CHAINWAY CM710-16 16 Port RFID Module User Manual
- June 1, 2024
- CHAINWAY
Table of Contents
CHAINWAY CM710-16 16 Port RFID Module
Specifications:
- Model: CM710-16
- Product Name: 16-Port RFID Module
- Chip: Impinj E710
- Dimensions: 112.2 x 88.6 x 8.8mm / 4.42 x 3.48 x 0.35in.
- Weight: 253.0 g / 8.92 oz.
- Air Interface Protocol: EPC global Gen2 (ISO18000-6C)
- Working Frequency: 865-868 / 920-925 / 902-928 MHz
- Output Power: 5-30dBm adjustable
- Antenna Interface: 16-channel 50 RF connector SMA Receptacle
- Operating Temperature: -25oC to 65oC
- Storage Temperature: -40oC to 85oC
- Humidity: 10% – 95%
- Reading Range: Up to 10m (with 6dBi antenna, Alien9662 tag)
Product Usage Instructions
Installation:
- Ensure the host UHF RFID reader is powered off before installing the CM710-16 module.
- Connect the 15 PIN FPC Connector of the module to the host reader’s communication interface.
- Apply power within the specified range (DC 3.5-5.25V) to the module.
Configuration:
Configure the module’s output power and working frequency according to your
application requirements using the provided UART communication interface.
Operation:
- After installation and configuration, power on the UHF RFID reader to start using the CM710-16 module.
- Ensure the operating temperature and humidity fall within the specified ranges.
- You can now start reading RFID tags within the designated range.
Maintenance:
Regularly inspect the module for any physical damage or loose connections.
Keep the module clean and free from dust for optimal performance.
Frequently Asked Questions (FAQ):
Q: Can the working frequency of the CM710-16 module be customized?
A: Yes, the working frequency can be custom-designed within the specified
bands of 865-868 MHz, 920-925 MHz, and 902-928 MHz.
Q: What is the maximum read rate of the CM710-16 module?
A: The module can achieve a read rate of 950+ tags per second.
Q: How should I handle RF exposure when using the product?
A: Maintain a distance of at least 20cm between the device and the human
body to comply with RF exposure regulations.
CM710-16
16-Port RFID Module
Chainway CM710-16 is a 16-port RFID module based on Impinj E710 chip that can
be integrated in fixed UHF RFID readers and etc. With high integration level
and superb performance, this module is low in power consumption as well. It is
also resistant to electromagnetic interference and good at heat dispersion.
The module is ideal for industries like warehousing, logistics, apparel,
production lines and such to boost efficiency.
Dimensions
Interface Definition (15 PIN)
Specification
Model
16-Ports RFID Module| CM710-16
Development Board Module| CM-X_EDCB
Physical Characteristics
Dimensions| 112.2 x 88.6 x 8.8mm / 4.42 x 3.48 x 0.35in.
Weight| 7253.0 g / 8.92 oz.
RFID Features
RF Chip| Impinj E710
Air Interface Protocol| EPC global Gen2 (ISO18000-6C)
Working Frequency| 865-868 / 920-925 / 902-928 MHz (
custom-design for frequency band )
Output Power| 5-30dBm adjustable; 1dB step interval;
+/- 1dB precision
Ou tput Power Fl atness| +/- 0.2dB
Antenna Interface
| 16-channel 50Ω RF connector SMA
Receptacle
Regions Supported
| FCC 902-928 MHz; ETSI 865.6-867.6
MHz; China 920-925 MHz; Others for customization (865-868, 902-928 MHz)
Receive Sensitivity| < -86 dBm
Tag RSSI| Supported
Antenna Detector| Supported
Ambient Temp Monitor| Supported
Working Mode| Single/DRM
Communication Interface
Connector| 15 PIN FPC Connector
Host Communication| UART 3.3V TTL Level
Baud Rate: 115200bps
Power Supply
Input Voltage| DC 3.5-5.25V
Power Consumption in RF Output Mode| 7.5W
Power Consumption in Standby (EN high TTL level)| 0.175W
Power Consumption in Power Down (EN low TTL level)|
42.5μW
User Environment
Operating Temp.| -25oC to 65oC
Storage Temp.| -40oC to 85oC
Humidity| 10% – 95%
Reading Performance
Fastest Read Rate| 950+ tags/s
Reading Range
| Up to 10m (with 6dBi antenna, Alien9662
tag)
Notice: Product specifications are subject to change without prior notice. / Model: CM710-16 / Update Date: 2023-03-31
Shenzhen Chainway Information Technology Co., Ltd
Address: 9F, Building2, Phase 2, Gaoxinqi Industrial Park, Liuxian 1st Rd.,
Bao’an District, Shenzhen, Guangdong 518102, China
Tel: 0086-755-23223316 Fax: 0086-755-23223310
Email: sales@chainway.cn
Web: http://www.chainway.net
Do not use the device in the environment at too high or too low
temperature,never expose the device under strong sunshine or too wet
environment.
The suitable temperature for the product and accessories is -25℃~+65℃
RF exposure information: The Maximum Permissible Exposure (MPE) level has
been calculated based on a distance of d=20 cm between the device and the
human body. To maintain compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and human body.
This product can be used across EU member states.
EU Regulatory Conformance
Hereby, Shenzhen Chainway Information Technology Co., Ltd declares that this
device is in compliance with the essential requirements and other relevant
provisions of Directive 2014/53/EU.
The full text of the EU declaration of conformity is available at the
following internet address: https://www.chainway.net
FCC statements
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications or changes to this equipment. Such modifications or changes could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Federal Communication Commission (FCC) Radiation Exposure Statement
When using the product, maintain a distance of 20cm from the body to ensure
compliance with RF exposure requirements.
This device is intended only for OEM integrators under the following conditions:
- The antenna must be installed such that 20 cm is maintained between the antenna and users.
- The transmitter module may not be co-located with any other transmitter or antenna.
As long as the two conditions above are met, additional transmitter testing will not be required. However, the OEM integrator is still responsible for testing their end-product for any additional compliance requirements required for the installed module.
Important Note:
In the event that these conditions cannot be met (for example certain laptop
configurations or co-location with another transmitter), then the Federal
Communications Commission of the U.S. Government (FCC) and the Canadian
Government authorizations are no longer considered valid and the FCC ID and IC
ID cannot be used on the final product. In these circumstances, the OEM
integrator shall be responsible for re-evaluating the end-product (including
the transmitter) and obtaining a separate FCC and IC authorization in the U.S.
and Canada.
OEM Integrators – End Product Labeling Considerations.This transmiter module is authonzed only for use in device where the antenna may be instaled such that 20 cm may be maintained between the antenna andusers. The final end product must be labeled in a visible area with the folowing. “Contains, FCC ID: 2AC6ACM71016 ”.The grantee’s FCC ID can be used onlwhen all FCC compliance requirements are met
OEM Integrators – End Product Manual Provided to the End User:The 0EM inteqrator shal not provide information to the end user regarding how to instal or remoe this RF module in end product user manual. The end usermanual must include all reuired reaulatory information and warninas as outlined in this document.
References
- Chainway | Leading Provider of RFID Readers, Handheld Computers, Rugged Tablet
- Chainway | Leading Provider of RFID Readers, Handheld Computers, Rugged Tablet
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>