Smug 3718 Office Chair Computer Gaming with Arms Instruction Manual
- June 14, 2024
- SMUG
Table of Contents
Smug 3718 Office Chair Computer Gaming with Arms
Product Information
The product is a chair, model C-3718, designed for comfortable seating. It comes with various components including a backrest, seat, armrests, mechanism, gas lift, base, legs, casters, bolts, and a wrench. The chair is suitable for indoor use and is made of leather.
Product Usage Instructions
- Deodorizing the Leather: To deodorize the leather, leave the chair in a shady outdoor area for 1-2 days.
- Longer Use: Re-tighten bolts every 6 months using the enclosed allen-key. Do not use an electric drill as it can damage the chair. Please re-tighten bolts manually.
- Safety Information:
- Sit in the center of the chair with your back to the backrest.
- Do not sit at the front edge of the chair.
- Do not stand on the chair.
- Do not use the chair with more than one person.
- Do not push the chair around when a person is sitting in it.
- Do not push down on the backrest when a person is reclined.
- Do not place all your weight on only the backrest.
- Assembly Instruction:
- Turn the Base (F) upside down and insert the Legs (G)5 into the Base one by one. Use Wrench (M) to secure both with Bolts (K)10.
- Press Casters (H)5 into the holes at the end of Legs (G)5.
- Insert the Gas Lift (E) into the Base (F).
- Using Wrench (M), install Armrests (C)x1Lx1R to both sides of the Backrest (A) with Bolts (I)*4.
- Using Wrench (M), 100% tighten the previously installed Bolts (I)*4 on the Armrests (C)x1Lx1R. Align the hole on Mechanism (D) with Gas Lift (E), and press the Chair down until it is fully secured.
- Finish the installation.
- Instructions For Use:
- Turn the Seat (B) upside down. Using Wrench (M), install Armrests (C)x1Lx1R to the Seat with Bolts (J)*6.
- Using Wrench (M), attach Mechanism (D) to the Seat (B) with Bolts (L)*4.
- Before using the chair, check to ensure that all bolts are fully tightened. Lubricate all parts and tighten all bolts every 6 months or whenever needed.
- To deodorize the leather leave the chair in a shady outside for 1-2 days.
- For longer use
- Re-tighten bolts every 6 months by using the enclosed allen-key.
- *Using an electric drill can damage the chair. Please re-tighten bolts manually.
Safety Information
- Sit in the center of the chair, with your back to the backrest
- Do not sit at the front edge of the chair
- Do not stand on the chair
- Do not use the chair with more than one person
- Do not push the chair around when a person is sitting in it
- Do not push down on the backrest when a person is reclined
- Do not place all your weight on only the backrest
Package List
Assembly Instruction
-
Turn the Base (F) upside down, insert the Legs (G)5 into the Base one by one. Use Wrench (M), secure both with Bolts (K)10.
-
Press Casters (H)5 into the holes at the end of Legs (G)5.
-
Insert the Gas Lift (E) into the Base (F).
-
Using Wrench (M), install Armrests (C)x1Lx1R to both sides of the Backrest (A) with Bolts (I)*4.
NOTE: -
Bolts (I) are only tightened 50%.
-
Armrests (C)x1Lx1R are marked with “L” (Left) and “R” (Right) to show which side they should be installed.
-
Turn the Seat (B) upside down . Using Wrench (M), install Armrests (C)x1Lx1R to the Seat with Bolts (J)*6.
NOTE: The Seat (B) is marked with “FRONT”, please make sure the installation direction is correct. -
Using Wrench (M), attach Mechanism (D) to the Seat (B) with Bolts (L)*4.
NOTE: Make sure the “FRONT” direction of Mechanism (D) and Seat (B) are the same.
-
Using Wrench (M), 100% tighten the previously installed Bolts (I)*4 on the Armrests (C)x1Lx1R. Align the hole on Mechanism (D) with Gas Lift (E), and press the Chair down until it is fully secured.
-
Finish the installation.
Instructions For Use
CAUTION:
-
- Before using the chair, check to ensure that all bolts are fully tightened.
-
- Lubricate all parts and tighten all bolts every 6 months or whenever needed.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>