VOICE CADDIE CL2 Compact Laser Rangefinder User Manual

Table of Contents

VOICE-CADDIE-CL2-Compact-Laser-Rangefinder-PRODUCT

VOICE-CADDIE-CL2-Compact-Laser-Rangefinder-FIG-1

Components

Main body

VOICE-CADDIE-CL2-Compact-Laser-Rangefinder-FIG-2

Power On
- After inserting the battery, press the power button( ) to turn on the LCD screen.
Mode Conversion
- Press and hold the ‘M(Mode) button to convert the mode to an order of Standard Slope Mode (NORMAL) → Slope Pin Mode (PIN) → Standard Tournament Mode (NORMAL) → Tournament Pin Mode (PIN).
Unit Conversion
- Double-press the M button for more than 3 seconds to convert the unit of measure from/to Meter (M) to/from Yard (Y).
Focus Control
- Turn the focus control section of the ocular eyepiece to the left and right to adjust the OLED screen.
OLED Brightness Conversion
- When you press the power button( ) and ‘M(Mode) button at the same time, you can adjust the OLED Brightness step from 1 to 6.
- Press and hold the power( ) button.
- When you dick the ‘M(Mode)’ button in a row, the OLED Brightness step will change Step 1 to Step 6.

Step1-Minimum brightness» Step6-Maximum brightness

Slope Mode

This mode provides distance compensated with the V-algorithm™

Slope Mode (NORMAL)

Scan function
- A mode that measures the compensation distances of a series of different targets

SCAN:

Slope Pin Mode (PIN)

One-touch pin-seeking function
- A mode that is quickly measured with the pin measure algorithm, When you measure the pin right, it will provide a Compensated distance with the vibration.

Long Key function

Press and hold the power button for more than 3 seconds when you measure the pin.
It will provide a more accurate compensated distance with the vibration.

Tournament Mode(Slope Off)

Tournament Mode (NORMAL)

Scan function
- A mode that measures the compensation distances of a series of different targets.

SCAN:

Tournament Pin Mode (PIN)

One-touch pin-seeking function
- A mode that quickly measured with the pin measure algorithm. When you measure the pin right, it will provide an actual distance with the vibration.

Long Key function

Press and hold the power button for more than 3 seconds when you measure the pin.
It will provide a more accurate compensated distance with the vibration.

This device may be affected by the weather such as rain and clouds, and the surrounding environment.
Depending on your environment and how you use it, battery consumption may increase.
Do not use this device for any other purpose such as children’s toys.
If the person’s eye is exposed directly to laser irradiation, or exposed to the sun or strong light through this device, his/her eyesight may be impaired.
The lens is coated, so care must be taken when cleaning. To prevent damage to the lens, do not touch the lens directly with your fingers or rough material.
Do not keep this device in hot places such as exposed to direct sunlight, in closed vehicles on hot days, or with heaters.
The device may be damaged by liquids or other substances. Do not use it in an environment where water can come into contact with it, and wipe off any foreign substances immediately.
Do not randomly modify this device such as dropping, throwing, putting in foreign substances, disassembling, incineration, etc.
Please use only a dedicated battery.
Be careful not to open the pouch and drop the product due to strong movement.
Natural cosmetic deformation and degradation of performance due to normal use and aging are not warranted.

Before using this device, be sure to check the product characteristics and how to use it.
This device was produced through strict quality control and thorough inspection and may be exchanged or reimbursed under the Fair Trade Commission Notice Consumer Dispute Resolution Criteria.
If any problem occurs in normal use, the product will be repaired free of charge within the warranty period
In case of product abnormality caused by the user’s carelessness even if it is within the free warranty period, or in case that the warranty period has expired, it can be repaired on a charge.
For after-sales service and damage compensation, please present this warranty and proof of purchase (receipt).

A/S

Safety and Precaution of Laser

Caution: Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
Class 1 Laser product under IEC 60825-1:2014

Detailed instructions for this product are available from the VOICE CADDIE website.
www.voicecaddie.com

| VOICE CADDIE CL2 Compact Laser Rangefinder [pdf] User Manual
CL2 Compact Laser Rangefinder, CL2, Compact Laser Rangefinder, Laser Rangefinder, Rangefinder
---|---