ROLLTITE R500 Series Rolling Steel Fire Doors Owner’s Manual

: June 1, 2024
: ROLLTITE

Table of Contents

ROLLTITE R500 Series Rolling Steel Fire Doors
Product Information
PRODUCT SPECIFICATIONS
Limited Warranty
CONTACT
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ROLLTITE R500 Series Rolling Steel Fire Doors

Product Information

Specifications

Max Width: 30′
Max Height: 24′
Materials: Galvanized steel with baked polyester & epoxy primer
Max sq. ft. Curtain: 600 sq. ft.
Finish/Colour: Standard colours (white, gray, tan or galvanized). Powder coat available in RAL

Frequently Asked Questions

Q: Can the fire door be connected to a central alarm system?
- A: Yes, the fail-safe operating system can be wired to a central alarm system using one of our release devices.
Q: What is the finish warranty on the door?
- A: The powder coat finish comes with a 40-year film integrity warranty and a 35-year no-chalk/no-fade limited paint warranty.
Q: Is polyurethane insulation available for the door curtain?
- A: Yes, optional polyurethane insulation with R 7.2 value is available for improved insulation properties.

The R500 Series is manufactured to the highest standards featuring space saving designs with user-friendly operation. The fail-safe operating system is activated by fusible links, smoke detectors, or can be wired to a central alarm system by one of our release devices. R-W’s fire door is designed and manufactured to mount to steel, concrete, masonry block (filled or hollow) or wood. Motor operator include time delayed automatic closing, auto reset overload protection, monitored battery back-up, low battery warning, keyed test station, detector/alarm input, 24-volt control circuit.

ROLLTITE-R500-Series-Rolling-Steel-Fire-Doors-FIG-1

STANDARD FEATURES

Size up to 30′ wide by 24′ high (max 600 sq. ft.)
Easy and fast reset & testing
UL /ULC / FM rated
Conforms to NFPA 80
25,000 cycle spring
2 year limited warranty

PRODUCT SPECIFICATIONS

Developed to allow the safe emergency closing when activated by our 165° fusible link, or when activated by another release device. The door will automatically descend to the floor at a controlled rate. This system eliminates the danger associated with a free falling door.

Drop Testing and Auto Reset

ROLLTITE-R500-Series-Rolling-Steel-Fire-Doors-FIG-2

Floor level release and reset handle provided with the chain hoist.
Key test station provided with motor operation. No tools or ladders required to drop test or reset the door.

OPTIONS

Fire Ratings: 45/90 minutes, 3 hours or 4 hours (18-gauge only).
Automatic Closing Devices: XP, XPBB, AFCB.
Detection and Activation Devices: Smoke and heat detector, horn.
Optional Mounting: Between jamb under lintel (fascia required) or above lintel.
Vision Panels: 5″ wide x 3/4″ high available on any UL rating.
Flame Baffle and Jamb Seal: Helps prevent smoke infiltration through the header and jamb. NFPA105 Smoke control upon request.
High Cycle Springs: Available in 50,000 cycles and 100,000 cycles.
Max Width: 30′
Max Height: 24′
Materials: Galvanized steel with baked polyester & epoxy primer.
Max sq. ft.: 600 sq. ft.
Curtain: 3″ fl at slats, 22, 20 or 18 ga.
- Optional polyurethane insulation R 7.2
Finish/Colour: Standard colours (white, gray, tan or galvanized).
- Powder coat available in RAL.
Endlocks: Endlock or windlocks on every alternate slats.
Operation: Manual/Chain hoist or electric operator.
Guide: Structural steel with 30″ service cutout and removable headstop. 3/16″ minimum thickness.
Bottom Bar: Structural steel two-piece angle and bulb weatherseal.
Hood: 24 ga galvanized steel with baked epoxy primer and baked polyester. Over 16′ wide, steel bracket added.
Counterbalance: 25,000 cycle oil-tempered helical torsion spring.
Barrel: Steel pipe drum build with maximum deflection of .03″/ foot width. Spring to be mounted on a cold rolled steel inner shaft with self-lubricating end ball bearing.
Brackets: Head plate fabricated from 1/4″ steel.