KOHLER K-37386 Freestanding Heated Bubble Massage Air Bath Owner’s Manual

KOHLER K-37386 Freestanding Heated Bubble Massage Air Bath

Specifications

• Product: 61-3/4 freestanding Heated BubbleMassage™ air bath
• Model: K-2593-GH
• Material: [Material information not provided]
• Technology: BubbleMassage™
• Installation: Freestanding
• Water Capacity: 58 gal (219.6 L)
• Weight: 105 lbs (47.6 kg)
• Water Depth: 15-1/16″ (383 mm)

Product Usage Instructions

Installation
Follow the provided installation instructions for faucet installation and drain location. Ensure proper electrical service is available as per the technical information.

Usage

1. Fill the bath with water to the desired level, ensuring the hot water supply meets the recommended capacity.
2. Turn on the BubbleMassage™ feature and enjoy a warm massage for up to 60 minutes.
3. After use, allow the air channels to dry before draining the bath.

Maintenance
Use recommended drain treatment and tub & shower cleaner for regular maintenance. Refer to the user manual for detailed maintenance guidelines.

FAQ

• Q: Can I install a rim-mount faucet on this air bath?
  A: Yes, you can install a rim-mount faucet, ensuring there is no interference above or below the deck before drilling any holes.

• Q: What are the electrical requirements for this product?
  A: The blower requires 120 V, 15 A, 60 Hz, and the heater requires 120 V, 15 A, 60 Hz. Two dedicated circuits protected with a Ground Fault Circuit- Interrupter (GFCI) are required for installation.

• Q: What is the recommended water depth for optimal performance?
  A: The water depth should be around 15-1/16″ (383 mm) for an ideal bathing experience.

Archer® 61-3/4″ freestanding Heated BubbleMassage™ air bath K-2593-GH

Features

• 118 to 122 airjets release thousands of heated bubbles that surround and support the body in a warm massage
• Automatic and manual purge cycles remove residual water from air channels after use
• Variable-speed blower lets you adjust massage intensity to 18 levels
• Freestanding design creates a striking focal point in your bathing area
• Integral lumbar support
• Slotted overflow allows for deep soaking
•  Coordinates with other products in the Archer collection
• Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath
• Automatic and manual purge cycles remove residual water from air channels after use

Material
Acrylic

Technology

• Auto-shutoff timer on blower allows users to enjoy Heated BubbleMassage™ experience for 60 minutes before turning off
• User interface: electronic keypad control

Installation

• Reversible drain
• Freestanding
• End ledge allows for deck-mounting capabilities for faucets
• PureFlo drains are not recommended for a deck-mount faucet installation

Required Products/Accessories

• K-7271 Brass Slotted Overflow Bath Drain
• or
• K-7272 PVC Slotted Overflow Bath Drain

Recommended Products/Accessories

• K-23726 Drain treatment
• K-23732 Tub & shower cleaner
• K-31797 Slotted overflow bath drain kit
• K-31795 Slotted overflow above-the-floor bath drain kit

Codes/Standards

• ASME A112.19.7/CSA B45.10
• CSA B45.5/IAPMO Z124
• ASTM E162
• ASTM E662
• UL 1795
• CSA C22.2 No. 218.2
• IAPMO Certification
• cUL Listed
• UL Listed
• KOHLER® Plastic Baths and Shower Bases Lifetime Limited WarrantyKOHLER® Hydrotherapy Components Five-Year Limited Warranty
• See website for detailed warranty information.

No change in measurements if connected with drain illustrated. (K-37386)

Required Electrical Service

Two dedicated circuits required, protected with Class A Ground-Fault Circuit- Interrupter (GFCI). Outside North America, this device may be known as a Residual Current Device (RCD).

• Blower: 120 V, 15 A, 60 Hz
• Heater: 120 V, 15 A, 60 Hz

Technical Information

• All product dimensions are nominal.
• Drain location: Reversible
• Basin area, bottom: 45-1/8″ x 19-11/16″ (1146 mm x 500 mm)
• Basin area, top: 52-3/4″ x 25-5/16″ (1340 mm x 643 mm)
• Weight: 105 lbs (47.6 kg)
• Minimum floor load: 43.8 lbs/ft² (213.9 kg/m²)
• Water depth: 15-1/16″ (383 mm)
• Water capacity: 58 gal (219.6 L)
• Template: Footprint, 1265460, not required, not included
• Electrical component rating:
• Blower: 120 V, 10 A, 60 Hz
• Heater: 120 V, 5 A, 60 Hz

Notes

• Measure your actual product for rough-in details.
• Install this product according to the installation instructions.
• The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary.
• This bath is designed for freestanding installation only.

If installing a rim-mount faucet, make sure there is no interference above or below the deck before drilling any holes

1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com USA or www.kohler.ca Canada 2-28-2024 20:12 – US

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>