SOLAX POWER X1-Hybrid-Fit-G4 ENF Inverter Instructions
- June 1, 2024
- SOLAX POWER
Table of Contents
SOLAX POWER X1-Hybrid-Fit-G4 ENF Inverter
Product Information
Specifications:
- Model: X1-Hybrid/Fit-G4, X3-Hybrid/Fit-G4
- Compatibility: Wireless Bridge
- Firmware: Latest version required for compatibility
- Contact: Global call center – +448081686588
- Email: [email protected]
Product Usage Instructions
Updating Inverter Firmware:
To ensure compatibility with the Wireless Bridge, update the inverter to the
latest firmware version. Follow these steps:
- Locate the USB disk provided in the WB box with the required firmware files for your model.
- Refer to the Firmware upgrading section in your inverter’s user manual for detailed instructions.
- Plug the disk into the upgrade port on your inverter.
- If you have trouble with the manual update process, scan the QR code provided for an instruction video.
For Other Models:
If you have a model other than X1-Hybrid/Fit-G4 or X3-Hybrid/Fit-G4, follow
these steps:
- Connect the inverter to SolaxCloud.
- If unable to connect to the cloud, contact [email protected] for assistance.
- Our global call center at +448081686588 can also provide support for firmware updates.
FAQ:
Q: What should I do if I cannot update the firmware using the USB disk?
A: If you encounter difficulties updating the firmware with the USB disk,
please contact our service team at
[email protected] for further
assistance.
Notice
Please update inverter to latest firmware version to make it compatible with
Wireless Bridge.
The USB disks in the WB box have the required firmware files stored on them
for X1-Hybrid/Fit-G4 and X3-Hybrid/Fit-G4 models. Please refer to the
“Firmware upgrading” section [from contents page] in your inverter’s user
manual. (Please plug the disk into “upgrade port”)
Alternatively, scan the below QR code for an instruction video.
For any other models, please contact our global call center (+448081686588) after connecting the inverter to the SolaxCloud. If you cannot connect the inverter to the cloud, please contact [email protected] and we will provide the appropriate USB