Kov SBT300 Bluetooth Headphones Manual

Wireless Entertainment

SBT300

Bluetooth headset User Guide

Thank you for choosing the KOV wireless charging TWS earbud SBT300, it allows you the freedom to make any calls and enjoy the music streaming any time. Please read this user manual carefully also read your device’s user manual attention to those important before using the earbud, and regarding the Bluetooth function, and pay safety and maintenance information.

1. Specifications

*May vary due to user’s operation mode and device settings.

2 . Function key

1. MULTI-FUNCTION KEY(MFB)
2. EARPIECE LED
3. MICROPHONE
4. SPEAKER
5. POWER BANK LED
6. WIRELESS CHARGING LED
7. IN/OUT PORT

3 . Basic Operations

Charging Your SBT300
Prior to using for the first time, the batteries need to be fully charged to prolong the battery life.
Put the earpieces into the charging sank and plug the battery base to a power source, the led will turn on and, if earpiece fully being charged, the led will turn off, if battery base is fully charged, the 4 leds will be stable.

Turning on the earpiece
In OFF MODE, press and hold MFB for about 3 seconds until you hear a short beep and voice prompt “power on”, and the led flashes white, then it will enter into STANDBY MODE.

Turning off the Headset
In ON MODE, press and hold MFB for about 5 seconds until you hear a short beep and voice prompt “power off”, the led flashes red, then it will enter into OFF MODE.
Pairing Your earpieces with a Bluetooth Mobile Phone

1. Ensure both earpieces are off, and the distance to your phone is within 1 meter.

2. Press and hold MFB for about 5 seconds until the led flashes white and red alternately and voice prompt “pairing” as PAIRING MODE, the left and right will be connected automatically with voice prompt, after both earpieces being paired, the left earpiece will enter into PAIRING MODE again, its led flashes fast with a voice prompt “Pairing”, now the TWS earbud readies to connect with your cell phone.

3. Activate the Bluetooth function on the phone; search Bluetooth devices (See the user guide of your phone for instructions).

4. Select “SBT300” from the found devices list of the phone.

5. Enter the passkey “0000” if requested; confirm to pair the earbud with your phone. If successfully paired, the earbud will beep with voice prompt “connected”, The earbud enters into the STANDBY MODE, the led circles white.
   (If the pairing cannot be completed within 3 minutes after the PAIRING MODE has been activated, the earbud will enter into the STANDBY MODE. Repeat above steps to pair again).

6. Ensure the distance between your earbud and phone is within 10 meters and without any obstacles. You can use the earbud freely.

7. If the earbud had paired with your phone but disconnected, it will paired automatically again when turns on within operation range.
   Note: Not all cell phones support this function, some may request reconnection manually.
   Multi-points connection (only one earpiece being used supports this function)
   Follow the above pairing procedure to pair with the first phone, power off after successful pairing, repeat pairing procedure to pair the second phone, then power off the earbud. Power on the earbud into standby mode, it will automatically recognize and connect to both phones

Answering/Ending a Call
Press left MFB once or from your cell phone
Rejecting a Call
Press and hold left MFB for 2 seconds or from your cell phone
Voice Dialing
In STANDBY MODE, press and hold left MFB and say the voice tag as soon as you hear prompt (ensure your phone supports voice dialing function, and you have recorded the voice tag into your phone.
See the user guide of your phone for instructions).
Last Number Redialing
Double Press the left MFB under standby mode or from your cell phone

Adjusting Volume
Please adjust volume from your cell phone
Play/Pause
Press any MFB once for music playing or pause, or control from your cell phone’s APP.
Next/Previous song
Please control from your cell phone’s APP.
Disconnecting
To disconnect the paired earbud from your phone, please turn off the headset or disconnect the headset from the Bluetooth menu of your phone.
Note
Due to the power consumption difference, when the Left earbud power drains, the right one may remain power, it is normal. You now can pair the right one to your phone for music playing and phone talk.
Power bank operation
Charge your power bank
Connect your battery base to a power source to charge your power bank.
Charge your digital device
Use offered cable and adapter to charge you devices.
Additional Statements
SBT300 is compliant with the specified Bluetooth version. It does not guarantee the compatibility of all functions on every Bluetooth-enabled device. Please check your device’s user manual for compatibility and functionality.
The surrounding affects much to the wireless connection, if the connection becomes weak in some specific surroundings, it does not mean the earbud has quality issues.
The above operations may vary due to different devices.
The manufacturer reserves the right to final explanation of all the above statements

Kov SBT300 Bluetooth Headphones Manual

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>