SMUG 4024 Electric Standing Desk With Memory Preset Instruction Manual

SMUG 4024 Electric Standing Desk With Memory Preset

Product Information

The Electric Standing Desk is a height-adjustable desk designed to provide ergonomic support and flexibility in the workplace or home office. It allows users to easily switch between sitting and standing positions, promoting better posture and reducing the risks associated with prolonged sitting.

Specifications

• Height Adjustment Range:   28.7”–48” (73–122cm)
• Power Input:  100V–240V
• Max. Speed: 24mm/s
• Operating Noise: Low noise
• Max. Load: Recommended maximum load capacity

Product Usage Instructions

Supplied Parts and Hardware

Before attaching the transmission rod, measure the heights of the two desk legs to see if they are set at the same level. If not, insert the transmission rod into the hole in the right leg. Turn the rod to adjust the right leg so it’s level with the left leg. Turn the rod clockwise to lower the right leg or anti-clockwise to raise it.

Assembling and Attaching the Desktop

• Secure the desktop panels with the connectors. Then attach the hooks and controller to the desktop.
• Place rubber pads on the desktop screw holes.
• Attach the frame to the desktop.

Installing the Cable Hole Covers

Connecting the Cables

Setting the Desk Legs to the Same Height

To adjust the desk height, locate the control panel or buttons provided. Follow the instructions in the user manual to raise or lower the desk to your desired height. Take breaks and switch between sitting and standing positions periodically for optimal comfort.

Attaching the Leg Bases

Using the Controller

• Raise the Desk
  Press the button to raise the desk continuously until it reaches the highest position or the button is released.

• Lower the Desk
  Press the button to lower the desk continuously until it reaches the lowest position or the button is released.

• Select Height Setting 1
  Press the button, and the desk will move to the height that was previously set for that button.

• Select Height Setting 2
  Press the button, and the desk will move to the height that was previously set for that button.

• Select Height Setting 3
  Press the button, and the desk will move to the height that was previously set for that button.

• Save Current Height Setting
  Short-press the button, and the screen will show. ‘S-’ Press the 1,2, or 3 button to save the current height setting to that button. When you press  the 1, 3 ,2 or button, the desk will move to the height that was previously set for that button. Any button-press will stop the desk.

Settings

• Reset
  Press and hold the button until ‘rst’ is displayed. Continue holding until the desk goes down to its lowest level and comes back up slightly. Release the button, and reset is complete. If the button is released during the reset procedure, reset will stop. The desk won’t work until reset is done correctly.

• Child Lock
  Press and hold the and buttons together for 5 seconds to turn child lock on. The screen will show ‘LOC’ and the buttons will be disabled.

• Settings Menu
  Press and hold the S button for 3 seconds, “S–” will be displayed. Then short- press the S button to enter setup mode. Short-press the ↑ or ↓ button to navigate through the menu or adjust the settings. Short-press the S button to enter next menu or save the changes. Short-press the 1 button to return to the previous menu. If there is no button-press for 20 seconds, it will exit setting mode.

• Power-Saving Mode
  The screen will turn off if there is no button press for a minute. Any button- press will turn the screen on again.

Protection Mode Error Codes

Technical Support

(909)637-7665 | (909)637-7593
Other Info
HJ-Customer-Service@outlook.com
Thank you for choosing this product. We strive to provide you with the best quality products and service in the industry. Should you have any issues, please don’t hesitate to contact us.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>