Defvnsy 1142 3014 54-SMD Turn Signal Light Instruction Manual
- June 16, 2024
- Defvnsy
Table of Contents
Defvnsy 1142 3014 54-SMD Turn Signal Light Instruction Manual
Product Specification:
- Base type : 1142 BA15D
- Voltage : 12V DC
- Brake Power : 1.32W
- Luminous Efficiency : 800lm
- Lamp Beads: 3014
- Number of Beads: 54SMD
- Size: 35mm*16mm
Application:
This light includes BA15D and 1142,1130,1196,1004,94 base, which can be used
for the following positions:
Dome Light, Tail Box Light, Reading Light, Door Light, License Plate Light and
act.
Installation Requirements and Maintenance:
- Sort out all parts and accessories which will be used in lighting fixtures.
- Turn off the power before installation.
- If you are using this product for a replacement, please check the compliance of the product interface with the old one carefully. Do not use it incorrectly.
- Before switching on the power, please settle the voltage supply within the allowed value.
- Make sure all things have been carefully checked, and then turn on the power
Safety Attention:
- Failure to follow instructions may result in danger.
- Please be sure to use it within the operating voltage, which is quite important.
- It can ONLY be connected to current DC, not AC.
- Connecting to AC voltage or exceeding maximum voltage value may cause bulb burning out, please be careful on this.
After-Sales Service:
All products purchased from us are guaranteed to keep in good repair for one
year. Any quality problem happened within this period, we will maintain or
provide alternatives for free. If you came into any problems when using our
products, welcome to contact us at any time. We promise to help you solve them
positively and timely
Read User Manual Online (PDF format)
Loading......