JOOAN Doorbell Camera Video Doorbell Wireless WiFi Instruction Manual
- June 1, 2024
- JOOAN
Table of Contents
- JOOAN Doorbell Camera Video Doorbell Wireless WiFi
- Product Introduction
- Indicator Flashing Rules:
- Doorbell & Chime Pairing
- Sign up & Login
- Wi-Fi connection
- Explanation of the function
- Working Mode & Set
- Playback Doorbell installation
- Doorbell installation and removal
- How to use the doorbell properly
- FAQ
- After-sale Service & Tech Support
- Specifications:
- FAQ:
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
JOOAN Doorbell Camera Video Doorbell Wireless WiFi
INSTRUCTION MANUAL
Please read the instructions before use
Product Introduction
Indicator Flashing Rules:
1. When the doorbell is pressed, the blue light stays on for two seconds and
then turns off.
2. PIR induction: Blue light repeatedly flashes on and off.
3. Charging: solid red.
4. Fully charged: The blue light is always on, and it will turn off after unplugging.
Doorbell & Chime Pairing
1. Plug the Chime into power outlet
2.Press and hold the 2 keys(Volume key and munic key on the Chime),Holding
them, Then press and hold the doorbell button until hearing the prompt from
the Chime 3.Done
Download cam720 APP from APP store or Google play, or by Scanning the QR code below.
Tips:APP is free,if the APP sotre prompt binding the credit card, pls click ignore at below( the grey button)
Sign up & Login
1. Clik”Register” to enter your Email address
2. Get the verification code from the Email and enter it
3. Set the password for your APP account and remember it.
Tips: Recommend using hotmail,gmail ect., international general Email
Wi-Fi connection
Find the RESET button, press and hold the reset button for 5 seconds to reset the camera until you hear “Di-“, continue to wait for “Di-” 2 times, and the camera will complete the self-test.
NOTE:
1. Only supports 2.4GHz WiFi, pls choose 2.4G WiFi to connect
2 . Take doorbell to near the router
3. Cellphone and doorbell connected to the same WiFi
3. Don’t ban the APP permission avoid to can’t find the doorbell
successfully.
The device connects to the router via WiFi
1. In the APP: Click “+” and select “WiFi Connection”.
2. Tick “Hear Device Prompt Didi”; Click Next.
3. Follow the prompts shown in the app (please connect the WiFi to the JA-**** and return to the Cam720 app).
4. Enter the correct password for your phone’s WiFi connection and click
“Next”.
5. After the device is connected, please wait patiently until the camera
Camera is online.
6. After connection successfully, pls follow the APP guaid to enter “next
step” until the device list, please follow the guide APP to enter the “next
step” until the
device list!
Explanation of the function
1. User Information
2. Add more devices
3. Device name and battery level
4. Cloud storage
5. More settings
6. Start a live video
7. Return to the device list
8. Device sharing
9. More function settings
10. Power information
11. Change Resolution(SD/HD)
12. Enter Full-screen mode
13. Recording screen
14. Take a screenshot to save the picture
15. Talk Button
16. Speaker Button
17. View the playback
18. Quick voice reply
19. Select the working mode
20. ringtone settings & Forced demolition alarm
21. Alarm information push & Sound alarm
22. Working mode & Battery power
23. Switching Camera Networks
24. Camera MAC & ID & Security Setting
Note: The device needs to be in “Live Preview Mode” to make settings.
Working Mode & Set
1. Live monitoring mode
All functions are available in this mode you can view the camera anytime
anywhere.
2.Saving power mode
Most functions can’t be setup,camera will work when it detected the human or
someone press the bell button.
3.Ultra power saving mode
Most functions can’t be setup,camera will work when someone press the bell
button
Note: Change live monitoring mode to other modes freely, but change other working modes to “live monitoring mode”, it needs camera work by pressing the bell button.
Playback Doorbell installation
Select the date and open the desired time node, where you can filter the desired event recordings.
Doorbell installation and removal
Base mounting
Install the Mounting Base vertically on the flat brick wall outside the door
in the direction indicated by the arrow.
Try to avoid mounting on metal materials.
Doorbell installation
Align the doorbell mounting notch with the base fixing slot, and push it horizontally, then slide down about 3mm until you hear a “click” sound to finish install.
Doorbell disassembly
Please turning off the forced disassembly alarm in the APP at first.
Then insert the disassembly pin into the disassembly hole above the doorbell
camera. At the same time, please slide the doorbell up about 3mm and take it
out in parallel.
How to use the doorbell properly
1. Please make sure that the doorbell is within the Wi-Fi signal coverage
range, and select the best location for the signal.
2 . Try to avoid installing on metal materials and partition wall closed areas
to avoid signal interference.
3 . Avoid direct sunlight lens causing abnormal screen display.
4 . When not in use for a long time, fully charge it at least once every 3
months.
5. This product does not support 5GHz Wi-Fi network.
FAQ
Q1:Failed to do WiFi connection?
A 1 : C heck the prompt of the APP,if you have tried 2 times,
message seller or market@qacctv.com with the prompt
screenshot and order number to get the assistance.
Q2: Doorbell is often offline?
A2: (1) Check the Power of the doorbell and WiFi signal range.
(2) if it’s signal issue,pls check the distance away from the router.and the
install place material is the right.
(3) delete the device,reset the doorbell and re-connect it again as the first
time done before.
(4) Message seller or market@qacctv.com to get the assistance.
Q3: Can’t setup?
A3: Pls check the working mode,if it’s not”live monitoring mode”,it needs press the doorbell to let the camera work,then change the working mode to “living monitoring mode” in the APP
After-sale Service & Tech Support
Need some help?
E-mail: technicalreply@qacctv.com market@qacctv.com
for user guides, FAQs, warranty & more.
Scan the QR code below to enter Youtube to view the video demonstration.
Specifications:
-
Dimensions: 78mm x 78mm
-
Product: Jooan Smart Video Doorbell
-
Features: PIR sensor, lens, microphone, disassembly holes,
anti-disassembly, indicator lights -
Connectivity: Wi-Fi (2.4GHz)
-
Power Source: Charging port
FAQ:
Q: What Wi-Fi frequency does the device support?
A: The device only supports 2.4GHz Wi-Fi networks. Make sure to connect to a 2.4GHz network for proper functionality.
Q: How do I reset the camera?
A: Press and hold the RESET button for 5 seconds until you hear audio prompts indicating the reset process is complete.