DEFVNSY BA15S Turn Signal Light Instruction Manual
- June 14, 2024
- Defvnsy
Table of Contents
DEFVNSY BA15S Turn Signal Light
Product Information
Specifications:
- Product Name: 1156 4014 39-SMD Turn Signal Light
- Base type: 1156 BA15S
- Voltage: 12V DC
- Brake Power: 2.2W
- Luminous Efficiency: 500lm
- Lamp Beads: 4014
- Number of Beads: 39SMD
- Size: 38mm * 15mm
Application:
This light includes P21W, 1141, 1003, and 7506 base types, which can be used
for the following positions:
- Dome Light
- Tail Box Light
- Reading Light
- Door Light
- License Plate Light
- and more.
Installation Requirements and Maintenance:
Follow these steps for installation:
- Sort out all parts and accessories that will be used in the lighting fixtures.
- Turn off the power before installation.
- If you are using this product as a replacement, carefully check the compliance of the product interface with the old one.
- Do not use it incorrectly.
- Before switching on the power, ensure the voltage supply is within the allowed value.
- Make sure all things have been carefully checked, and then turn on the power.
Safety Attention:
Failure to follow instructions may result in danger. Please take note of the
following safety precautions:
- Use the product within the operating voltage.
- It can ONLY be connected to the current DC, not AC.
- Connecting to AC voltage or exceeding the maximum voltage value may cause the bulb to burn out, so please be careful.
After-Sales Service:
All products purchased from us are guaranteed to keep in good repair for one
year. If any quality problems occur within this period, we will provide
maintenance or alternatives for free. If you encounter any issues when using
our products, please feel free to contact us at any time. We promise to help
you solve them positively and in a timely manner.
FAQ (Frequently Asked Questions)
-
Q: Can this turn signal light be used for any other applications?
A: Yes, this turn signal light can also be used as a Dome Light, Tail Box Light, Reading Light, Door Light, License Plate Light, and more. -
Q: Can I connect this turn signal light to an AC power source?
A: No, this turn signal light can ONLY be connected to the current DC, not AC. Connecting it to AC voltage may cause the bulb to burn out. -
Q: What should I do if the product stops working within the warranty period?
A: If any quality problems occur within one year of purchase, please contact us. We will provide maintenance or alternatives for free.
Product Name:
1156 4014 39-SMD Turn Signal Light
Product Specification
- Base type: 1156 BA15S
- Voltage: 12V DC
- Brake Power: 2.2W
- Luminous Efficiency: 500lm
- Lamp Beads: 4014
- Number of Beads: 39SMD
- Size: 38mm*15mm
Application
This light includes P21W,1141,1003,7506 base, which can be used for the following positions:
- Dome Light, Tail Box Light, Reading Light, Door Light, License Plate Light, etc.
Installation Requirements and Maintenance
- Sort out all parts and accessories which will be used in lighting fixtures.
- Turn off the power before installation.
- If you are using this product for a replacement, please check the compliance of the product interface with the old one carefully. Do not use it incorrectly.
- Before switching on the power, please settle the voltage supply within the allowed value.
- Make sure all things have been carefully checked, and then turn on the power.
Safety Attention
- Failure to follow instructions may result in danger.
- Please be sure to use it within the operating voltage, which is quite important.
- It can ONLY be connected to the current DC, not AC.
- Connecting to AC voltage or exceeding the maximum voltage value may cause bulb burnout, please be careful about this.
After-Sales Service
All products purchased from us are guaranteed to keep in good repair for one year. If any quality problem happens within this period, we will maintain or provide alternatives for free. If you come into any problems when using our products, welcome to contact us at any time. We promise to help you solve them positively and timely.