hp 9020e Series All-In-One Printer User Guide
- June 4, 2024
- HP
Table of Contents
hp 9020e Series All-In-One Printer
INSTALLATION
-
Remove all tape and packaging material.
-
Plug in to automatically power on. Select language and country/region.
-
Open the front door and then lift the carriage access door by the scanner lid. Unpack cartridges.
-
Insert each cartridge securely into the indicated slot. Close both doors.
Note: Make sure to use the cartridges provided with the printer for setup.
-
Open the paper tray. Slide out the front length guide, remove the cardboard, and slide out the width guides. Load a Letter or A4 paper and adjust the guides. Close the tray and pull open the output tray extender.
-
Use the control panel to print and scan the alignment page.
DOWNLOAD APP
- Install the required HP Smart software from 123.hp.com or your app store on a computer or mobile device.
CONNECT
- Follow the instructions in HP Smart to connect the printer to a network and activate HP+ features.
If connecting the printer to Wi-Fi, your computer or mobile device must be near the printer during the setup. See Reference Guide for Wi-Fi troubleshooting and tips.
Get help with setup
Find setup information and videos online.
hp.com/support/printer-setup
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>