POTTMACEE S2 14 Triple Portable Monitor for Laptop User Manual

POTTMACEE S2 14 Triple Portable Monitor for Laptop

Product Information

Specifications

• Weight: 1.62 Kg
• Aspect Ratio: 16:9
• Size: 353x207x38.7mm
• Refresh Rate: 60Hz
• Resolution: 1920×1080 P
• Speaker: 2
• Screen Size: 14 Inches IPS Wide Viewing Angle
• Average Brightness: 300CD/M2
• Type-C Input: 5V-20V / 5A Max
• Type-C Output: 5V-20V / 4.25A Max
• Ports: Type-Cx3, HDMI to TYPE-C

Product Usage Instructions

Installation and Stowing Mode

Note: The sequence of opening and closing must be performed to avoid damage to the device.

Outrigger Stretch

1. Crack open the outrigger.

Fixing Mode of Device

1. Adjust the kickstand to a loose position.
2. Place the device on top of the laptop screen and tighten the kickstand to secure it in place.

Opening Mode When It Is Working

1. Follow the opening sequence mentioned above.

Stowing of Dual Screen

1. Fold the top buckle to close the device.
2. When folding the screen, pull the bracket out to the appropriate position and fix the screen in the silicone of the bracket. Forcibly closing it without following this sequence may damage the screen.

Key Definitions

• Menu/Selection/Confirmation Button: Press and hold for 2 seconds to return. Press and hold for 3 seconds to shut down.
• Toggle Left Minus Backlight Adjustment.
• Toggle Right Plus Volume Adjustment.

Connection Mode

To connect the S2 with your laptop, follow these steps:

1. Make sure the type-c data wire is securely connected to the
   device interface.

2. Use the custom HDMI to TYPE-C data cable included in the product packaging to connect the TYPE-C to the DP/HDMI interface of the S2.

Device Power Supply Connection Mode

1. If the screen cannot be powered on or restarted, the supply external power of 5V, 2A.
2. The TYPE-C to DP/HDMI interface used to connect the product must use the custom HDMI TO TYPE-C data cable included in the product packaging and be externally powered.

Audio Settings Change Sound Settings of Windows 10 / Windows 11

To change the sound settings on Windows 10 or Windows 11, follow these steps:

1. Open the sound settings on your laptop.
2. Locate the S2 device and select it as the audio output device.

Change Sound Settings of MAC OS PC

To change the sound settings on a MAC OS PC, follow these steps:

1. Open the sound settings on your MAC OS PC.
2. Locate the S2 device and select it as the audio output device.

Display Mode

To configure the display settings on Windows 10 or Windows 11, follow these steps:

1. Open the display settings on your laptop.
2. Adjust the display resolution, orientation, and other settings according to your preference.

MacOS 13 Ventura Display Settings and Configuration

To configure the display settings on MacOS 13 Ventura, follow these steps:

1. Open the display settings on your MacOS 13 Ventura PC.
2. Adjust the display resolution, orientation, and other settings according to your preference.

Transportation, Storage, and Safety Information

Refer to the user manual for detailed transportation, storage, and safety information.

FAQ

Q: What is the maximum screen size supported by the S2 holder?

• A: The S2 holder can support laptop screens from 13 inches to 17.3 inches.

Q: Can the S2 screen splitter rotate?

• A: Yes, the S2 screen splitter can provide a complete 180-degree rotation on a single screen, allowing you to choose your best viewing angle.

Q: What should I do if the screen cannot be powered on or restarted?

• A: If the screen cannot be powered on or restarted, please supply external power of 5V, 2A.

Q: How should I connect the S2 with my laptop?

• A: To connect the S2 with your laptop, make sure the type-c data wire is securely connected to the device interface. Use the custom HDMI to TYPE-C data cable included in the product packaging to connect the TYPE-C to the DP/HDMI interface of the S2.

Warm tips:

1. Please ensure the type-c data wire is connected well with the device interface.
2. This product supports the whole function of type-c (charging and video), integrated into one line. If the screen cannot be powered on or restarted, please supply external power of 5V, 2A.
3. The TYPE-C to DP/HDMI interface used to connect the product must use the custom HDMI TO TYPE-C data cable included in the product packaging and be externally powered.
   • Windows
   • Mac
   • Android

Product Introduction

• S2 is a multi-function plug-and-play dual-screen laptop monitor that is portable, and foldable, It can help quickly build a personal mobile studio. Provide a perfect solution for laptop users with
  multi-screen synchronous display and multi-screen separate display, which can improve your work efficiency by up to 50% and achieve efficient multi-tasking. It supports the same screen display as some models of Samsung, Huawei, and others. It also supports the computer mode of the smartphone system as well as audio and video transmission, etc.

• The S2 holder is easy to use. Clamp the holder to the top of the computer screen, and it can be easily fixed without falling off. It can support the case of a laptop from 13 inches to 17.3 inches and can be removed and used as a single screen. The screen has support that can be adjusted for different angles, providing different fun experiences for professionals, office workers, gamers, stock traders, entrepreneurs, programmers, and students.

• The S2 screen can independently adjust parameters such as brightness, sound, and contrast. It is equipped with HDMI/Type-C interfaces, allowing for versatile video and data expansion without the need for a docking station. As long as it is a Type-C laptop with combined signal and power capabilities, you can achieve a seamless connection and display. Devices such as desktop computers, laptops, mini PCs, set-top boxes, and gaming consoles with HDMI output interfaces can directly connect to the display.

• However, the screen needs to be powered externally to light up (using the custom HDMI TO TYPE-C cable to connect the product to the computer).

• Finally, the S2 screen splitter can provide a complete 180-degree rotation on a single screen. You can choose your best view angle for the optimum visual experience.

Product Attributes

1. Product host
2. Accessories
3. Parameters

Installation And Stowing Mode

1. Opening mode
   • Note: sequence of opening and closing must be performed to avoid damage to the device
2. Outrigger stretch
3. Fixing the mode of the device
4. Opening Sequence
5. Closing Sequence
   • Note: Please follow the sequence of opening and closing to avoid damage to the device.

Key Definitions

Connection Mode

1. Connect S2 with Laptop
   • TYPE-C Connection: If your laptop has two full-featured Type-C ports, you can connect the S2 directly to your laptop with two Type-C cables.
   • TYPE-C & HDMI & USB-A Connection: If your laptop has one full-featured TYPE-C port, one USB-A port, and one HDMI port, please first connect one monitor using the USB-C cable. Then connect the other monitor using the USB-A to USB-C cable and the HDMI to Type-C cable.
   • Notice: If the display has no signal or the signal is unstable after connection, please connect an external 5V/2A power adapter to power the laptop
2. Connect S2 with Mobile Phone with Other Devices

Audio Settings

Change sound settings of Windows 10 / Windows 11

• Right-click the loudspeaker icon located in the bottom-right corner.
• Select “switch on sound ” in a pop-up dialog box
• Left-click “turn on sound settings” and pop up the box as provided

Here users can set sound

1. Master volume;
2. Select output device: ( S2 / Speaker );
3. Device attributes.

Change sound settings of MAC OS PC

• Choose Apple menu > System Settings
• Click on “Output,” and then choose the desired device from the list of available sound output options.
• output devices：( S2 / Speaker )

Display Mode

1. Windows 10 / Windows 11 Display Settings
   • Right-click a blank area of the desktop. Select ‘Display Settings’ from the pop-up dialogue box.
   • Left-click “Display Settings” to open the settings dialogue box, shown in the figure:
   • Under the “Rearrange displays” section, drag and drop each display to rearrange them according to the physical layout of your desktop. Scroll down to the bottom of the page to further configure the display for extended or mirrored mode.
2. MacOS 13 Ventura Display Settings
   • Enter the “System Preferences” menu
   • Configure your monitor
   • In this menu, you can set the resolution and mirror/extend the display you want.
   • Arrange Displays
   • To rearrange displays, drag them to the desired position.
   • To mirror displays, hold the Option key while dragging them on top of each other.
   • To relocate the menu bar, drag it to a different display.

Transportation, Storage, And Safety Information

To ensure the safe and proper use of this product and prevent accidents such as electric shock or fire, please read and understand all use requirements and operation procedures before using.

Please adhere strictly to the following guidelines:

1. Before use, remove the protective film from the screen surface.
2. This product requires a DC power supply through an AC/DC power adapter. Ensure that the adapter is placed away from heat sources in a well-ventilated location. The AC power socket and AC power line should be adequately grounded to handle the current demands.
3. The DC power input required for this product is 5V-20V ± 2V.
4. Take precautions to prevent excessive humidity and dust accumulation, as they can lead to circuit corrosion and malfunction.
5. Avoid subjecting the screen surface to external forces or impacts.
6. Do not use sharp tools that may damage the screen surface.
7. This product is suitable for general business and domestic use, and it is recommended to operate it within an ambient temperature range of -20°C to 60°C. Please turn off the power when you stop using produce.
8. Remember to power off the device by disconnecting the power source when not in use.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>