JOOAN T2R-U Wifi Camera User Manual
- June 2, 2024
- JOOAN
Table of Contents
JOOAN T2R-U Wifi Camera
Camera Introduction
Note: The reset button position will be different for different models, and the picture is for reference only
FAQ
-
Q1 :What should I pay attention to before WiFi connection?
-
A1: APP permission: Pls turn on GPS and all permissions and select”allow”: 1O5 iPhone: pls enable location action by setting> privacy > location services> cam 720 APP>enablepreciselocation, select”always” WiFi requirement: Pls ensure the Name and password ofthe router are not more than 16 characters
Note : pls take the camera near the router for the first connection, cellphone is connected to the same wifi -
Q2 :What should I pay attention to before a Wired connection?
-
A2 :Ethernet cable: pls check the cable is working and check the indicator of the network port is always on NOTE : pls confirm the cellphone is connected to the same wifi of the router that the camera is connected to.
-
Q3: How to do if the camera is often offline?
-
A3 : Adapter: pls check the adapter and outlet for the camera,or check the camera’s record, if there are some broken records, the problem is in power; the camera can record without wifi Network: pls check the network,is it normal APP permission: pls check mobile network permission on the APP is enable, otherwise, the APP can’t work under mobile network. Reconfigure the camera: delete the camera from the APp> add the camera after resetting the camera as the first connection
Sign up & Login
Register an account: Click “Register” > enter your email address, set
your APP passcode, check the verification code, wait for the verification to
be completed and then jump directly to the APP list.
Note: if you don’t want to register an account, it can’t remote, but you
can use stand-alone mode to view the camera. This mode only supports the Local
view.
WiFi connection
Power and Reset the camera: Pls plug in the adapter for the camera, Reset the
camera by long pressing the reset button for 5 seconds until you hear “Di-“,
the camera will do self-inspection after “Di-“2 times Requirement Before WiFi
connection: pls read Q1 above: Don’t ban permissions of the APP
NOTE: some models only support 2.4Ghz WiFi, and cellphones connected to
2.4G WiFi for the first connection; if the camera support 2.4G/5G dual-band
WiFi, pls choose the right WiFi according to the place you want to install
(2.4Ghz signal transfer distances longer, 5Ghz is shorter but faster in
speed).
- In the APP: click”+”> select”WiFi connection”
- Check “configure the network when you hear the device tone” > Tap” next step”
- Follow the Tips Shown in the APP(pls connect WiFi to JA- or JAA-, and then back to Cam720 APP)to find the Camera’s WiFi(namedJA-** / JAA-***),after connected it pls back to cam720 APP
- Enter the right password for the WiFi that your phone is connected to, Tap”Next Step)
- When the device is connected, pls wait patiently until camera is online”, then click the video to view
Wired Connection
Plug the power supply and Ethernet cable into the router: Pls plug the adapter
for the camera, and connect the camera with the Ethernet cable to the router
Reset the camera: Long-press the reset button about 5-8s until you hear
Prompted, and select a wired connection to connect it.
NOTE : pls read Q2 above if there is a problem with the wired connection
if the camera has a Network port, it supports wired/WiFi connection,
otherwise, pls select a Wi-Fi connection to connect.
- In the APP, click”+”> select “network cable connection”
- Search and select the IP of the camera, click to add
- Click the video to view until hearing “camera is online”
- Return to the device list
- Share the device
- More function settings
- Switch image effects
- Turn on the microphone
- Screenshot to save the image
- Swich into a Full-screen image
- Playback (SD card Playback | Cloud Playback)
- Setting of cruise
- Preset point settings
- TZP rotation control
- Turn on voice intercom
- Turn a person a racist.
- Start Live video
- Subscribe Cloud storage
- More functions setup
- User information
- Modify the device name
- Add more cameras
- Back to the device list
- Modify the device name
- Share equipment
- SD card setup
- Detection alarm settings
- Buy cloud storage
- Image Flip: upside down
- Choose a call mode
- Enable/Disable Auto tracking
- Indicator light switch
- Choose night vision mode
- Set the time zone
- Switch WIFI network
- Camera information
- Camera version number
- Delete the camera
- Transfer the camera to another account
Share
Share your camera with your friends and families
- Your friend should have an account of the cam720 APP.
- in the main account, enter the Email of the friend’s APP account or scan the QR code of the account to share it.
- Freely set the permission on this shared account.
Playback
- Turn on the playback function and two recording methods are available: SDcard record(8-128G) and Cloud Record.
- New users can get a trial of cloud storage for free, pls don’t miss it.
- SD card record supports 3 record modes: 24/7 continuous, motion-triggered, and scheduled record.
Installation
Indoor Camera-stent assembly
- This camera can be placed on the desktop, or do ceil or wall-mounted.
- Attach the bracket to the wall and make a mark on the hole to ponch holes, and use a 6mm drill bit to get the holes, then Stuff the rubber stopper into the hole.
- Align the bracket with the hole position and tighten the screws. Fix the body, hold the body and turn it tightly.
Outdoor camera
- Attach the bracket to the wall and make a mark on the hole to ponch holes, and use a 6mm drill bit to get the holes, then Stuff the rubber stopper into the hole.
- Select a suitable location and install expansion screws on the wall. for example, if it’s a wooden wall, expansion screws are not required.
- Align the bracket with the hole position and tighten the screws.
Important Use Notice
- The use of unapproved or incompatible power adapters may cause fire, explosion or other dangers.
- This product and accessories contain some small parts to avoid children’s contact and cause swallowing small parts, causing suffocation or other hazards, in addition, this product is not a toy, so children should be used under adult supervision.
- Please use this product within the appropriate temperature range. When the ambient temperature is too high or too low, it may cause errors, and avoid rain or moisture on the product and its accessories, so as not to affect the use of the product.
- Suitable for equipment, suitable for areas with an altitude of 2000 meters and below.
- WiFi devices should be under a good wifi signal area, pls avoid choosing a closed environment installation which may cause a bad signal.
Important Use Notice
-
Failed in connection at first connection?
Pls view the operation video on the last page(Scan the QR code to view), and pls view wifi connection steps from Page5, if still fails, pls message the seller to get support, we also offer online support if you need it. -
Change a router, camera is offline?
pls delete the camera from the APP, take the camera to near the new router, power and reset it, search and add it. -
Stop record?
1, Check the status of the SD card in the APP 2, Check the recording setup 3, format the SD card 4, change an SD card to test 5, message Seller to get support -
The camera is offline?
Read the Q3 on page and follow it to check, if there are further question, OLS message the seller to get support -
The instructions are not detailed enough?
It’s a general quick user guide, so less many details,pls contact seller to get the E-user manual and operation video according to your order.
FCC STATEMENT
FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to
the following two
conditions:
- this device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected..
- Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20cm between the radiator and your body.
After-sale Service & Tech Support
We offer a one-year warranty and lifetime technical support! As long as there
is any problem, please feel free to contact the purchase store, we will
quickly provide an effective solution. By scanning the QR code below to access
YouTube, Selectthe the right operation video for your camera according to the
APP and Model of the camera Or message the seller to get the operation video
directly.
Operation videos (Scan the QR code to view)
Download CAM720 APP from the APP store or Google Play, or by Scanning the QR code above. Sign up for an account by email and login, please read the instructions carefully before use.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>