Dongguan Huien Electronic Technology Q76 True Wireless Stereo Earphone User Guide
- June 3, 2024
- Dongguan Huien Electronic Technology
Table of Contents
True Wireless Stereo Earphones
Table of Product Contents
Product Specification
rcc id : 2a2syHe-057
| Bluetooth Version: | 5.3 |
|---|---|
| Support: | HFP/A2DP/HSP/AVRCP |
| Charging Port: | Type-C |
| Battery life: | 12 hours of use per full charge of both earbuds actual battery |
life varies with song type and volume requirements)
Chargingtime: ne.| 1.5 hours for earbuds / 2 hours for charging case
Transmission range:| 15 meters (without obstacles)
Introduction
How do I pair two headphones with my phone?
-
Please make sure both the earbuds and the charging case are fully charged before first use.
-
Step 1
Take both earbuds out of the charging case and both earbuds will power on and start pairing automatically.[If the earbuds are not connected to your device for more than 5 minutes, the earbuds will automatically turn off. Press the MFB button for about 3 seconds to manually turn on the earbuds when prompted “Power on”. The indicator light of “one” earbud will flash Green and white alternately, The “other” earbud’s light goes out to indicate that the pairing of the wireless headset is complete. -
Step 2
Enable the Bluetooth pairing mode on your phone device, search and select “Q76” to connect. (You should hear a voice prompt “Connected” when wearing earbuds). -
If indicator light of earbud is off,it means the phone is connected e Automatic connection By default, the earbuds will connect the last paired phone automatically when power on.
- Prompt
- If you have any problem pairing the two earbuds with your phone, put the earbuds back in the charging case and repeat the above steps.
- These earbuds can be used not only together, but also individually If you want to use single earbud, just take one earbud out of the case and connect it to your phone. or when using two earbuds, manually turn off one earbud or put one back in the charging case and you’ll be able to use the other one earbud alone.
Functions
Telephone Communication
| Answer call: | tap once |
|---|---|
| Hangup: | press and hold the key for 2s |
| Refuseincomingcall: | press and hold the key for 2s |
For Music
| Play/pause | tan twice |
|---|---|
| Previous track | press and hold “L” for 2s |
| Nexttrack | Press and hold “R” for 2s |
| Activate Siri | quickly tap for three times |
| Turndown volume | single tap on left earbud |
| Turn up volume | single tap on right earbud |
Charging
-
Earbuds Charging
The earbuds will only be charged when you place them in the charging slots correctly.(You can charge the charging case and the earbuds at the same time, or you can charge the charging case first and then the earbuds.
The indicator light will show green while charging.
When the earbuds are charging in the charging case, the green light of the earbuds is always on, when it is full the earbuds indicator lights up green, after 5 seconds the green light goes off. -
Case Charging
There is a Type-C usb charging cable in the package, please use it to charge the case directly. During charging, the digital display will flash and display the battery level in real time. When fully charged, the number shows 100.
Charging Alerts
- After using it for a long period of time, due to the oxidation of the magnet connector, the earbuds might not be charged or even turned on.
- You can fix this problem by cleaning the magnet connectors on the earbuds and charging case with an alcohol wipe
- Put the earbuds in the charging case, the earbuds will turn off immediately and the charging case will start to charging automatically.
- The earbuds will connect the last paired phone automatically.
Storage and Maintenance
- If the earbuds have not been used for more than 3 months, we recommend that you charge it.
- Please use an charger approved by FCC (Federal Communications Commission).
- Children aged 12 and under require adult supervision.
- Do not expose the earbuds to high or low temperatures, and do not use the earbuds during a thunderstorm.
- Avoid free fall or violent shock to the device. Keep the device away from sources of fire and do not place the device in water.
Frequently Asked Questions
Q : Why don’t these earbuds pair with my phone?****
– A : Make sure the earbuds are fully charged and powered on.
– Make sure your phone’s Bluetooth is enabled
– If there is no problem with the two points stated above, turn off the
powered-on earbuds after 5 continuous and quick clicks.
– Put them back into the charging case and close the lip, wait for 1 minute,
then open the charging case and reconnect the earbuds to the phone.
Q : Why does the music cut in or out?****
– A : First, keep the earbuds no more than 15m away from your phone (no
obstacles).
– If the distance is less than 15m, follow these steps:
– 1. Put the earbuds back into the case and close the lid, manually click
“forget the Q76” on your phone
– 2. After 10 seconds, open the charging case and reconnect these earbuds with
your phone
Q : Why the earbuds still won’t be charged or disconnect from the phone after I put them in the case and close the lid?****
– A : Make sure the charging case is not in a low battery state.
– If the charging case is in a low battery state, the earbuds will neither be
charged nor disconnected.
– In this case, please use a type-c charging cable to fully charge the case.
Q : Are these earbuds sweat- and water-resistant?****
– A : These earbuds are sweatproof and IPX7 waterproof. For electronics, we do
not recommend submerging the earbuds in water.
– The earphones are not resistant to hot water, and water vapor will enter the
earphones and damage the components.
– For more detailed product FAQs, please contact our customer service.
Activation & Warranty
In 24 month replacement of damaged, defective item or missing components.
Please activate via email below within 15 days.
aslnskhs@gmail.com
FCC Statement
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>