Defvnsy T4W BA9S 53 LED Bulb Instruction Manual
- June 16, 2024
- Defvnsy
Table of Contents
Defvnsy T4W BA9S 53 LED Bulb Instruction Manual
Instruction Manual
Product name:
BA9S 5050 5SMD LED Ligh
Product specification:
- Base type: T4W BA9S
- Voltage: 12V DC
- Power: 0.6W
- Lamp Pearls: 5050
- Number of Beads: 5SMD
- Luminous Efficiency : 100lm
- Size: 28mm 10mm
- Decode : No
- Non-polarised: No
Application:
This light includes T4W, BA9, BA9S, 53, 57, 1895, 64111 base, which can be
used for the following positions:
Dome light, Rear boot light, Reading light, Door light, Licence plate light
and ect.
Installation requirements and maintenance:
-
Sort out all parts and accessories that will be used in lighting fixtures.
-
Turn off the power before installation.
-
When using this product for replacement, carefully check that the product’s interface matches
the old one. Do not use it incorrectly. -
Before turning on the power, the voltage should be within the permissible value.
-
Make sure that everything has been carefully checked, then turn on the power.
Safety instructions:
- Not following the instructions may cause danger.
- Make sure the device is used within the permissible voltage, which is very important.
- It can ONLY be connected to direct current, not alternating current.
- Connection to AC voltage or exceeding the maximum voltage value may cause the lamp to burnout. Please be careful about this.
After-sales service:
All products purchased from us are guaranteed to keep in good repair for one
year.
Any qualityproblem happened within this period, we will maintain for free or
provide alternatives.
If you raninto any problems when using our products, welcome to contact us at
any time.
We promise tohelp you solve them positively and timely.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>