QPlay SEMA Sema Scooter User Manual
- June 1, 2024
- QPlay
Table of Contents
QPlay SEMA Sema Scooter
Product Specifications
- Maximum Load : 50kg
- Product Materials: Steel/PP/PTR/PE
- Dimensions: 830x280x890mm
Product Usage Instructions
Assembly
- Identify components A, B, and D.
- Follow step 2, step 3, and step 4 for assembly.
- Refer to the provided diagram for proper assembly steps.
Modes of Use
- PUSH MODE : Description of push mode functionality.
- RIDE-ON MODE : Instructions for using the ride-on mode.
- SCOOTER MODE : Guidelines for operating the scooter mode.
Warning and Care/Maintenance
Warning: Insert the T bar(D) into the hole at the front of the deck as shown in the picture for pulling it on the go or storing it.
Care/Maintenance: Clean with a damp sponge or cloth. Do not submerge the item into water.
FAQ
- Q: Where can I find spare parts for the product?
- A: For spare parts, please contact your nearest Smyths store or Smyths customer services via email at cshelpdesk@smythstoys.com.
COMPONENTS
Product
Functions : Adjustment of T bar: T bar is adjustable to 3 height options.
Loosen the clamp of the T-bar handle when adjusting. Double-check that the
spring-loaded button is engaged and locked correctly in one of the 3 holes.
Tighten the clamp to secure the T-bar handle after adjustment. Braking: A
brake is located at the rear, when necessary press down on it to slow down.
Press down gradually in order to prevent skidding or loss of stability.
Clearly explain to the child how to stop the scooter before use. Lean-to-
steer: Featuring Lean-to-Steer technology, this scooter is self-balancing.
Instead of turning the handlebars, children can steer the scooter simply by
leaning. This helps to develop their balance and coordination. When the
scooter is used in Push mode (stages 1 & 2), please lock the steering system.
Product Specifications
PUSH MODE
RIDE ON MODE
SCOOTER MODE
Insert the T bar(D) into the hole at the front of the deck as shown in the picture for pulling it on the go or storing it at home
WARNING
Warning! Protective equipment should be worn. Not to be used in traffic.
50 kg max. Recommended
age : 1-6 years.
GENERAL WARNINGS ON USE OF THE PRODUCT
Read these instructions before use, follow them and keep them for reference. Prior to use, make sure that the product has been assembled properly. This product includes tightening devices based on bolt-nut coupling in order to allow the components dismantled. Those devices may lose efficiency and need periodic check of proper tightening. Make sure that all locking mechanisms are securely locked. The product should be used with caution since skill is required to avoid falls or collisions causing injury to the user or third parties. To use with suitable protective equipment, including a helmet, shoes, elbow, wrist and knee protectors. Teach the child how to use it safely and responsibly. Wear gym shoes and protective clothing. Use it exclusively on a flat, clean surface, free of gravel and grease. Avoid bumps and drainage grates that may cause an accident. Not suited for use at night or during periods when visibility is limited. Do not allow more than one child to ride the product at thesame time. Do not use on wet days, or on wet ground. It is dangerous to use the toy close to obstacles like steps, benches, etc. It is prohibited to use the product in descent as this is inappropriate and very dangerous. The task of teaching the child how to use the product is delegated to the expertise and responsibility of the parents or whoever is in charge of the child. Do not allow a child to use the product without assistance if he/she does not yet possess the necessary experience/skill and has not yet acquired the ability to master steering and balance. Children should be taught the importance of careful driving in order to avoid accidents involving themselves or others. The product can be dangerous and can cause traffic accidents when used on public highways. Don’t use on public roads.
CARE/ MAINTENANCE
Regular maintenance is a safety commitment:
Wheel bearings: avoid riding through water, oil or sand as this can
damage wheel bearings.
Wheels: the wheels wear down with time and can be damaged if overly used
on rough surfaces.
The back wheel on which the brake is applied is particularly affected after
several hours of braking. In the interests of safety, they should be checked
regularly and changed if necessary.
Modifications : the original product must by no means be modified except
for the maintenance
- related changes mentioned in these instructions.
Nuts and axles: these should also be checked regularly. They can become loose after a while in which case they should be tightened. They can become worn and not tightened properly, in which case they should be replaced.
Cleaning: Clean with a damp sponge or cloth. Do not submerge the item into water.