ROLLTITE R550 Series Rolling Steel Fire Shutters Owner’s Manual

June 1, 2024
ROLLTITE

ROLLTITE R550 Series Rolling Steel Fire Shutters

ROLLTITE-R550-Series-Rolling-Steel-Fire-Shutters-
product

Product Information

Specifications

  • Max Width: 12′ manual push up or 13′ with crank awning
  • Max Height: 8′
  • Materials: Galvanized steel with baked polyester & epoxy primer; #4 Stainless steel for R520S
  • Curtain Finish/Colour: Standard colors (white, gray, tan or stainless steel); Powder coat available in RAL
  • Endlocks: Steel endlock on every alternate slat
  • Operation: Manual pushup up to 10′ 4, wider doors crank operation

FAQ

  • Q: Can the fire shutter be customized for different fire ratings?
    • A: Yes, the product is available in 90 minutes and 3 hours fire ratings.
  • Q: What are the options for automatic closing devices?
    • A: Automatic Closing Devices options include XP, XPBB, and AFCB.
  • Q: Is there a warranty on the finish of the product?
    • A: The powder coat finish comes with a 40-year film integrity and a 35-year no-chalk/no-fade limited paint warranty.
  • Q: What is the address of the manufacturer?
    • A: The manufacturer’s address is 5100 Timberlea Blvd Mississauga ON L4W 2S5 Canada.

Introduction

R-W’S R500 SERIES FIRE SHUTTER is manufactured with U.L. fire ratings and is a cost effective way of protecting property in case of a fire, while increasing building safety for occupants.

The R550 Series is manufactured to the highest standards featuring, space saving designs and user-friendly operation. The fail-safe operating system is activated by fusible links, smoke detectors or can be wired to a central alarm system by one of our release devices. The R550 Series is the perfect choice for pharmacies, cafeterias, concession areas, ticket counters, nurse/hospital desks, and many more applications where a fire-rated wall exists.

STANDARD FEATURES

  • Size up to: 13′ wide by 8′
  • Easy and fast reset & testing
  • UL/ULC/FM rated
  • Conforms to NFPA 80
  • 25,000-cycle spring
  • 2 year limited warranty

FEATURES

ROLLTITE-R550-Series-Rolling-Steel-Fire-Shutters-fig-1

PRODUCT SPECIFICATIONS

Developed to allow the safe emergency closing when activated by our 165° fusible link, or when activated by another release device. The door will automatically descend to the fl oor at a controlled rate. This system eliminates the danger associated with a free-falling door.

Drop Testing and Auto Reset

ROLLTITE-R550-Series-Rolling-Steel-Fire-Shutters-fig-2

  • Floor level release and reset handle provided with the chain hoist. Key test station provided with motor operation.
  • No tools or ladders required to drop test or reset the door.

OPTIONS

  • Fire rating: Available in 90 minutes and 3 hours.
  • Automatic Closing Devices: XP, XPBB, AFCB.
  • Detection & Activation Devices: Smoke and heat detector horn.
  • Optional Mounting: Between jamb under lintel (fascia required) or above lintel.
  • Vision Panels: 5″ wide x 3/4″ high available on any UL rating.
  • Flame Baffl e & Jamb Seal: Helps prevent smoke infiltration through the header and jamb. NFPA105 Smoke control upon request.
  • Locks: Slide lock, thumb-turn or cylinder.

FINISH

ROLLTITE-R550-Series-Rolling-Steel-Fire-Shutters-fig-4

  • Max Width: 12′ manual push up or 13′ with crank awning.
  • Max Height: 8′
  • Materials: Galvanized steel with baked polyester & epoxy primer.
    • 4 Stainless steel (R520S)

  • Curtain: 1-1/2″ slats, 22 ga.
  • Finish/Colour: Standard colours (white, gray, tan or stainless steel) Powder coat available in RAL.
  • Endlocks: Steel endlock on every alternate slat.
  • Operation: Manual pushup up to 10′ 4″, wider doors crank operation.
  • Guide: Boxed shaped powder coated steel guides and curtain stops or stainless steel on model R520S.
  • Bottom Bar: Two-piece steel or stainless angle and bulb weatherseal.
  • Hood: 22 ga galvanized steel with baked epoxy primer and baked polyester. Stainless steel (R520S).
  • Counterbalance: 25,000 cycle oil-tempered helical torsion spring.
  • Barrel: Barrel fabricated from minimum 4-1/2″ O.D. pipe, with 1″ tension and drive shaft and provided with lugs welded to barrel for curtain assembly. Springs to be oil tempered grease packed helical torsion type.
  • Brackets: 1/4″ steel plate powder coated with self aligning bearing.

Limited Warranty

  • 2 year limited warranty

Contact

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals