Huien HE-065 Wireless Earbuds Instruction Manual
- June 1, 2024
- Huien
Table of Contents
Huien HE-065 Wireless Earbuds
Product Information
Specifications:
- Model: HE-065
- Product Code: AD6973D4
- Power Output: 400W
- Frequency: 40Hz
Product Usage Instructions
Safety Instructions:
Any changes or modifications not approved by the responsible party may void
the user’s authority to operate the equipment.
FCC Compliance:
This device complies with part 15 of the FCC Rules. Operation is subject to
the following conditions:
- The device must not cause harmful interference.
- The device must accept any received interference, including that which may cause undesired operation.
Radiation Exposure:
The equipment complies with FCC radiation exposure limits for uncontrolled
environments. To minimize exposure, the transmitter should not be co-located
or operate with any other antennas or transmitters.
To reduce interference, consider the following:
- Reorient or relocate the receiving antenna.
- Increase separation between equipment and receiver.
- Connect the equipment to a different circuit than the receiver.
- If needed, consult a dealer or radio/TV technician for assistance.
FAQ
-
Q: Can I modify the product without voiding warranty?
A: No, any changes or modifications not expressly approved may void the warranty and the user’s authority to operate the equipment. -
Q: What should I do if I experience interference?
A: If you experience interference, try reorienting the antenna, increasing separation from other devices, or consult a professional for assistance.
Instruction Manual
Wireless Earbuds
Model: HE-065
Please read the instructions before use
Overview
Connect
- After opening the charging case, turn on the headset, accompanied by the tone, the left and right headset automatically complete the pairing.
- Enable Wireless function on mobile phone, connect the wireless, at the first time you need to manually connect the device. Successful connection accompanied by a tone.
- The orange light flashes when the charging case is charging, the orange light is always on when fully charged. When the cover is opened, the red and blue lights flash alternately when not paired and the lights go out after pairing.
Operation
- Play/Pause : Click the touch area (left/right headset)
- Next track: Double-click the right headset touch area
- Prev track: Triple-click the left headset touch area
- Wake up “Siri”: Long press the touch area 2S (left/right headset)
- Answer / hang up: Click/Double- click the touch area (left/right headset)
- Reject : Long press the touch area 25 (left/right headset)
- Turn off: Put in the charging case and close the lid turn off
Specifications
- Chipset: AD6973D4
- Frequency response sensitivity: 20Hz-20KHz
- Effective distance: >11m (line)
- Charging box battery capacity: 400 mah
- Earbuds battery capacity: 40 mah
- Standard voltage: 3.7V
- Standby time: 25H
- Earbuds charging time: About 60mins .
- Charger box charging time: About 1H
- Music playing time: 5H(Volume 80%)
- Talk time: 4.5H (Volume 80%)
- MIC: with MIC Sensitivity -42db‡3db
FCC Warning
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
- This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
- This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Note:
- This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>