SMUG C-2193 Armless Home Office Desk Chair Instruction Manual
- June 1, 2024
- SMUG
Table of Contents
SMUG C-2193 Armless Home Office Desk Chair
Specifications
- Model: C-2193
Package List
- (A)*1 Backrest
- (B)*1 Seat
- (C)*1 Back bar
- (D)*1 Mechanism
- (E)*1 Gas Lift
- (F)*1 Base
- (G)*5 Legs
- (H)*5 Casters
Assembly
- Turn the Base (F) upside down, insert the Legs (G)5 into the Base one by one. Use Wrench (M) to secure both with Bolts (K)10.
- Press Casters (H)5 into the holes at the end of Legs (G)5.
- Insert the Gas Lift (E) into the Base (F).
- Using Wrench (M), install Back bar (C) to the Backrest(A) with Bolts (L)2 and (J)4.
- Turn the Seat (B) upside down. Using Wrench (M), install Mechanism (D) to the Seat with Bolts(I)*4.
- Attach Backrest with back bar to the Seat (B) with Bolts (J)*4.
- Align the hole on Mechanism (D) with Gas Lift (E), and press the Chair down until it is fully secured.
- Finish the installation.
Product Usage
Before using the chai, check to ensure that all bolts are fully tightened.
Lubricate all parts and tighten all bolts every 6 months or whenever needed.
To Deodorize Leather
Leave the chair in a shady outside area for 1-2 days.
Safety Information
- Sit in the center of the chair, with your back to the backrest.
- Do not sit at the front edge of the chair.
- Do not stand on the chair.
- Do not use the chair with more than one person.
- Do not push the chair around when a person is sitting in
- Do not push down on the backrest when a person is reclined.
- Do not place all your weight on only the backrest.
Contact Information:
Email: [email protected]
Phone: (909)637-7665 | (909)637-7593
Assembly Video:
FAQ
Q: How often should I tighten the bolts on the chair?
A: It is recommended to re-tighten the bolts every 6 months using the
enclosed allen key provided. Avoid using an electric drill as it can damage
the chair. Please re-tighten bolts manually.
INSTRUCTION MANUAL
https://hlinstallationvideos.s3.amazonaws.com/C-2193+Lounge+Chair.mp4
[email protected]
(909)637-7665 | (909)637-7593
Package List
Assembly Instruction
-
Turn the Base (F) upside down, insert the Legs (G)5 into the Base one by one. Use Wrench (M), secure both with Bolts (K)10.
-
Press Casters (H)5 into the holes at the end of Legs (G)5.
-
Insert the Gas Lift (E) into the Base (F).
-
Using Wrench (M), install Back bar (C)to the Backrest(A) with Bolts (L) *2
-
Turn the Seat (B) upside down . Using Wrench (M), install Mechanism (D) to the Seat with Bolts (I) *4.
-
Using Wrench (M), attach Backrest with back bar to the Seat (B) with Bolts (J) *4.
-
Align the hole on Mechanism (D) with Gas Lift (E) , and press the Chair down until it is fully secured.
-
Finish the installation.
Instructions For Use
CAUTION
-
Before using the chair, check to ensure that all bolts are fully tightened.
-
Lubricate all parts and tighten all bolts every 6 months or whenever needed.
-
To deodorize the leather leave the chair in a shady outside for 1-2 days.
-
For longer use
Re-tighten bolts every 6 months by using the enclosed allen-key.
*Using an electric drill can damage the chair. Please re-tighten bolts manually.
Safety Information
