ingenuity Happy Belly 16854-MEES Rock to Bounce Massage Seat Owner’s Manual

ingenuity Happy Belly 16854-MEES Rock to Bounce Massage Seat

Product Specifications:

• Brand: Happy BellyTM
• Model: Rock-to-Bounce Massage Seat – Chambray
• Includes: Seat pad with frame, Massage unit, Control module,Bolster, Toy bar with toy, Carry bag
• Battery Requirement: (3) size C/LR14 (1.5V) alkaline batteries (not included)

Product Usage Instructions

Description:
The Happy BellyTM Rock-to-Bounce Massage Seat includes a seat pad with frame, massage unit, control module, bolster, toy bar with toy, and carry bag.

Care and Cleaning:
Follow the care and cleaning instructions provided in the manual to ensure the longevity of the product. Avoid using harsh chemicals that may damage the materials.

Battery Information:
The control module requires (3) size C/LR14 (1.5V) alkaline batteries. Make sure to follow the battery guidelines to prevent leakage or rupture. Contact local authorities for recycling information.

Installation:
Insert the required batteries into the control module as per the provided instructions. Ensure proper installation to avoid damage to the device.

Usage:
Always use the product with the bolster provided. Never use the product without the bolster to ensure safety and proper functionality.

FAQ:

Q: Can I use the product without the bolster?
A: No, it is important to always use the product with the bolster provided for safety reasons.

Q: What type of batteries does the control module require?
A: The control module requires (3) size C/LR14 (1.5V) alkaline batteries, which are not included in the package.

IMPORTANT! READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING

When used in bouncer mode:
TO PREVENT FALLS AND SUFFOCATION:

• ALWAYS use restraints and adjust to fit snugly.
• STOP using bouncer when baby starts trying to sit up or has reached 20 lb (9 kg), whichever comes first.

When used in rocker mode:
FALL HAZARD: Children have suffered head injuries falling from rockers.

• ALWAYS use the restraint system. Adjust to fit snugly.
• STOP using rocker when baby starts trying to sit up or has reached 20 lb (9 kg), whichever comes first.

When used in any mode:

• FALL HAZARD: Children have suffered head injuries, including skull fractures, falling while in and from seats.

• NEVER leave the child unattended.

• It is dangerous to use this product on an elevated surface (e.g. a table). ONLY use on the floor.

• DO NOT move or lift this product with the baby inside it. Never lift product using a toy bar as a handle.

• DO NOT place this product near a window as it can be used as step by the child and cause the child to fall out of the window.

• Be aware of the risk of open fires and other sources of strong heat in the vicinity of the product.

• DO NOT place this product near a window where cords from blinds or curtains could strangle a child.
  SUFFOCATION HAZARD: Babies have suffocated when products tipped over on soft surfaces and/or when products have been used as a sleep product.

• NEVER use on a bed, sofa, cushion, or other soft surface.

• Stay near and watch baby during use. This product is not safe for sleep or unsupervised use. If baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.

• Never let the child sleep in this product.
  TO PREVENT FALLS AND SUFFOCATION:

• NEVER use as an infant carrier for automobile or airline travel.

• NEVER attach any additional strings or straps to product or toy bar.

• In cradle mode, do not use the reclined cradle once your child can sit unaided.

IMPORTANT

• Adult assembly required.
• Please read all instructions before assembly and use of the product.
• Care should be taken in unpacking and assembly.
• Examine product frequently for damaged, missing, or loose parts.
• DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
• This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.

Care and Cleaning

Carry bag, Bolster – Remove from frame. Machine wash with cold water,gentle cycle. No bleach. Tumble dry, using low heat.

Seat pad/Toy bar and toys – Wipe clean with a damp cloth and mild soap.
Air dry. Do not immerse in water.

Frame – Wipe the frame with soft, clean cloth and mild soap.

Battery Information

The control module requires (3) size C/LR14 (1.5V) alkaline batteries (not included).

CAUTION: Follow the battery guidelines in this section. Otherwise, battery life may be shortened or the batteries may leak or rupture. To prevent battery leaks, which can burn skin and eyes:

• Always keep batteries away from children.
• Never mix old and new batteries, or batteries of different brands or types.
• Always replace the entire set of batteries at one time.
• Do not mix alkaline, standard, or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Install the batteries so that the polarity of each one matches the markings in the battery compartment.
• Do not short-circuit the batteries.
• Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
• Remove exhausted batteries from the battery compartment.
• Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Dispose of used batteries immediately.
• Please use the correct disposal method for batteries.
• Remove batteries before putting the product into storage for a prolonged period of time.
• Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
• Do not dispose of product or batteries in fire, batteries may explode or leak.
  This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.

Parts List and Drawing

not included

INSTRUCTION

ASSEMBLY

Using the Seat Restraint

Rocker Mode

Bouncer Mode

Warning: Ensure front and back feet are fully extended out for bouncer mode.

Removing the Bolster

Storage

Control Module:
The Control Module has 6 capacitive touch controls, including Power, Massage, Melody, Volume, Vibration and Nature Sounds.

Power Switch:
Touch the Power Switch to power the seat control module

Massage:
Touch the Massage switch to toggle the Massager “On” and “Off”. Auto-shutoff occurs after about 3 minutes.

Music:
Touch the Music switch to alternate between music and mute settings. Auto- shutoff occurs after about 15 minutes.

Volume Control:
Touch the Volume Control switch as needed to turn off or adjust the volume for music and nature sounds.

Vibration:
Touch the Vibration switch to toggle the Vibration Motor “On” and “Off”. Auto- shutoff occurs after about 15 minutes.

Nature Sounds:
Touch the Nature Sounds switch to alternate between natural sounds and mute settings. Auto-shutoff occurs after about 15 minutes.

FCC Statement / CAN ICES-3 (B) / NMB-3(B)

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Find us on Facebook and Instagram @ingenuitybaby

Toys • Activity Gyms • Bouncers • Rockers • Swings Activity Centers • Walkers • Door Jumpers

ingenuitybaby.com

References

• Ingenuity™ – Kids2, LLC
• Kids2 Contact Us – Kids2, LLC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>