nordlux ALTON 23 Black Pendant Light Instruction Manual
- June 1, 2024
- nordlux
Table of Contents
nordlux ALTON 23 Black Pendant Light
Specifications:
- Product Name: Silica gel gasket
- Bulb not included
- Model Number: $/721
- IP Rating: IP20
- Maximum Wattage: 0W
Product Usage Instructions
-
Installation Guidelines:
Ensure the product is installed in a location where it will not come into contact with water. Follow the specific installation instructions provided for your region as indicated by the IP rating codes. -
Electrical Safety:
Before installation, make sure to disconnect the power source to prevent any electrical hazards. If in doubt, consult a qualified electrician for assistance. -
Maintenance:
Regularly check the condition of the gasket and ensure it is free from damage. Replace the gasket if any signs of wear or tear are observed to maintain the product’s effectiveness.
Frequently Asked Questions (FAQ):
-
Q: Is the bulb included with the product?
A: No, the bulb is not included. You will need to purchase a compatible bulb separately. -
Q: What does the IP20 rating mean?
A: The IP20 rating indicates that the product is protected against solid objects larger than 12.5mm and does not have protection against water ingress. -
Q: Can this product be used outdoors?
A: No, this product is recommended for indoor use only due to its IP20 rating which does not provide protection against water exposure.
Mounting instruction
Instructions
-
IP20: The lamp should only be installed in areas where direct contact with water cannot occur.
-
Class I: The lamp has an earth terminal and must be connected to the yellow/green earth wire.
-
Z-connection: the wire cannot be replaced if damaged, and the lamp must be discarded.
-
Do not exceed the maximum wattage.
-
The mounting instruction must not be discarded.
-
Disposal of waste equipment by users in private households in the European Union. This symbol indicates that this product must not be disposed of with your other household waste. Electrical and electronic equipment contain substances which may cause damage to human health and environment if not recycled correctly. It is your responsibility to hand over to a designated collection point for recycling of waste electrical and electronic equipment. When handing over for correct recycling you help to prevent these products straining nature and environment unnecessarily and to protect human health. For more information regarding correct disposal, please contact your local city
purchased this product. -
General maintenance: Use a soft, dry cloth for dusting, and a soft cloth wrung in lukewarm water (<50°C) with a mild detergent to remove grease stains or similar. Never use detergents containing abrasive or solvent. Only switch on the lamp once all the water has evaporated. Specifically for mouth-blown glass: Mouth-blown glass is formed manually. Because of this unique process, air bubbles may occur in the glass, just as the thickness of the glass may vary. This is to be seen as a natural consequence of the manual process, and is what gives Mouth-blown glass its character and organic look.
-
Always clean mouth-blown glass cold.
-
– The lamp is only suitable for connecting directly to the mains.
-
IMPORTANT! Always shut off power to the circuit before starting installation work. In some countries electrical installation work may only be carried out by a authorized electrical contractor. Contact your local electricity authority for advice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>