HONOR BVL-N49 Support Smart Phone User Guide
- June 1, 2024
- Honor
Table of Contents
HONOR BVL-N49 Support Smart Phone
Specifications:
- Model: BVL-N49
- RF Exposure: 1.00 W/kg (ear), 0.54 W/kg (body)
- Compliance: Innovation, Science and Economic Development Canada
Product Information:
The BVL-N49 is a mobile device featuring a fingerprint sensor on the screen,
USB Type-C port, headphone jack, and dual SIM card support. It complies with
RF exposure regulations and provides various safety features for user
protection.
Product Usage Instructions
Know Your Device:
Familiarize yourself with the basic operations of the device including volume
control, power button, card slot, and in-screen fingerprint sensor.
Getting Started:
Follow the instructions provided with the device to set it up properly. Use
the eject pin included to insert SIM cards correctly into the card tray.
SIM Card Management:
Select the default mobile data card and calling card as needed.
Refer to the pre-installed Tips app for more details.
Safety Information:
Read all safety information carefully before using the device to ensure safe
operation. Avoid listening at high volume levels for extended periods to
prevent hearing damage.
Disposal and Recycling Information:
Learn how to properly dispose of and recycle the device when it reaches the
end of its life cycle.
RF Exposure Information:
Limit device usage or use a hands-free kit to reduce exposure.
Keep the device away from your body to meet distance requirements for RF
compliance.
FAQ:
Q: How can I manage my SIM cards on the device?
A: You can manage your SIM cards by selecting the default mobile data
card and calling card as needed. Refer to the pre-installed Tips app for
detailed instructions.
Q: What should I do if I encounter problems while using the device?
A: If you experience any issues with the device, seek help from the
available resources provided in the manual or contact customer support for
assistance.
Know Your Device
Before using the device, familiarize yourself with its basic operations.
- To power on your device, press and hold the power button until the screen turns on.
- To power off your device, press and hold the power button, and then touch .
- To restart your device, press and hold the power button, and then touch .
- Press and hold the Power and Volume down buttons for more than 10 seconds to force restart your device.
Volume button | Power button | ||
---|---|---|---|
Card slot | USB Type-C port/ Headset jack | ||
In-screen fingerprint |
- Please keep the NFC area close to other devices or objects while using the NFC function.
- Check out the pre-installed Tips app and master all the great features on your device.
Getting Started
- Be careful not to scratch your device or hurt yourself when using the eject pin.
- Store the eject pin out of the reach of children to prevent accidental swallowing or injury.
- Do not use cut or modified SIM cards with your device as these may not be recognized and could damage the card tray (slot).
- If your SIM card does not match your device,please contact your carrier.
Follow the instructions in the following figures to set up your device. Please use the eject pin included.
Ensure that the card is correctly aligned and its notch is first inserted into the card tray.
Single-SIM card:
Dual-SIM card:
SIM Card Management
Select the default mobile data card and calling card as needed. For details, check out the pre-installed Tips app.
- 5G and 4G service depends on the support of your network carrier and its deployment of relevant services. Please contact your carrier to activate 5G or 4G service.
- If this guide is inconsistent with the description on the official website, the latter prevails.
For More Information
If you encounter any problems while using your device, you can obtain help from the following resources:
- Visit https://www.hihonor.com to view device information and other information.
- Visit https://www.hihonor.com/global/support/ for the most up-to-date contact information for your country or region.
- Go to Settings and enter the following keywords in the search box to view the corresponding information. E.g. Legal information, Safety information, Authentication info, Regulatory information.
- Depending on the region or model, some devices are required to receive approval from the Innovation, Science and Economic Development Canada (ISED).
If your device is approved by the ISED, you can go to Settings and touch System & updates > Regulatory information to view IC ID. If your device does not have an IC ID, the device has not been authorized for sale in the Canada or its territories and may only be brought to the Canada for the owner’s personal use.
Safety Information
Please read all of the safety information carefully before using your device to ensure its safe and proper operation and to learn how to dispose of your device properly.
Operation and safety
-
To prevent possible hearing damage, do not listen at high volume levels for long periods.
-
Using an unapproved or incompatible power adapter,charger, or battery may damage your device, shorten its lifespan, or cause a fire, explosion, or other hazards.
-
Ideal operating temperatures are 0 °C to 35 °C. Ideal storage temperatures are -20 °C to +45 °C.
-
Pacemaker manufacturers recommend that a minimum distance of 15 cm be maintained between a device and a pacemaker to prevent potential interference with the pacemaker. If using a pacemaker, hold the device on the side opposite the pacemaker and do not carry the device in your front pocket.
-
Keep the device and the battery away from excessive heat and direct sunlight. Do not place them on or in heating devices, such as microwave ovens, stoves, or radiators.
-
Observe local laws and regulations while using the device. To reduce the risk of accidents, do not use your wireless device while driving.
-
While flying in an aircraft or immediately before boarding, only use your device according to instructions provided. Use of a wireless device in an aircraft may disrupt wireless networks, present a hazard to aircraft operation, or be illegal.
-
In order to avoid damaging the internal circuit of the device or charger, do not use the device in a dusty,damp, or dirty place, or near a magnetic field.
-
When charging the device, make sure the power adapter is plugged into a socket near the devices and is easily accessible.
-
The power adapter can supply a rated output of 20V/5A. The phone supports a rated input of 20V/4A.
-
Unplug the charger from electrical outlets and the device when not in use.
-
Do not use, store or transport the device where flammables or explosives are stored (in a gas station, oil depot, or chemical plant, for example). Using your device in these environments increases the risk of explosion or fire.
-
Keep the battery away from fire, and do not disassemble, modify, throw, or squeeze it. Do not insert foreign objects into it, submerge it in water or other liquids, or expose it to external force or pressure, as this may cause the battery to leak, overheat, catch fire, or even explode.
-
Dispose of this device, the battery, and accessories according to local regulations. They should not be disposed of in normal household waste. Improper battery use may lead to fire, explosion, or other hazards.
-
This device contains a built-in battery. Do not attempt to replace the battery by yourself.
Otherwise, the device may not run properly or it may damage the battery. For your personal safety and to ensure that your device runs properly, you are strongly advised to contact an authorized service center for a replacement. -
Your device has been tested in a controlled environment and certified to be splash, water, and dust resistant in specific situations (meets requirements of classification IP68 as described by the international standard IEC 60529). Splash, water,and dust resistance are not permanent conditions and resistance might decrease as a result of normal wear. Do not charge your device in wet conditions.
Visit https://www.hihonor.com/global/support/ for detailed description of this function. -
Reverse wireless charging works at maximum power when the device battery level is kept above 90% and a power adapter that supports HONOR SCP charging protocol, e.g., a HONOR 100W SuperCharge adapter or HONOR 66W SuperCharge adapter, is used with the standard HONOR charging cable.
Disposal and Recycling Information
The symbol on the product, battery, literature, or packaging means that the products and batteries should be taken to separate waste collection points designated by local authorities at the end of the lifespan. This will ensure that EEE waste is recycled and treated in a manner that conserves valuable materials and protects human health and the environment.
For more information, please contact your local authorities, retailer, or household waste disposal service or visit the website https://www.hihonor.com/.
RF Exposure Information
The World Health Organization has stated that exposure can be reduced by
limiting your usage or simply using a hands-free kit to keep the device away
from the head and body.
Ensure that the device accessories, such as a device case and device holster,
are not composed of metal components. Keep the device away from your body to
meet the distance requirement.
For the countries that adopted the SAR limit 1.6 W/kg over 1 gram of tissue.
The device complies with RF specifications when used near your ear or at a
distance of 1.50 cm from your body. The highest SAR value reported to the ISED
for this device type when using it at the ear is
And when properly worn on the body is
Innovation, Science and Economic Development Canada compliance
Body worn operation
The device complies with RF specifications when used near your ear or at a
distance of 1.50 cm from your body. Ensure that the device accessories, such
as a device case and device holster, are not composed of metal components.
Keep the device away from your body to meet the distance requirement.
ISED Statement
This device complies with CAN ICES-003 (B)/NMB-003(B).
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
- This device may not cause interference.
- This device must accept any interference, including interference that may cause undesired operation of the device.
Restrictions in the 5 GHz band:
The device for operation in the band 5150–5250 MHz is only for indoor use to
reduce the potential for harmful interference to co-channel mobile satellite
systems.
Mexico Compliance:(This section is only applicable for Mexico.)
The operation of this device is subjected to the following two conditions: (1)
This device may not cause harmful interferences; and (2) this device must
accept any interferences, including those that may cause an undesired
operation.
The device IMEI can be obtained by dialing *#06#.
This equipment does not support the FM radio function.
The device has the Cellular Broadcasting Service enabled and activated, you
can configure the alert messages through the following menu:
Settings > Sounds & vibration > More settings >Wireless Emergency Alerts.
For information about the IFT certification, visit
https://www.hihonor.com/global/legal/certification/.
Legal Notice
Trademarks and Permissions
Android is a trademark of Google LLC.
LTE is a trademark of ETSI.
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG, Inc. and any use of such marks by Honor Device Co., Ltd. is
under license.
Wi-Fi®, the Wi-Fi CERTIFIED logo, and the Wi-Fi logo are trademarks of Wi-Fi
Alliance.
For DTS patents, see http://patents.dts.com.
Manufactured under license from DTS Licensing Limited. DTS, DTS:X, DTS:X
Ultra, and the DTS:X logo are registered trademarks or trademarks of DTS, Inc.
in the United States and other countries. © 2021 DTS, Inc.
ALL RIGHTS RESERVED.
Copyright © Honor Device Co., Ltd. 2024. All rights reserved.
ALL PICTURES AND ILLUSTRATIONS IN THIS GUIDE,INCLUDING BUT NOT LIMITED TO THE
DEVICE COLOR,SIZE, AND DISPLAY CONTENT, ARE FOR YOUR REFERENCE ONLY. THE
ACTUAL DEVICE MAY VARY.
NOTHING IN THIS GUIDE CONSTITUTES A WARRANTY OF ANY KIND, EXPRESS OR IMPLIED.
Privacy Policy
To better understand how we protect your personal information, please see the
privacy policy at https://www.hihonor.com/privacy-policy/worldwide/.
References
- Patents - DTS
- HONOR
- HONOR
- HONOR EU Declaration of Conformity - HONOR CE DOC - HONOR Global
- HONOR Support - Customer Service | HONOR Official Site Global
- HONOR Privacy Policy
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>