VOICE CADDIE SL1 Crystal Laser User Manual
- June 1, 2024
- VOICE CADDIE
Table of Contents
VOICE CADDIE SL1 Crystal Laser
Laser LCD Screen Description
- Guides you through the slope compensated distance with the Auto Slope feature.
- If charging is required, icon is displayed in the laser LCD window, and GPS will be turned off and only laser mode will be supported.
- When the icon is on, the device may be turned off and not activated.
-
Power On
After charging the battery, press the Power buttori to turn on the laser and press the GPS power button for more than 3 seconds to turn on the GPS and automatically find the golf couse and hole. -
Mode Selection
Pressing the button toggles in the following sequence: 1 ) Slope Mode (Normal/ Pin/ GPS) and 2) Non-Slope Mode (Normal / Pin/ GPS) -
Unit Conversion
When the button is pressed for more than 3 seconds, the unit will toggle between meters/yards. -
Focus Adjustment
Rotate the focus adjustment of the eyepiece to the left and right to adjust focus.
SL 1 Components
- laler recaving lens / objective lens
- Laser transmitting lens
- Mode button (Basic mode / Pin mode / GPS pin assist mode)
- Power button/ Measurement button
- Eyepiece and focusing unit
- USB charging and data transfer tenninal
- GPS power button
- GPS receiver
Slope Mode – Press the button to turn slope on.
- Normal Mode with Slope
Slope compensated distance guide is displayed to the target point when the Measurement (Power) button is pressed, scan mode is enabled. (Supported in Normal mode only)
- Pin Mode with Slope
This guides you through the slope compensated height of the pin from its current position.
- GPS Pin Assist with Slope
Utilizes GPS data to rapidly and accurately measure the front/back distance to the pin on the green.
-
Normal Mode Without Slope
Only actual distance is displayed to the target point when the Measurement (Power) button is pressed, scan mode is enabled. (Supported in Normal mode only) -
Pin Mode Without Slope
Provides actual distance from its current position to the pin. -
GPS Pin Assist Without Slope
Utilizes GPS data to rapidly and accurately measure the front/back distance to the pin on the green.
Green View (Slope Mode/Tournament Mode)
Green View Feature Tips
- When the GPS power button is pressed and powered on, the device will automatically recognize the current hole. With the external LCD off, a single press of the GPS power button will guide you through the Green View.
- When the external LCD is switched on and the GPS power button is pressed, Green View ( ) will be switched to Distance Guidance ( ).
* **Two Green Guide**
Guides to the left / right green view and the remaining distance.
* The dual peaks in the distance guide means the distance is calibrated and, when the dual peak is off, the device guides you through the GPS referenced linear distance.
* **Green View Color Guide**
Red indicates the highest part of the green and blue indicates the lowest part of the green.
* Green Undulation View is subject to availability and our course data is expanding regularly.
Note
- Battery consumption may vary depending on weather conditions and frequency of use.
- Do not touch the lens directly with your fingers or other objects.
- This device is assembled using high performance, precision equipment.
- The lenses are coated and require periodic cleaning.
- Do not look at the sun directly with the device.
- Do not scan the laser directly into the human eye.
- Connecting the device with a foreign object or outside the dedicated ports may lead to damage
Hard Reset : Press and hold the GPS power button for more than 10 seconds, then press the power switch again to turn it on.
Specifications
- Package Contents: Laser, Pouch, USB Cable, User Manual.
- We recommend using the provided (dedicated USB cable) or (MICRO 5-pin USB cable for general smartphones).
Customer Center
- Call: 1-888-939-3978
- Email: Support@voicecaddie.com
- Website: www.voicecaddie.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>