Huien Electronic HE-008A True Wireless Earbuds Instruction Manual
- June 14, 2024
- Huien Electronic
Table of Contents
HE-008A True Wireless Earbuds
5.3 HiFi Sports Running
Table of Product Contents
Product Specification
Bluetooth Version:…………..5.3
Support: ………………………..HFP/A2DP/HSP/AVRCP
Charging Port:…………………Type-C
Battery life: …………………….8 hours of use per full charge of both earbuds
(actual battery life varies with song type and volume requirements)
Charging time:……………….. 1.5 hours for earbuds / 1.5 hours for charging case
Transmission range: ……….10 meters (without obstacles)
Introduction
How do I pair two headphones with my phone?
-
Please make sure both the earbuds and the charging case are fully charged before first use.
-
Step 1
Take both earbuds out of the charging case and both earbuds will power on and start pairing automatically.[If the earbuds are not connected to your device for more than 5 minutes, the earbuds will automatically turn off. Press the MFB button for about 3 seconds to manually turn on the earbuds when prompted “Power on”.
One earbud will flash a white light, while the other earbud will flash a white light every three seconds, indicating that the wireless earphones have completed pairing. -
Step 2
Enable the Bluetooth pairing mode on your phone device, search and select “HE- 008A” to connect. (You should hear a voice prompt “Connected” when wearing earbuds). -
If indicator light of earbud is off, it means the phone is connected
-
Automatic connection
-
By default, the earbuds will connect the last paired phone automatically when power on.
-
Prompt
- If you have any problem pairing the two earbuds with your phone, put the earbuds back in the charging case and repeat the above steps.
- These earbuds can be used not only together, but also individually
If you want to use single earbud, just take one earbud out of the case and connect it to your phone. or when using two earbuds, manually turn off one earbud or put one back in the charging case and you’ll be able to use the other one earbud alone.
Functions
- Telephone Communication****
Answer call:| tap once
---|---
Hang up:| press and hold the key for 2s
Refuse incoming call:| press and hold the key for 2s - For Music****
Play/pause| tap twice
---|---
Previous track| press and hold “L” for 2s
Next track| press and hold “R” for 2s
Activate Siri| quickly tap for three times
Turn down volume| single tap on left earbud
Turn up volume| single tap on right earbud
Charging
-
Earbuds Charging
The earbuds will only be charged when you place them in the charging slots correctly.(You can charge the charging case and the earbuds at the same time, or you can charge the charging case first and then the earbuds.
The indicator light will show white when charging.
The charging case will stop charging automatically and the indicator light on earbuds will go out when fully charged.
When the earbuds are charging in the charging case, the digital display bar of the case will keep blink and turns off when the earphones are fully charged. -
Case Charging
There is a Type-C usb charging cable in the package, please use it to charge the case directly. During charging, the digital display will flash and display the battery level in real time. When fully charged, the number shows 100.
Charging Alerts
- After using it for a long period of time, due to the oxidation of the magnet connector, the earbuds might not be charged or even turned on.
- You can fix this problem by cleaning the magnet connectors on the earbuds and charging case with an alcohol wipe
- Put the earbuds in the charging case, the earbuds will turn off immediately and the charging case will start to charging automatically.
- The earbuds will connect the last paired phone automatically.
Storage and Maintenance
- If the earbuds have not been used for more than 3 months, we recommend that you charge it.
- Please use an charger approved by FCC (Federal Communications Commission).
- Do not dissemble the earbuds.
- Children aged 12 and under require adult supervision.
- Do not expose the earbuds to high or low temperatures, and do not use the earbuds during a thunderstorm.
- Avoid free fall or violent shock to the device. Keep the device away from sources of fire and do not place the device in water.
FCC Compliance Statements
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
— Reorient or relocate the receiving antenna.
— Increase the separation between the equipment and receiver.
— Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
— Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
FCC Radiation Exposure statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled
FCC ID:2A2BYHE-008A