eBay 826-2007 Fryer Thermostat Temperature Control Instruction Manual
- June 1, 2024
- ebay
Table of Contents
eBay 826-2007 Fryer Thermostat Temperature Control
Product Information
- Specifications:
- Part Numbers: 200-6107, 809-0396, 819-6009
- Kit Number: 826-2007
- Quantity in Kit: Dial – 1, Spring – 1, Mounting Screw – 1
- Compatibility: Suitable for thermostat dial stability enhancement
Product Usage Instructions
- Ensure the fryer is turned OFF.
- Remove the thermostat dial from the thermostat shaft.
- Remove the top slotted screw securing the thermostat to the mounting plate.
- Install the dial spring over the thermostat shaft as indicated.
- Use the counter-sink screw provided with the spring to secure it in place. Ensure the spring is correctly positioned.
- Reattach the thermostat dial.
- Turn the fryer back ON for operation.
FAQs
Q: Why is it important to ensure the gas valve and thermostat dial are OFF before installing the dial spring?
A: Turning OFF the gas valve and thermostat dial ensures safety during installation and prevents any accidental activation or heating that could lead to injuries or damage.
Q: What should I do if the spring is not staying in place after installation?
A: Double-check the positioning of the spring and ensure it is securely fastened with the provided screw. If issues persist, contact customer support for assistance.
Q: Can the dial spring be used with any type of fryer?
A: The dial spring is designed for specific compatibility with certain fryer models. Refer to the product manual or contact the manufacturer for information on compatibility.
Operating Thermostat
Operating Thermostat Dial-Spring Installation Instructions (Kit 826-2007)
IN KIT 826-2007
Part No.| Quantity| Description
200-6107| 1| Dial Spring
809-0396| 1| Mounting Screw
819-6009| 1| Instructions
Installing a thermostat
Installing a thermostat dial spring increases thermostat dial stability. Before installing the dial spring, ensure the gas valve and thermostat dial are OFF.
To install the dial spring:
- Ensure the fryer is OFF. Remove the thermostat dial from the thermostat shaft. Remove the top slotted screw securing the thermostat to the mounting plate (arrow).
- Install the spring over the thermostat shaft as shown (arrow). Install the counter-sink screw included with the spring. Tighten the screw, ensuring the spring is positioned as illustrated (arrow).
- Replace the thermostat dial. Return the fryer to operation.
819-6009 DEC 03
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>