consequences or legal liability for personal and property damage.
- Non-professionals are strictly forbidden to disassemble this product.
- Use this product only with an agency-approved power supply that meets local regulatory requirements. Declaration on toxic or hazardous substances and elements contained in electronic products
Declaration on toxiceor hazardous substances and elements contained in
electronic products
| Toxic or Hazardous Substances or Elements
---|---
Parts name| Lead| Mercury| Cadmium| Hexavalent
chromium| Polybrominated
biphenyls| Polybrominated
diphenyl ethers
| (Pb)| (Hg)| (Cd)| (CM)| (PBB)| (PBDE)
PCBs| X| 0| 0| 0| 0| 0
Ceramic Parts| x| 0| 0| 0| 0| 0
IC Parts| X| 0| 0| 0| 0| 0
Charging Cables| 0| 0| 0| 0| 0| 0
Casing| 0| 0| 0| 0| 0| 0
This table is prepared in accordance with the provisions of SJ/T 11364.
0: Indicates that this toxic or hazardous substance contained in all of the
homogeneous materials for this part is below the limit requirement of GB/T
26572.
X: Indicates that this toxic or hazardous substance contained in at least one
of the homogeneous materials used for this part is above the limit requirement
of GB/T 26572.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1)This device may not cause harmful
interference, and (2)this device must accept any interference received,
including interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2: Any changes or modifications to this unit not expressly approved
by the party responsible for compliance could void the user’s authority to
operate the equipment.
NOTE 3: The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure condition without
restriction.
FCC ID: 2A7Z4-NBM
Contents
NINGBO FULMAN COMMUNICATION TECHNOLOGY CO.,LTO|
---|---
PART NAME| N BM| PART MODEL| VWS-E29
DESIGNER| Melissa| UNIT| mm| Client NO.|
CHECK| | REV| AO| DWG.N O.|
APPR.| | PAGE| 1/1| UPDATE| 2023/08/16
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>