SIEMENS HB13AB521B Stainless Steel Oven Instruction Manual
- June 6, 2024
- SIEMENS
Table of Contents
**SIEMENS HB13AB521B Stainless Steel Oven Instruction Manual
**
Control Panel
Buttons and display
Button|
Use
---|---
Time-setting options| Selects Timer, Cooking time, End time and Clock.
– Minus
+ Plus
| Reduces the settings.
Increases the settings.
Childproof lock| Locks and unlocks the control panel.
Function Selector
Setting Use
|
Use
---|---
Off position| The oven is switched off.
3D hot air| For cakes and pastries on one to three levels. The fan distributes the heat of the ring heating element in the rear wall evenly throughout the cooking compartment.
Circulated air grilling| For roasting meat, poultry and whole fish. The grill element and the fan switch on and off alternately. The fan circulates the hot air around the dish.
Grill, large area
| For grilling steaks, sausages, toast and pieces of fish. The whole area below the grill element becomes hot.
Defrosting| For defrosting, e.g. meat, poultry, bread and cakes. The fan causes the warm air to circulate around the dish.
Oven light| Switches on the oven light
Temperature selector
The temperature selector is used to set the temperature or grill setting.
| Setting Use | Meaning |
|---|---|
| Off position | The oven does not heat up. |
50-270 Temperature Range| The temperature in the cooking compartment in °C.
Grill Setting| The grill settings for “Grill, large area” .
• = setting 1, low
•• = setting 2, medium
••• = setting 3, high
Setting the oven
Use the function selector to set the type of heating
Set the temperature or grill using the temperature selector
The oven will then begin to heat up.
Switching the oven off
Turn the function selector to the off position
Changing the settings
The type of heating and temperature or grill setting can be changed at any time using their respective selectors.
Setting the time-setting options
Your oven has various time-setting options. You can use the button to call up the menu and switch between the individual functions. All the time symbols are lit when you can make settings. The arrow shows you the timesetting option that is active. A time-setting option that has already been set can be changed direction with the + or – button when the arrow is next to the relevant time symbol.
Timer
You can use the timer as a kitchen timer. It runs independently of the oven.
The timer has its own signal. In this way,
you can tell whether it is the timer or a cooking time which has elapsed.
- Press the button once. The time symbols light up in the display and the arrow is next to
- Use the + or – button to set the timer duration.
Default value for + button = 10 minutes
Default value for – button = 5 minutes
After a few seconds, the time setting is adopted. The timer starts. The symbol lights up in the display and the timer duration counts down. The other time symbols go out.
The timer duration has elapsed
A signal sounds 0:00 is shown in the display. Use the button to switch off the
timer.
Changing the timer duration
Use the + or – button to change the timer duration. After a few seconds,
the change is adopted.
Cancelling the timer duration
Use the – button to reset the timer duration to 0:00. The change will be
adopted after a few seconds. The timer is switched off.
Checking the time settings
If several time-setting options are set, the relevant symbols are illuminated on the display. The time-setting options symbol is in the foreground preceded by the arrow.
To call up the timer, cooking time, end time or clock, press the button repeatedly until the arrow is next to the relevant symbol. The display shows the value for a few seconds.
Cooking time
The cooking time for your dish can be set on the oven. When the cooking time
has elapsed, the oven switches itself off automatically. This means that you
do not have to interrupt other work to switch off the oven. The cooking time
cannot be accidentally exceeded.
- Use the function selector to set the type of heating
- Set the temperature or grill setting using the temperature selector
- Press the button twice. 0:00 is shown in the display. The time symbols light up and the arrow is next to
- Use the + or – button to set the cooking time.
Default value for + button = 30 minutes
Default value for – = 10 minutes
The oven will start up after a few seconds. The cooking time counts down in the display and the symbol lights up. The other time symbols go out.
The cooking time has elapsed
A signal sounds. The oven stops heating. 0:00 is shown in the display. Press
the button. You can set a new cooking time using the + or – button. Or
press the button twice and turn the function selector to the off position. The
oven switches off.
Changing the cooking time
Use the + or – button to change the cooking time. After a few seconds,
the change is adopted. If the timer has been set, press the button beforehand.
Cancelling the cooking time
Use the – button to reset the cooking time to 0:00. After a few seconds
the change is adopted. The cooking time is cancelled. If the timer has been
set, press the button beforehand.
End time
You can change the time at which you wish your dish to be ready. The oven
starts automatically and finishes at the desired time. You can, for example,
put your dish in the cooking compartment in the morning and set the cooking
time so that it is ready at lunch time. Ensure that food is not left in the
cooking compartment for too long as it may spoil.
- Adjust the function selector
- Set the temperature selector
- Press the button twice
- Use the + or – button to set the cooking time
- Press the button. The arrow is next to . The time when the dish will be ready is displayed.
- Use the + or – button to set a later end time
After a few seconds, the oven adopts the settings and switches to standby position. The display shows the time at which the dish will be ready and the arrow is next to the symbol.
The and symbols go out. When the oven starts, the cooking time counts down in the display and the arrow is next to the symbol. The symbol goes out.
The cooking time has elapsed
A signal sounds. The oven stops heating. 0:00 is shown in the display. Press
the button. You can set a new cooking time using the + or – button. Or
press the button twice and turn the function selector to the off position. The
oven switches off.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>