Baseus ioTa Series 140W Portable Power Station User Manual

Baseus ioTa Series 140W Portable Power Station

Thank you for purchasing Baseus ioTa Series Portable Power Station (hereinafter referred to as Baseus Digital Portable Power Station). The information contained herein affects your safety and your legal rights and responsibilities. Read this entire document carefully to ensure proper configuration before use. Failure to read and follow the instructions and warnings herein may result in serious injury to you or bystanders, or damage to your device or property. Shenzhen Baseus Technology Co. Ltd. reserves the right of final explanation for this document and all relevant documents relating to Baseus Digital Portable Power Station. and the right to make changes at any time without notice.
By using this product, you hereby signify that you have read this document carefully and that you understand and agree to abide by the terms and conditions herein. You agree that you are solely responsible for your own conduct while using this product, and for any consequences thereof. You agree to use this product only for purposes that are proper and in accordance with all terms, precautions, practices, policies and guidelines Shenzhen Baseus Technology Co. Ltd. (Baseus Digital Portable Power Station) has made and may make available.
Shenzhen Baseus Technology Co. Ltd. (Baseus Digital Portable Power Station) accepts no liability for damage, injury or any legal responsibility incurred directly or indirectly from the use of this product. Users shall observe safe operation guidelines including, but not limited to, those set forth herein.

Function Description

• This product is developed based on industry-leading digital power technology. It supports PD3.1 140W dual-way fast charging, fully charges your device in a snap;

• This product uses a LCD Screen to display real-time operation status (battery level, operating temperature, current input/output power, remaining charging time), charge and discharge reminder, port status, etc.

• It supports correction wave inverted AC output, easily powering up products with rated power less than 140W, such as car mini-fridges, car ice makers, desktop lamps, laptops, cell phones, etc.
  It supports simultaneous power output of up to 6 products, with a maximum of 140W PD fast charging via a single Type-C1 port; it also accommodates multiple protocols for USB/Type-C-based fast power output to meet the charging needs of digital products.

• The TypeCl port supports PD 3.1 output (Max. 140W), fully charges itself in about 2 hours.

• The built-in LED lighting provides three lighting modes: long light, SOS and strobe. You can switch the mode by pressing the button or adjust the brightness of the long light via the app.

Product Specification

• Name: Digital Power Bank 140W
• Model No.: BPE14B
• Battery Capacity: 48000mAh/153.6Wh
• Type-C1 Input: 5V-3A, 9V-3A, 12V-3A, 15V-3A, 20V-5A, 28V-5A 140W Max.
• AC Output: 100V-120V~ 1.28A 60Hz, 140W (Correction wave; Peak Power 280W)
• USB1 Output: 5V-3A, 9V-3A, 1OV-2A, 12V-2.5A
• Type-C1 Output: 5V-3A, 9V-3A, 12V-3A, 15V-3A, 20V-5A, 28V-5A 140W Max.
• Type-C2 Output: 5V-3A, 9V-3A, 12/-2.5A
• Type-Cl+Type-C2 Output: 100W+30w
• USBl+Type-C1 Output: 30W+10OW
• USB1 +Type-C2 Output: 5V-5A
• Type-C1+(Type-C2+USBl) Output: 100W+25W
• DC Output: 13.5V-7.4A 100W Max.
• Total Output: 140W
• Product Size: 157x 157X94mm
• Weight: About 2.2kg
• Implementation Standard: Q/BASEUS 047
• List of Accessories: Superior Series Fast Charging Data Cable Type-C to Type-C (240W), User Guide, Warranty Card,Storage bag

Package Including

• Baseus ioTa Series Portable Power Station 140W (US/JP 110V) X 1
• Superior Series Fast Charging Data Cable Type-C to Type-C (240W) X 1
• User Manualx1
• Warranty Cardx1
• Storage bagx1

Schematic Display of Product

Download the Baseus App and User Manual

• Scan the QR code on the right for the download address with your mobile device, or https://us.baseus.com/download (in other languages) in the search bar to download the app.
• Please follow the guide in the app to register (if you have registered, please login directly), login, add equipment, and then connect and operate.

Instructions

Note: The following instructions assume that the APP has been connected to the product. If the connection is broken or the distance between them is too far (over 10 meters), the APP may not be able to instantly respond or issue reminders or alerts timely, affecting user experience. It is recommended to use the product while keeping the APP on and keep them close for smoother use.

1. Start/shutdown

   • Press the power button for 2s to turn on the product, the power indicator lights up, screen prompts to enter standby mode

   • In the power-on state, press and hold the power button for 2 seconds to turn it off with the power indicator off.

   • The default standby time of this product is 15 minutes. If the inverter switch/LED light switch is off and the product has no load
     accessed, the product will automatically turn off in 15 minutes.

2. How to charge a device

   • Charge a device via a USB/Type-C/DC port

   • After the product is turned on, the USB/Type-C/DC port will enter the standby mode and can be used to charge cell phones or
     other digital products with compatible data cables.

   • Meanwhile, the main screen will display four parameters for reference, including the current total output power, current
     temperature, remaining battery level, and remaining discharge time under the current output power.
     

   • Charge a device via the AC port

   • After the product is turned on, press and hold the AC output button for 2 seconds to enable AC inversion output, with the
     AC output indicator on. Now you can plug in and charge an AC device.

   • Under the AC output state, press and hold the AC output button for 2 seconds to disable AC inversion output, with the AC
     output indicator off.
     Warning: There is a high voltage output after the AC inversion output is enabled. Please do not plug metal or
     conductive objects into the AC main socket to avoid electric shock.

3. How to charge the product

   • This product supports up to 140W PD fast charging, and accommodates all adapters and car-mounted chargers that are compatible with the PD protocol.

   • When the product starts charging, it will enter the power-on state automatically in order to monitor all modules and provide feedback on operation status in real time.
     Note:

   • The product will not enter automatic shutdown when it is charged with a device through USB/Type-C/DC/AC ports.

   • The value of each parameter on the main screen is measured by a built-in program, which may be subject to errors and changes in real time. The parameter information is for reference only.

   • Please check the charging and discharging chart of the ports in the APP for more details about the charging and dischargingof the ports.

4. LED Lighting

   • This product comes with a LED floodlight for emergency lighting needs

   • Press and hold the LED Switch/mode switch button for 2 seconds to turn on the LED light. The light has a default state of staying on
     for long; or it can be switched by pressing applicable buttons to two other modes which are SOS and strobe.

   • Please adjust the brightness under the long-on mode in the app.

   • Under the LED lighting state, press and hold the LED Switch/mode switch button for 2 seconds to turn it off.
     Note: If the LED lighting is on, the default standby time of this product will be adjusted to 8 hours for any need of emergency lighting at night.

Advanced use of the APP

• You can contact Baseus for lon 1 customer service via the app to solve problems you may have.
• The device name can be edited in the app.

FAQ

1. What type of battery is used in the product?
   This product uses high quality automotive-grade lithium iron phosphate battery.

2. What equipment can be charged via the AC output port of the product?
   The AC output of the product is rated at 140W with a peak power of 28OW, being able to supply power to most consumer electronics. However, please check the rated power of your equipment and make sure that the total power of all load equipment is lower than the rated power before using it.

3. How do l know how long the product can supply power?
   The LCD display will show the remaining battery life and calculate a remaining discharge time based on the current power, for reference only.

4. How can I tell the product is charging?
   When charging, the LCD display will show the remaining charging time and input power.

5. Does the product support simultaneous charging and discharging?
   The Type-C port and USB port support simultaneous charging and discharging.
   

6. How to clean this product?
   Please use a dry, soft and clean cloth or paper towel to wipe this product. and USB port support simultaneous charging and discharging,

7. Can I carry this product on the plane?
   Air transportation requires the carried device no greater than 160Wh, and this product is only 153.6Wh, so with the airline’s
   approval, you can bring this product on a plane (please refer to the airline’s requirements on the spot at the time).
   

8. How do I store and maintain the product? product on the plane?
   

   • It is recommended to use or store the product with a temperature of 20-30°C, and keep it away from water, heat source and metal objects.
     approval,.you can bring this product on a plane (please refer to’the airlime’s requireiments on the spe

   • For long-term storage, please charge and discharge the product once every 3 months (discharge it to 30% and then charge it to 60%).

   • For safety reasons, do not store this product when the temperature is higher than 45°C or lower than -10°C for a long time.

   • If the power of this product is less than 1% after use, please charge it to 80% before storing it. If left idle for a long time in
     low or full battery, its battery core will suffer irreversible damage and the service life of the product will shorten.

   • If the product has low remaining power and has been idle for too long (not in over-discharged state), it will enter deep sleep
     mode and need to be charged before being used again.

Common Problems & Troubleshooting

If any alert occurs during the use of this product and the alert icon does not disappear after the product is restarted, please stop using the product immediately (do not attempt to charge or discharge). If the above information fails to resolve your problem, please contact customer service for further support.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>