GOODSON VSHG-375 Valve Seat Height Gauge Instructions
- June 17, 2024
- GOODSON
Table of Contents
GOODSON VSHG-375 Valve Seat Height Gauge
Product Information
Specifications:
- Model: VSHG-375 Valve Seat Height Gauge
- Adjustable gauge position
- Fully adjustable seat contact probe
- Accommodates seat diameters from 0.750 to 3.000
- Calibrated for .375 Top Pilot
Product Usage Instructions
Preparation:
- Unpack and check for shipping damage.
- Select and install the pilot to fit the guide diameter.
- Slide the tool body over the pilot.
- Adjust the seat contact probe to valve seat face ensuring contact with the fire deck.
Usage Steps:
- Rotate the gauge clockwise and counterclockwise on the pilot.
- Zero (0) the gauge at the minimum reading by rotating the adjustable bezel.
- Check all seats for depth and zero on the deepest point.
- Grind or cut to match the zero depth for uniformity.
FAQ
Q: What diameters can the VSHG-375 Valve Seat Height Gauge accommodate?
A: The gauge can fit seat diameters ranging from 0.750 to 3.000.
Preparation
Unpack and check for shipping damage. Complete unit shown at right.
- Select and install pilot to fit guide diameter.
- Slide tool body over pilot.
- Adjust seat contact probe to valve seat face. Adjust the gauge so it contacts the fire deck
- Rotate the gauge clockwise and counter-clockwise on pilot.
- Zero (0) the gauge at the minimum reading by rotating the adjustable bezel. Check all seats for depth. Zero on the deepest and grind or cut to this depth.
Instructions
- Use to confirm seat to fire deck height
- Helps set the combustion chamber volume
- Adjusts for all popular valve seat diameters
- Gauge is accurate to .001″ (order EDI-1 as replacement)
- Seat contact probe aligns on valve seat while the gauge rides along the fire deck
- Pilot aligns in the valve guide
- Available for .375″ top pilots only
156 Galewski Drive
Winona, MN 55987-0847
Toll-Free 1-800-533-8010
Local 507-452-1830
www.goodson.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>