kinderfeets AX1 Toddler Baby Chair Swing Set User Manual

June 15, 2024
Kinderfeets

kinderfeets AX1 Toddler Baby Chair Swing Set

kinderfeets-AX1-Toddler-Baby-Chair-Swing-Set-product-
image

Product Information

The Kinderfeets Baby Swing brings little imaginations to life, encourages early physical development, and strengthens parent-child connection. It includes a removable seat cushion for comfort and easy cleaning. The swing is crafted using responsibly sourced birchwood, beechwood, and natural rope and finished with non-toxic water-based lacquer. The swing is stable and child- safe with wooden rope locks, nylon hanging straps, and carabiners.

Specifications

  • Material: Birchwood, Beechwood, Natural Rope
  • Finish: Non-toxic water-based lacquer
  • Usage: For home use only
  • Age Range: Suitable for children under adult supervision

Product Usage Instructions

Precautions
Before using your Kinderfeets Baby Swing, please check that it is undamaged, assembled correctly, and that all screws and parts are securely fastened. Regularly check for signs of wear, cracking, damages, or defects. Do not use the swing on hills, cliffs, ledges, busy streets, near open flames or sources of intense heat. Avoid using in adverse weather conditions such as wet weather, wind, or extreme temperatures. Store indoors when not in use.

Assembly

  1. Remove all packaging and ensure all required parts are included.
  2. Using Bolts (E) and Screws (F), loosely attach the swing’s Sides (A, B), Seat (C), and Back Rest (D) according to the diagram.
  3. Tighten all bolts and screws with Allen Wrench (G).
  4. Place Cushion (H) on Seat (C) and adjust the swing’s Rope Locks to achieve the desired height.

Adjusting the Height of the Swing

  • The top 2 wooden Rope Locks are used for adjusting the height.
  • Adjust both to the same height to ensure symmetry. Be sure the swing is hung high enough so your child can swing freely.

To raise the swing (fig.1):
Move the Rope Lock A DOWN the rope by pulling the rope through from hole A to hole B until the desired height is reached.

To lower the swing (fig. 2):
Move the Rope Lock UP A the rope by pulling the rope through from hole B to hole A until the desired height is reached.

FAQ

  • Q: Can the Kinderfeets Baby Swing be used outdoors?
    A: The Kinderfeets Baby Swing is designed for home use only. It is not recommended for outdoor use.

  • Q: How should I clean the Kinderfeets Baby Swing?
    A: Clean your Kinderfeets Baby Swing using a mild cleaning agent, clean water, and a soft cloth.

  • Q: Where should I store the Kinderfeets Baby Swing?
    A: Always store your Kinderfeets Baby Swing indoors in a cool, dry, and well- ventilated location. Avoid storing it in areas with high humidity or where water condensation can build up overnight.

Kinderfeets® Baby Swing

User Manual for the Kinderfeets® Baby Swing
Please read the entire manual before using your Kinderfeets toy.

Thank you very much!

  • The Kinderfeets Baby Swing brings little imaginations to life, encourages early physical development, and strengthens parent-child connection.
  • The Baby Swing includes a removable seat cushion for comfort and easy cleaning. Wooden rope locks, nylon hanging straps, and carabiners ensure the swing is stable and child-safe. Each swing is crafted using responsibly-sourced birchwood, beechwood and natural rope and finished with nontoxic water-based lacquer.
  • Note: The Kinderfeets Baby Swing is for home use only and should always be used under adult supervision. Do not use it on hills, cliffs, ledges, busy streets, near open flames or sources of intense heat. Avoid using in adverse weather conditions such as wet weather, wind, or extreme temperatures. Store indoors when not in use.
  • WARNING! Must be assembled and installed by an adult.
  • Children must be supervised at all times by an adult while using this product.

Use safely!

  • Please read these instructions before using your Kinderfeets toy. This is a hanging and swinging toy that should be used with care at all times to avoid injury. We do not accept any responsibility for possible accidents or damage due to failure to follow the safety guidelines in this manual.
  • This swing is designed to hold one child at a time. Do not let additional children climb or swing while another is present.
  • Recommended for children ages 6 months to 36 months. Common sense should be used to assess a child’s size and ability to use this toy safely.
  • Designed to support child weight up to 36 kg (80 lb).
  • Must always be used under adult supervision.
  • Avoid fast speeds and sideway swinging. Swing is only meant for back-and-forth motion.
  • Always inspect the swing before use to check safety and stability.
  • Frequently inspect all parts of the swing—particularly rope locks, straps and hanging material for signs of wear, cracking, damage, or defects.
  • If a safety risk is identified in a rope lock, strap, or hanging material, remove and replace immediately.
  • Keep packaging away from children to avoid injury or suffocation.

Outdoor use

  • The swing must always be placed under shelter, properly protected from rain, fire, heat, or direct sunlight.
  • Always store indoors when not in use.
  • Sun and moisture will cause changes in materials, which may appear as fractures or slight changes in color or shape.

Precautions:

  • Before using your Kinderfeets toy, please check that it is undamaged, assembled correctly and that all screws and parts are securely fastened. Check it regularly for signs of wear, cracking, damages or defects. A damaged toy should no longer be used.
  • Clean your Kinderfeets toy using a mild cleaning agent, clean water and soft cloth.
  • Always store your Kinderfeets toy indoors in a cool, dry, and well-ventilated location—especially in a tropical or subtropical climate, or any location subject to high humidity and/or high rainfall. Do not store it in a location where water condensation can build up overnight (such as in a shed or on a balcony outside); or in an area with high humidity (such as a bathroom or laundry room with a condensation dryer).

Assembling your Kinderfeets Baby Swing

Remove all packaging. Check to ensure all required parts are included.

  1. Using Bolts (E) and Screws (F), loosely attach the swing’s Sides (A, B), Seat (C), and Back Rest (D) according to the diagram.
  2. Tighten all bolts and screws with Allen Wrench (G).
  3. Place Cushion (H) on Seat (C) and adjust the swing’s Rope Locks to achieve desired height.

Adjusting the height of the swing

  • The top 2 wooden Rope Locks are used for adjusting height; adjust both to the same height to ensure symmetry. Be sure the swing is hung high enough so your child can swing freely.
  • To raise the swing (fig.1): Move the Rope Lock DOWN the rope by pulling rope through from hole A to hole B until the desired height is reached.
  • To lower the swing (fig. 2): Move the Rope Lock UP the rope by pulling rope through from hole B to hole  A until the desired height is reached.
  • After each adjustment, always check that the rope’s end is securely tucked underneath the looped rope passing between holes A and B on the rope locks—with a minimum length of 4 cm (1.5 in) extending beyond the looped portion.

Installation guidelines

Adults must install this swing and verify structural integrity prior to allowing children to use it. For safety, Kinderfeets hanging gym toys should not be attached by any other method that is not indicated in this manual.

  • Choose a location with plenty of space for swinging and soft ground underneath. A shock-absorbing padding under the swing is recommended.
  • Please seek professional installation for any hardware such as ceiling hooks or horizontal bars that the swing will be attached to.
  • C If expansion screw ceiling hooks are used, the Carabiners may be attached directly to them instead of the straps.
  • D If horizontal bars are used, the Hanging Straps can be attached around the bar.
  • Test the swing for stability and symmetry before use. Check all rope locks, straps, carabiners, and/or hanging materials.
  • WARNING! Make sure the area used for hanging is stable and able to support the weight of a child in motion.
  • Test the load bearing capacity of the supporting structure by applying a downward force exceeding the product’s weight limit (36 kg / 80 lb) for an extended period. Carefully check that testing has not damaged or weakened the integrity of the supporting structure.

kinderfeets-AX1-Toddler-Baby-Chair-Swing-Set-01 \(1\)kinderfeets-AX1-Toddler-Baby-Chair-Swing-Set-01
\(2\)

Limited warranty

  • Kinderfeets guarantees that its products will be free from manufacturing defects for one year from the date of purchase. You must submit an ORIGINAL copy of the proof of purchase for repairs or exchanges. This warranty and Kinderfeets’s obligations are restricted to the repair or replacement of products with certified defects occurring within the warranty period. This warranty does not apply to damages caused by weather (including but not limited to wind, rain, dew, or water condensation), improper use, accidents, improper storage (including storage in high humidity areas), and normal wear and tear caused by normal use.
  • Kinderfeets is not liable for accidents or subsequent damages resulting directly or indirectly from the use of its products. The purchaser and user bear all risks associated with using this toy. This includes physical injury and/or death. Adult supervisors are responsible for ensuring that appropriate safety measures are taken. Kinderfeets will not be liable for personal injury or property damage under any circumstances. To use a Kinderfeets product, you must agree with the above guidelines.
  • At Kinderfeets, we do our best to ensure the quality of our products. However, we know no manufacturing process is perfect or defect-free. To report or return a damaged item, please send an e-mail to [email protected] . Please attach a description of the problem and a picture, if possible, as this will help us understand the situation. You will receive further information or a return address so you can send the toy back to us.

If you have any questions, please contact Kinderfeets at:

©2023 Kinderfeets, Inc. All rights reserved. U.S. Patent No. 8,191,931 and patents pending. Rev0523V1

Documents / Resources

| kinderfeets AX1 Toddler Baby Chair Swing Set [pdf] User Manual
AX1 Toddler Baby Chair Swing Set, AX1, Toddler Baby Chair Swing Set, Baby Chair Swing Set, Chair Swing Set, Swing Set, Set
---|---

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Kinderfeets User Manuals

Related Manuals