OTium S01 Bluetooth Sport Headphones User Manual
- June 12, 2024
- Otium
Table of Contents
S01 Bluetooth Sport Headphones
**User Manual
**
Thanks for using our product!
QUICK START GUIDE
Function | Operation |
---|---|
Power On | Long press the MFB for 3 seconds |
Power off | Long press the MFB for 3.5 seconds |
In pairing mode | Long press the MFG for 6.5 seconds |
Answering call | Short press the MFB one time |
End call | Short press the MFG one time |
Reject | Long press the MFB for 1 second |
At the end of the number redial | Double press the MFG one time |
Cancel/End | Short press the MFB One time |
Transfer Audio | Long press the MFB for 1 second |
Mic Mute switch | At the same time press + – |
Pause, play | Short press the MFB |
vol- vol+ 1BACK/FDW) | Short/ Long press vol- vol+ (BACK/FDW) |
The micro USB charging port
- 1-2 hours (full charge)
- Fully charge it before use.
Volume button
- Volume+ I- (Press the button one time, the volume will change for one level)
LED
- During charging, the red light is ON. It turns to blue when it is fully charged.
- When battery is low, the LED flashes in red light 2 times with voice prompt.
Steps to connect the Bluetooth headphones with Cell phone
- In the headphones turned off state,long press the MFB (About 6 seconds),until the headphones Indicator appears red and blue flashing state,entering into the search state(“For pairing state” is heard and the headphones can be serached by other Bluetooth device)
- Turn on the mobile phone Bluetooth,click to search the headphones Bluetooth. Until the mobile has searched the headphones and displays the Bluetooth headphones model No..
- Click the headphones model to connect. After the connection is successful,The headphone’s blue light will flash.
- Password: 0000 if your mobile phone need to enter password.
The connection is successful.
1 for 2 multi-point function connection steps
- When the Bluetooth headphones is on turned off state, Long press the MFB for about 6 seconds, Until the headphones Indicator appears red and blue lights flashing alternatively, entering into the search pairing state.
- Turn on the Bluetooth of mobile phone #1 and search for the Bluetooth headphones name, then click to complete the connection.
- Turn off the mobile phone # 1’s Bluetooth and long press the headphones MFB till the red light on to turn off the Bluetooth headphones.
- Turn on the Bluetooth headphones again enter into searching and paring state.
- Turn on the Bluetooth function of mobile phone # 2, Searching for the Bluetooth device and find the headphones name, click to complete the connection.
- Turn on mobile phone # is Bluetooth function and find the connected Bluetooth headphones before, Click connection to complete 1 for 2.
Keep your Bluetooth headphones to be used around your phone. The straight
without block Bluetooth distance Is about 10 meters between your phone and
Bluetooth headphones. Beyond this distance,Its sound quality may decline and
lose connection.
Learn how to reconnect the headphones:
- Your Bluetooth headphones will try to reconnect the disconnection automatically.
- If your Bluetooth headphones does not try to reconnect, Please press the MFB one time or through your Phone’s Bluetooth menu to reconnect manually.
Restore the factory Settings
- Hold the MFB for about 3 seconds when charging, till the red and blue lights flashing three times to restore factory Settings.
Common problems and solutions
-
Mobile phone can’t search the Bluetooth headphones
Solutions:
• To confirm if the Bluetooth headphones is turned on. (Whether the indicator light is on or Red and Blue light flash alternatively)
• If the Bluetooth headphones is turned on but still can not be esarched, please to restart your mobile phone and the Bluetooth headphones
Notes: A. When the Bluetooth headphones is in pairing mode, to connect in 2 minutes, or the headphones will turn off automatically after 2 minutes.
B. Hold the MFB for about 3 seconds when charging, Till the red and blue lights flashing three times, it can restore factory Settings. -
After connecting the Bluetooth headphones with your mobile phone, there is always disconnection or noise.
Solutions:
• The Bluetooth headphone is power low, please to charge the headphone soon.
• There is block between the Bluetooth headphones and your mobil e phone or it beyond the signal distance. Also, please do not cover the Bluetooth headphones by your hand. To keep signal stable, please keep your phone and the headphones in the same direction. -
The Bluetooth has been connected, but you can’t listen to music.
Solutions:
• Mono Bluetooth headphones can not be used to enjoy music excep tyou match it with Nokia mobile phone.
• Check your Bluetooth setting, to adjust the sound path to hnads-free mode.
• Some cell phones also need to set 2 items for the player: to start the player Bluetooth and choose the just connected Bluetooth device, then click ok.
• Some mobile phones are without complete stereo Bluetooth module and Bluetooth function to listen to music. Please connect your Bluetooth headphones with other mobile phones to check whether the Bluetooth headphones is OK or not! -
Learn how to use Bluetooth headphones to listen music or chat on computer
Answer: If your computer is equipped with Bluetooth, just to open the Bluetooth function and search the opening Bluetooth headphones, or else you need a Bluetooth adapter. By a Bluetooth software (IVT), the adapter can connect theBluetooth headphones with computer. Computers with XP system can identify any Bluetooth adapter automatically and it does not need driver, while the adapter software built-in XP can only transfer files, it can not transmit audio, so you must install the IYT software in CD to transfer audio. -
When Using, the Max distance between Bluetooth headphones and mobile phone or adapter
Answer: The available distance between Bluetooth headphones and mobile phone or adapter is 10M. Generally speaking, the result is the best when there is block between them. When it reaches the distance limit, there is light noise when calling. -
What’s the Bluetooth pairing password?
Answer: The Bluetooth pairing password is 0000, most phones support enter password automatically, only small part phones need to enter password 0000 manually. -
The red light is not on when charging
Possible reason: It is long time not to use the headphones
Solutions:It needs to charge about 30 minutes, then the red light might be bright
Note :Overcharge or keep Bluetooth headphones in a closed car etc. such similar environments, it will reduce the capacity and life of the battery.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>