Yuwei AW020P Portable Power Bank User Manual
- June 1, 2024
- yuwei
Table of Contents
User Manual
Portable Power Bank
[U288]
————————
MODEL: AW020P
: chargers@support20h.com
: Top Outdoor Products Support
Kindly Remind:
If you encounter a problem when using this product, but the return window has
been closed. You can contact us via Amazon or the Service Email
(chargers@support20h.com), we will send you a
Replacement or Refund.
Layout
-
Apple Watch Wireless Charging Pad
-
Wireless Indicator Light
-
Power button
-
USB C port (Output/Input)
-
Power Indicator Light x4
-
USB A port (Output)
-
Lightning Cable
Specification
Model
| AW020P
---|---
Battery Capacity|
3.85V 10000mAh/38.5Wh
Input
| IN1: 5V⎓3A 9V⎓2A
Output|
OUT1: 5V⎓3A 9V⎓2.22A 12V⎓1.67A
OUT2: 5V⎓3A 9V⎓24 12V⎓1.5A
5V⎓4.5A 4.5V⎓5A
Lightning Cable
| 5V⎓2.4A
Apple Watch Wireless Charging|
2.5W
Dimensions
| 4.56×2.79×0.86 in (11.6×7.1×2.2cm)
Operating Temp Range|
32°F to 113°F (0°C to 45°C)
Wireless Charging for Apple Watch
Charge Your iPhone by Lightning Cable
Charge Your Phone or Tablet.
Recharge your power bank.
(Use PD/QC adapter to achieve faster charging.)
Please fully charge the power bank before first use.
Wireless Charging Safety Protection
When the metal touches its wireless charging pad, the green light will flash and the other lights will stay on white.
Attention
To preserve lifespan, recharge every 3 months.
Use original or certified cables.
Don’t expose to liquids.
Don’t disassemble.
Avoid dropping/scratch.
Avoid extreme temperatures.
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the product.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>