eBay 1HPLOTG0W Kids Watch User Guide
- May 15, 2024
- ebay
Table of Contents
eBay 1HPLOTG0W Kids Watch
Product Information
Specifications:
- Model: Kids Watch
- Network: 2G
- Features: Phone call capability, registration code generation
Product Usage Instructions
Step 1: Signal and Arrows
Check for both signals and two arrows up and down on the watch display.
Step 2: Network Connection
If the signal and arrows are visible, the watch can make and receive phone calls and connect to the local 2G network to generate the registration code.
Step 3: Weak Signal Troubleshooting
In areas with weak 2G network signals, the watch may not connect to the network. If this happens, move to an open outdoor area and follow the steps below:
- – Ensure you are in an open space.
- – Follow the provided 10 steps for network connection.
- – Retry the connection.
Strong network signals typically establish a connection within 2 to 3 minutes.
However, in weak signal areas, it may take 5 to 10 minutes for the connection
to be established. Please be patient during this process.
Thank you for your cooperation and understanding.
Frequently Asked Questions (FAQ)
Q: Why is my watch not connecting to the network?
A: The watch may have difficulty connecting in areas with weak 2G network
signals. Move to an open outdoor area and retry the connection following the
provided steps.
Quick Start Guide
Ten steps to get “registration code”
- Turn off the watch (important step)
- Inset SIM card correctly (make sure the SIM card supports 2g network)
- Turn on the watch
- Wait 5 to 10 minutes (important step)
- Watch connects network (arrows up and down)
- Go to “Device info”
- Click “Register code”
- Open APP “SeTracker2” and login
- Scan the “registration code”
- Bind the watch with the APP
Troubleshooting
- If you can only see the signal, it means the watch can make and receive phone calls, but there is no network to generate the registration code.
- If you can see both signal and two arrows up and down, it means you can make and receive phone call, the watch can also connect local 2G network to generate the registration code.
- Sometime in some places especially indoors the 2G network is weak, so the watch is not able to connect with network. In this case, please go to a wide open outdoors, follow the above 10 steps and try again.
- When network is strong, normally it only take 2 to 3 minutes.
- When network is not strong, it may take about 5 to 10 minutes, so please be a little bit patient. Thank you very much.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>