ECOVACS Deebot U2 Instruction Manual

June 7, 2024
ECOVACS

ECOVACS Deebot U2 Instruction Manual

ECOVACS Logo ECOVACS Deebot U2 Instruction Manual

Live Smart. Enjoy Life.

Should you encounter situations that have not been properly addressed in this Instruction Manual, please contact our Customer Service Center where a technician will be able to help you with your specific problem or question.

For more information, please visit the ECOVACS ROBOTICS official website: www.ecovacs.com

The company reserves the right to make technological and/or design changes to this product for continuous improvement.

Thank you for choosing DEEBOT!

Important Safety Instructions

When using an electrical Appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE

  1. This Appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the Appliance by a person responsible for their safety.
  2. Children should be supervised to ensure that they do not play with the Appliance.
  3. Clear the area to be cleaned. Remove power cords and small objects from the floor that could entangle the Appliance. Tuck rug fringe under the rug base, and lift items such as curtains and tablecloths off the floor.
  4. If there is a drop off in the cleaning area due to a step or stairs, you should operate the Appliance to ensure that it can detect the step without falling over the edge. It may become necessary to place a physical barrier at the edge to keep the unit from falling. Make sure the physical barrier is not a trip hazard.
  5. Only use as described in this manual. Only use attachments recommended or sold by the manufacturer.
  6. Please make sure your power supply source voltage matches the power voltage marked on the Docking Station.
  7. For INDOOR household use ONLY. Do not use the Appliance in outdoor, commercial or industrial environments.
  8. Use only the original rechargeable battery and Docking Station provided with the Appliance from the manufacturer. Non- rechargeable batteries are prohibited.
  9. Do not use without dust bin and/or filters in place.
  10. Do not operate the Appliance in an area where there are lit candles or fragile objects.
  11. Do not use in extremely hot or cold environments (below -5˚C/23˚F or above 40˚C/104˚F).
  12. Keep hair, loose clothing, fingers, and all parts of body away from any openings and moving parts.
  13. Do not operate the Appliance in a room where an infant or child is sleeping.
  14. Do not use Appliance on wet surfaces or surfaces with standing water.
  15. Do not allow the Appliance to pick up large objects like stones, large pieces of paper or any item that may clog the Appliance.
  16. Do not use Appliance to pick up flammable or combustible materials such as gasoline, printer or copier toner, or use in areas where they may be present.
  17. Do not use Appliance to pick up anything that is burning or smoking, such as cigarettes, matches, hot ashes, or anything that could cause a fire.
  18. Do not put objects into the suction intake. Do not use if the suction intake is blocked. Keep the intake clear of dust, lint, hair, or anything that may reduce air flow.
  19. Take care not to damage the power cord. Do not pull on or carry the Appliance or Docking Station by the power cord, use the power cord as a handle, close a door on the power cord, or pull power cord around sharp edges or corners. Do not run Appliance over the power cord. Keep power cord away from hot surfaces.
  20. If the power cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.
  21. Do not use the Docking Station if it is damaged. The power supply is not to be repaired and not to be used any longer if it is damaged or defective.
  22. Do not use with a damaged power cord or receptacle. Do not use the Appliance or Docking Station if it is not working properly, has been dropped, damaged, left outdoors, or come in contact with water. It must be repaired by the manufacturer or its service agent in order to avoid a hazard.
  23. Turn OFF the power switch before cleaning or maintaining the Appliance.
  24. The plug must be removed from the receptacle before cleaning or maintaining the Docking Station.
  25. Remove the Appliance from the Docking Station, and turn OFF the power switch to the Appliance before removing the battery for disposal of the Appliance.
  26. The battery must be removed and discarded according to local laws and regulations before disposal of the Appliance.
  27. Please dispose of used batteries according to local laws and regulations.
  28. Do not incinerate the Appliance even if it is severely damaged. The batteries can explode in a fire.
  29. When not using the Docking Station for a long period of time, please unplug it.
  30. The Appliance must be used in accordance with the directions in this Instruction Manual. ECOVACS ROBOTICS cannot be held liable or responsible for any damages or injuries caused by improper use.
  31. The robot contains batteries that are only replaceable by skilled persons. To replace the robot’s battery, please contact Customer Service.
  32. If the robot will not be used for a long time, power OFF the robot for storage and unplug the Docking Station.
  33. WARNING: For the purposes of recharging the battery, only use the detachable supply unit DN622.13 provided with the Appliance.
  34. This Appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the Appliance in a safe way and understand the hazards involved. Children shall not play with the Appliance. Cleaning and user maintenance shall not be made by children without supervision. (For EU Countries)

To satisfy RF exposure requirements, a separation distance of 20 cm or more should be maintained between this device and persons during device operation.

To ensure compliance, operations at closer than this distance is not recommended. The antenna used for this transmitter must not be co-located in conjunction with any other antenna or transmitter.

ECOVACS Deebot U2 - Symbol Explain

For EU Countries
For EU Declaration of Conformity information, visit https://www.ecovacs.com/global/compliance

Correct Disposal of this Product
This marking indicates that this product should not be disposed of with other household waste throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To recycle your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can safely recycle this product.

Package Contents

Package Contents

ECOVACS Deebot U2 - Package Contents

Note : Figures and illustrations are for reference only and may differ from actual product appearance. Product design and specifications are subject to changes without notice.

Product Diagram

Robot

ECOVACS Deebot U2 - Product Diagram - Robot

Bottom

ECOVACS Deebot U2 - Product Diagram - Bottom

Dust Bin and Reservoir (Pre-installed)

ECOVACS Deebot U2 - Dust Bin and Reservoir

Docking Station

ECOVACS Deebot U2 - Docking Station

Operating and Programming

Notes Before Cleaning

Tidy up the area to be cleaned by putting furniture, such as chairs, in their proper place.

ECOVACS Deebot U2 - Notes Before Cleaning 1

It may be necessary to place a physical barrier at the edge of a drop to stop the unit from falling over the edge.

ECOVACS Deebot U2 - Notes Before Cleaning 2 ECOVACS Deebot U2 - Notes Before Cleaning 3

Quick Start
  1. Remove Protective Materials ECOVACS Deebot U2 - Remove Protective Materials
  2. Install Side Brushes ECOVACS Deebot U2 - Install Side Brushes
Charging DEEBOT
  1. Docking Station Placement ECOVACS Deebot U2 - Docking Station Placement

  2. Power ON  ECOVACS Deebot U2 - Power ON Note : I = ON, O = OFF
    DEEBOT cannot be charged when being powered OFF.

  3. Charge DEEBOT ECOVACS Deebot U2 - Charge DEEBOT

    • Empty the reservoir and remove the Cleaning Cloth Plate before charging DEEBOT.
    • It is suggested to avoid picking up or moving DEEBOT during the cleaning for DEEBOT to return to charge successfully.
ECOVACS HOME App

To enjoy all available features, it is recommended to control your DEEBOT via the ECOVACS HOME app.

Before you start, make sure that:

  • Your mobile phone is connected to a Wi-Fi network.
  • The 2.4GHz band wireless signal is enabled on your router.
  • The Wi-Fi indicator light on DEEBOT is slowly flashing.

ECOVACS Deebot U2 - ECOVACS HOME App

Google Play or App Store

Wi-Fi Indicator Light

ECOVACS Deebot U2 - Wi-Fi Indicator Light

Tips :
If you have any problems during the Wi-Fi setup process, refer to the Troubleshooting > Wi-Fi Connection section in this manual.

2.5 Operating DEEBOT

During the first cleaning, please supervise DEEBOT and assist it should there be a problem.

  1. Start  ECOVACS Deebot U2 - Start

  2. Start/Pause
    The robot’s Control Panel stops glowing after the robot is paused for a few minutes. Press the AUTO Mode Button on DEEBOT to wake up the robot. ECOVACS Deebot U2 - Start or PauseIf the pause duration is shorter than 10 minutes, DEEBOT will return to finish the cleaning where it left off.

  3. Power OFF

    • If DEEBOT will not be used for a while, fully charge DEEBOT and power OFF before storage. Charge DEEBOT every 1.5 month to prevent battery drain.
    • When DEEBOT is not cleaning, it is recommended to keep DEEBOT powered ON and charging.
Dust Bin & Reservoir

Note :

  1. To prolong the service life of the reservoir, it is recommended to use purified water or softened water.
  2. Please avoid using the mopping system on the carpet.

Add Water

ECOVACS Deebot U2 - Add Water

Install Dust Bin & Reservoir

ECOVACS Deebot U2 - Install Dust Bin & Reservoir

Maintenance

Regular Maintenance

To keep DEEBOT running at peak performance, perform maintenance tasks and replace parts with the following frequencies:

ECOVACS Deebot U2 - Regular Maintenance

Before performing cleaning and maintenance tasks on DEEBOT, turn the robot OFF and unplug the Docking Station. A multi-function Cleaning Tool is provided for easy maintenance. Handle with care, this cleaning tool has sharp edges.

Note : ECOVACS manufactures various replacement parts and fittings. Please contact Customer Service for more information on replacement parts.

Dust Bin & Reservoir

Uninstall the Dust Bin & Reservoir

Reservoir

ECOVACS Deebot U2 - Reservoir

Washable/Reusable Microfiber Cleaning Cloth

Dust Bin

ECOVACS Deebot U2 - Dust Bin

Main Brush & Side Brushes

ECOVACS Deebot U2 - Main Brush & Side Brushes

Other Components

ECOVACS Deebot U2 - Other Components

Troubleshooting

ECOVACS Deebot U2 - Troubleshooting 1 ECOVACS
Deebot U2 - Troubleshooting 2

Wi-Fi Connection

Before Wi-Fi setup, make sure DEEBOT, mobile phone, and Wi-Fi network meet the following requirements.

DEEBOT and Mobile Phone Requirements

  • DEEBOT is fully charged and the power switch of DEEBOT is turned on.
  • Wi-Fi status light slowly flashes.
  • Turn off mobile phone’s cellular data (you can turn it back on after setup).

Wi-Fi Network Requirements

  • You are using a 2.4GHz or 2.4/5 GHz mixed network.
  • Your router supports 802.11b/g/n and IPv4 protocol.
  • Do not use a VPN (Virtual Private Network) or Proxy Server.
  • Do not use a hidden network.
  • WPA and WPA2 using TKIP, PSK, AES/CCMP encryption.
  • WEP EAP (Enterprise Authentication Protocol) is not supported.
  • Use Wi-Fi channels 1-11 in North America and channels 1-13 outside North America (refer to local regulatory agency).
  • If you are using a network extender/repeater, the network name (SSID) and password are the same as your primary network.

Product Specifications

ECOVACS Deebot U2 - Product Specifications

  • Output power of the Wi-Fi module is less than 100mW.
    Note : Technical and design specifications may be changed for continuous product improvement.

Ecovacs Robotics Co., Ltd.
No. 18 You Xiang Road, Wuzhong District, Suzhou City,
Jiangsu Province, P.R.China

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals