Defvnsy 1141 Turn Signal Light Instruction Manual
- June 14, 2024
- Defvnsy
Table of Contents
Defvnsy 1141 Turn Signal Light
Product Information
Specifications:
- Product Name: 1156 2835 33SMD Turn Signal Light
- Base type: 1156 BA15S
- Voltage: 12V-24V DC/AC
- Brake Power: 3.6W
- Luminous Efficiency: 600lm
- Lamp Beads: 2835
- Number of Beads: 33SMD
- Size: 40mm*18mm
Application:
This light includes P21W, 1141, 1003, 7506 base, which can be used for the
following positions:
- Dome Light
- Tail Box Light
- Reading Light
- Door Light
- License Plate Light and etc.
Installation Requirements and Maintenance:
- Sort out all parts and accessories which will be used in lighting fixtures.
- Turn off the power before installation.
- If you are using this product for a replacement, please check the compliance of the product interface with the old one carefully.
- Do not use it incorrectly.
- Before switching on the power, please settle the voltage supply within the allowed value.
- Make sure all things have been carefully checked, and then turn on the power.
Safety Attention:
Failure to follow instructions may result in danger. Please be sure to use
it within the operating voltage, which is quite important. It can ONLY be
connected to current DC, not AC. Connecting to AC voltage or exceeding the
maximum voltage value may cause bulb burning out, please be careful on this.
After-Sales Service:
All products purchased from us are guaranteed to keep in good repair for
one year. Any quality problem happened within this period, we will maintain or
provide alternatives for free. If you came into any problems when using our
products, welcome to contact us at any time. We promise to help you solve them
positively and timely.
FAQ
-
Can I use this turn signal light on a 24V AC system?
No, this turn signal light can only be connected to current DC, not AC. Connecting it to AC voltage may cause the bulb to burn out. -
What is the warranty period for this product?
The product comes with a one-year warranty. If any quality problems occur within this period, we will provide maintenance or alternatives for free. -
What should I do if I encounter any issues with the product?
If you face any problems while using our product, please feel free to contact us at any time. We are committed to helping you solve your issues promptly and effectively.
Product Specification
- Base type: 1156 BA15S
- Voltage: 12V-24V DC/AC
- Brake Power: 3.6W
- Luminous Efficiency: 600lm
- Lamp Beads: 2835
- Number of Beads : 33SMD
- Size: 40mm*18mm
Application
This light includes P21W, 1141, 1003, 7506 base, which can be used for the
following positions:
Dome Light, Tail Box Light, Reading Light, Door Light, License Plate Light and
ect.
Installation Requirements and Maintenance
- Sort out all parts and accessories which will be used in lighting fixtures.
- Turn off the power before installation.
- If you are using this product for a replacement, please check the compliance of the product interface with the old one carefully. Do not use it incorrectly.
- Before switching on the power, please settle the voltage supply within the allowed value.
- Make sure all things have been carefully checked, and then turn on the power.
Safety Attention
- Failure to follow instructions may result in danger.
- Please be sure to use it within the operating voltage, which is quite important.
- It can ONLY be connected to current DC, not AC.
- Connecting to AC voltage or exceeding maximum voltage value may cause bulb burning out, please be careful on this.
After-Sales Service
All products purchased from us are guaranteed to keep in good repair for one year. Any qualityproblem happened within this period, we will maintain or provide alternatives for free. If youcame into any problems when using our products, welcome to contact us at any time. We promise to help you solve them positively and timely.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>