SHARPRO Combination Sharpening Stones User Manual

SHARPRO Combination Sharpening Stones

Product Specifications

• Brand: SHARPRO
• Product Name: Knife Sharpening Stone
• Material: Bamboo, Rubber, Stone
• Stone Grits: #400, #1000, #3000, #8000

Product Usage Instructions

Preparing the Stone

• Submerge the stone in water for 15-20 minutes until all air bubbles escape.

Assembling the Stone

• Place the stone into the rubber base, then secure it within the bamboo base.

Sharpening Process

• Begin sharpening on the coarse #400 side, applying consistent pressure and maintaining an angle. Periodically wet the stone with water.

Finishing Touches

• Repeat the steps on the #1000 side until your knife achieves the desired sharpness. For an extra fine polish, utilize the #3000/#8000 side on your blades.

Cleaning and Drying

• Once sharpening is complete, clean both the stone and the blade.
• Allow them to air dry completely before further use.

Frequently Asked Questions (FAQ):

Q: How often should I sharpen my knives using this stone?

• A: It is recommended to sharpen your knives with this stone as needed, depending on your usage frequency and the dullness of your blades.

Q: Can this sharpening stone be used for serrated knives?

• A: This sharpening stone is best suited for straight-edged knives. It is not recommended for use with serrated knives.

Q: How should I store the sharpening stone when not in use?

• A: Store the sharpening stone in a cool, dry place away from direct sunlight.
• Ensure it is clean and completely dry before storing it to prevent mold or mildew growth.

Usage Instructions

1. Submerge the stone in water for 15-20 minutes until all air bubbles escape.
2. Place the stone into the rubber base, then secure it within the bamboo base.
3. Begin sharpening on the coarse #400 side, applying consistent pressure and maintaining an angle of 10-30°.
4. Avoid scraping off the slurry during sharpening. Keep the stone moist by periodically applying water.
5. Repeat steps 3 and 4 on the #1000 side until your knife achieves the desired sharpness. For an extra fine polish, utilize the #3000/#8000 side on your blades.
6. Once sharpening is complete, clean both the stone and the blade. Allow them to air dry completely before further use.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>