POTTMACEE P2 Laptop Screen Extender User Guide
- June 1, 2024
- POTTMACEE
Table of Contents
USER’S GUIDE
P2 Laptop Screen Extender
Warm tip:
- Please ensure type-c data wire is connected well with device interface;
- This product supports whole function of type-c (charging and video), integrated one line. If screen cannot be powered on or restarted, please supply external power of 5V, 2A.
Windows Mac Android
Product Introduction
This product is a plug-and-play, muttifunctional external ports, portable and
foldable, dual screen laptop monitor, which can rapidly establish personal
mobile workshop. It provides users with a perfect resolution of multi-screen
display (synchronized or separated) and improves your work efficiency by up
1050% and realizes high efficient multi-task. It supports multi-screen display
with Samsung, Huawe and some other smart phones, and compatible with their
computer mode and audio and video transmission
etc.
Outrigger of this product is designed to use easly. Clamp it onto the top of
laptop and it wil never if all off. It fits laptop with a range of 13 Inches
to17.3inches, providing different fun of experience for white collars,
players, stock traders, entrepreneurs, programmers and students.
Each screen of this product can be independently adiusted brightness, sound,
cortrast and some other parameters. It is equipped with USB/HDMitype-c port,
and can cany out multi-function video and data expansion without docking
station,and can realize integrated one line. display if TYPE-C laptop is a
signal and power supply in one. Desk-top/laptop/mini PG/set top box/game
console or the other devices with a HDMI port can be directly connected to
display, but the screen needs to be turned on by an external
power source (the charging wire of a type-c mobile phone could be applied)
Finall, the single screen of splitter can provide a full 202 degree rotation,
so you can choose your best perspective and give you the best visuaexperience.
Product Attributes
Weight: | 1350g |
---|---|
Screen scale: | 16:9 |
Color fields: | 75% |
Size: | 315X215X39mm |
Refresh rate: | 60Hz |
Resolution: | 1920 X 1080 P |
Speaker: | 4 |
Contrast: | 1000:1 |
Screen size: | 10.8 11.6 12 inches |
Panel type: | IPS wide viewing angle |
Average brightness: | 220CD/m2 |
TYPE-C input: | 5V-20V / 5A MAX |
TYPE-C output: | 5V-20V / 4.25A MAX |
Port: | TYPE-Cx2 + HDMI + USB 2.0 |
Installation and stowing Mode
Dual screen opening with computer
*Note: sequence of open and close must be performed to avoid damage of device.
Connection Mode
Device integrated one line connection mode
Integrated one-line achieved with two in one of signal and power supply TYPE-C
laptop or mobile phone
Connection mode of external power
Note: desk-lop computer o laptop o mini PC or set top box directly
displays with a HOMI port (ihe screen needs exteral power supply), and
integrated one-line is achieved on TYPE-C ultrabook with signal and power
supply in one.
Audio Settings
-
Switch settings of Windows 10 computer end output
1. Right click the loudspeaker icon down-right -
Select “switch on sound * in pop-up dialog box
-
Left click “turm on sound settings” and pop-up the box as provided Here users can set about sound;
Here users can sct about sound
- Master volume ;
- Select output device: (1-speaker-R/speaker/2-speaker-L);
- Device attributes.
Sound
output Some apps can be set (o use a different sound device than the one
selected here.
Please customize the app volume and device in advanced sound
selection. Settings of MACOS computer end sound
- Switch settings of MAC computer end sound output
- Click computer’s “settings” APP
- Select “sound” in dialog box and pop-up as provided:
Click “output’, users can do settings about sound ; (1.Select output device: (1-speaker-R/speaker/2-speaker-L)
Display Settings
-
Switch settings of Windows 10 computer end video output
1. Right click in the blank area of the computer desktop. In the pop-up dialog box, select display setings” left click “display setings® to pop up the dialog seting box as shown2. As shown in above diagram, users can do settings in ‘rearranged monitors’
3.Users can do settings on “brightness and color”4. Do settings on “zoom and layout”, “resolution”,” display direction” and “multi monitor settings” -
Switch settings of MACOS computer end video output
1. Swilch settings of MAC computer end audio output
2. Click “settings” APP 3. Select “monitor” in pop-up box as shown, users can do settings on display output, rotate, refresh rate and brightness.4. Click “arrange” in the display setiing menu to pop up the display box as shown where the user can set the arrangement mode / image of the expanded sreen. -
MacOS Monterey Display Settings and Configuration
1. Enter the “System Preferences” menu 2. Select “Displays” in the dialog box, and a pop-up box as shown in the figure below will show.
The user can now configure their displays to their liking. (To rearrange displays, drag them to the desired position. To mirror displays, hold Option while dragging them on top of each other, To relocate the menu bar, drag it to a different display).3. In this menu the user is able to adjust the orientation of the device by clicking and dragging the windows to their desired positions. Clicking ‘Display Settings’ will then take you to further options.
Screen Buttons Settings
Keys | Operation | Function |
---|---|---|
POWER Key | 1.Short press “powERS” when in shut down situation; | Screen power |
on: wait for 1.5 seconds and image appears after 3S LOGO is displayed on
screen
2.In situation of power on but no OSD menu: long press POWER for 2 seconds;|
Shut down: screen shuts down and no audio outputs
3.Select cursor in OSD menu interface,short press POWER for 1 second:|
Functions as “Confirm’
4.Long press for 2 seconds in OSD menu;| Functions as “return” key
UP Key| 1.When no OSD menu, short press:| Pop up the shortcut menu of volume
progress bar
2. When OSD menu displays progress, short press| Click to switch up the
current option once or add a parameter with the smallest unit
3.VVhen OSD menu displays progress, long press.| Short cut adjust parameters
or options
4. When in OSD menu interface, short press;| Move cursor up
DOWN Key| 1.When no OSD menu displayed, short press;| Pop up short cut key of
brightness progress
2.When OSD menu displays progress short press;| Click to switch up the current
option once or add a parameter with the smallest unit
3.When OSD menu displays progress, long press:| Short cut adjust parameters or
options
4.When in OSD menu interface, short press| Functions as moving down the cursor
Delivery, Storage, and Usage Requirements
In order to ensure the normal use of this product and prevent accidents such
as electric shock or fire, please read and understand all use requirements and
operation procedures before using.
Please strictly abide by the following requirements.
- Please tear off the protective film on the screen surface before use;
- The DC power supply required by this product is AC / DC power adapter, which should be far away from heat source and placed in a well ventiated place. The AC power socket and AC power line should be well grounded and can withstand enough current demand.
- Attention should be paid to avoid excessive humidity and dust, so as to avoid circuit corrosion and failure;
- The DC power input required by this product is 5v-20v + 2V
- Screen surface should not be challenged by extemal force;
- Do not use sharp tools o touch the screen surface;
- This product fits general business and domestic use, and ambient temperature ranging from -20~60°C is recommended;
- Please power off power source when stop using device.
* This manual is applicable to 108-inch product, 11.6-inch product and 12-inch product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>