COAST CL40R Clamp Light User Guide
- June 13, 2024
- COAST
Table of Contents
CL40R CLAMP LIGHT
INSTRUCTIONS: COAST CL40R CLAMP LIGHT
CLAMP LIGHT CONSTRUCTION
The CL4OR light body is composed of a COAST-engineered resin with four
protective thermoplastic resin bumpers at each of the Clamp Light’s four
corners. The clamp is made from a heavy-duty aluminum, and its primary
attachment point is coated with a synthetic rubber padding for superior grip
and added protection.
USING THE CLAMP LIGHT
The CLAOR is designed with COAST’s Wide Angle Flood Beam featuring three
brightness settings. Use the Power Button to turn on the CL40R, as well as
cycle through low,
medium, and high settings, in that order.
DIRECTING THE BEAM
The CL40R is mounted to the clamp on a swiveling ball, allowing for full
360-degree rotation of the Clamp Light. To adjust the direction of the beam,
lift the Clamp Light from the stowed position. Swivel the Clamp Light until
the Wide Angle Flood Beam is aimed in the desired direction. While the CL40R
is in the stowed position, the clamp handles also function as a vertical stand
for the Clamp Light.
MOUNTING THE CLAMP LIGHT
The CL40R is equipped with a secure spring clamp for hands-free use. To
mount the Clamp Light to an object using the clamp, grasp the clamp handles
and squeeze them together to open the jaws. The clamp is tensioned by a pair
of powerful steel springs, and it may require both hands to open. Once the
jaws of the clamp are open, place them around a solid object and slowly
release tension on the handles until the jaws have a firm grasp on the object.
The primary contact points on the jaws are fitted with synthetic rubber pads,
which should prevent the marring of most objects the clamp is affixed to.
CHARGING THE BATTERY
The CLA40R is powered by an integrated COAST ZITHION™ Rechargeable Battery.
To charge the battery, lift the port cover and plug the COAST USB-C Charging
Cable (included) into the USB-C Power Input Port. Then plug in the charging
cable at an available power source.
Monitor charging progress, as well as available power of the CL40R using the
Battery Life Indicator, located on the back of the Clamp Light. While the
CL40R is plugged into a power source, one of the four panels on the Battery
Life Indicator will flash green indicating that the battery is actively
charging and the current level of battery life. Each solid green panel on the
Battery Life Indicator represents 25% of the available battery life. Once all
four panels are solid green, the battery is fully charged. When the CL40R
reaches its lowest power limits, the Wide Angle Flood Beam and the final power
panel on the Battery Life Indicator will begin to flash, indicating that the
battery must be charged immediately.
CONTINUOUS RUN
In addition to the ZITHION™ Rechargeable Battery, the CL40R can also be
continuously run using standard AC/ DC power. To continuously run the Clamp
Light, plug the USB-C
Cable (included) into the CL40R and plug the cable into an available power
source, Then turn on the Clamp Light.
While in continuous run, the CL40R Clamp Light will operate at a single
setting at a reduced level.
The Clamp Light will not charge while in continuous run mode. The light must
be turned off and not in use in order to fully charge.
EXTERNAL PORTABLE CHARGING
The CL4OR is equipped with a USB-A Power Output Port and can also function
as a portable power bank for USB devices. To charge a USB device, plug the
device’s charging cable into the USB-A Power Output Port, located on the back
of the Clamp Light. Then plug in the device. While the device is charging, the
Battery Life Indicator on the CL40R will light up and remain illuminated.
Note: The CL40R does not need to be turned on to charge USB devices.
WARRANTY
COAST’s Lifetime Warranty stands firm behind your product, providing you the
assurance that COAST knives, tools, flashlights and headlamps, are warran-tied
against defects in
workmanship for the life of the product as long as the original purchaser owns
the product for a maximum of 100 years. Any problem at all? Just let us
know—we’ll repair or replace your product. Proof of purchase is required to
claim this warranty. Please understand this warranty does not cover normal
wear and tear, nor damage resulting from misuse or neglect. The warranty also
does not cover batteries and charging accessories (or damage caused by
either). Batteries or damage caused by batteries (i.e. leakage) are also not
included in the Warranty. Warranty ex-changes do not cover the cost of
shipping and handling.
Visit www.COASTportland.com/warranty
for more information.
CAUTION
The CL40R is compatible with the integrated COAST ZITHION™ Rechargeable
Battery only. Do not attempt to remove the Rechargeable Battery from the
CL40R.
Never submerge the CL4OR in any liquid.
Do not attach the clamp to objects with risks of arc flash and/ or electric
shock hazards
Note: This Warranty is not valid for items purchased in Mexico. For warranty
information specific to Mexico, please refer to the separate warranty sheet
found in your package or
visit www.coastportland.com/warranty.
1. WIDE ANGLE FLOOD BEAM WITH POLYCARBONATE COVER
2. HIGH IMPACT TPR CORNER PROTECTION
3. PADDED ALUMINUM CLAMP WITH STEEL SPRING CONSTRUCTION
4. 115° BEAM TILT
5. 360° LIGHT ROTATION| 6. POWER BUTTON
7. USB-A POWER OUTPUT
8. USB-C POWER INPUT
9. BATTERY CHARGE INDICATOR
---|---
COAST ZITHION™ RECHARGEABLE BATTERY OR CONTINUOUS RUN
USB-C CHARGING CABLE (INCLUDED)
WIDE ANGLE FLOOD BEAM
WIDE ANGLE FLOOD BEAM
BAJO FAIBLE
WARNING
You must read and understand the following warnings and instructions before
using this product. Failure to follow them could result in serious injury,
including burns, or property damage.
WARNING – HOT SURFACE
Burn Hazard. Do not touch lens or light surface until adequately cooled.
The lens and surrounding light surface achieve high temperatures while the
light is on and even after it is off. Keep at a safe distance from the lens
and surrounding light surface until adequately cooled, which usually does not
occur until at least 5 minutes after the light has been off.
WARNING – KEEP AT SAFE DISTANCE
Burn Hazard. Keep at a Safe Distance (0.1 meters or 0.3 feet) from the lens
and light to avoid hot surface.
The lens and surrounding light surface achieve high temperatures while the
light is on and even after it is off. The lens and surrounding light surface
should not be touched until adequately cooled, which usually does not occur
until at least 5 minutes after the light has been off.
COAST INTERNATIONAL DISTRIBUTORS
EU
Lakuda ApS
Spettrupvej 1
Hedensted 8722
Denmark
[email protected]
SPAIN/FRANCE/PORTUGAL
FEGEMU SB, S.L.
B75009316
C/APOSTOLADO, 34 20014 SAN SEBASTIAN GIPUZKOA (SPAIN)
[email protected]
UK/REPUBLIC OF IRELAND/ BELGIUM/NETHERLANDS/LUXEMBOURG
BBB INVESTMENTS LTD
Unit A3, Harrison Road
Airfield Business Park Market Harborough Leicestershire, LE16 UL United
Kingdom
[email protected]
AUSTRALIA/NEW ZEALAND
White International 60 Ashford Ave Milperra NSW, 2214
[email protected]
MEXICO
RIMARWEN TRADING COMPANY S.A. DE C.V.
Av. Roble #300 Suite 708 Col. Valle Del Campestre San Pedro, Garza Garcia,
Nuevo Léon, Mexico CP: 66265
[email protected]
COASTPORTLAND.COM
QUESTIONS?
PREGUNTAS? / DES QUESTIONS
877-706-4545