ingenuity 10986-EES Rocking Seat Bell Teddy Owner’s Manual

ingenuity 10986-EES Rocking Seat Bell Teddy

WARNING

• FALL HAZARD : Children have suffered head injuries falling from rockers.
• NEVER leave the child unattended.
• ALWAYS use the restraint system. Adjust to fit snugly.
• Stop using restraint system once the child tries to stand up and is able to climb in and out of the rocker.
• DO NOT move or lift this product with the baby inside it. Never lift product using a toy bar as a handle.
• NEVER place a child over 40 lb (18 kg) in the product.
• The reclined position is only for children who cannot sit upright unassisted (until 20 lb or 9 kg).
• Stop using reclined position when baby starts trying to sit up.
• The upright position is only for children who have developed enough upper body control to sit up without tipping forward
• NEVER use this product on an elevated surface (e.g. a table). ALWAYS use on the floor.
• DO NOT place this product near a window as it can be used as step by the child and cause the child to fall out of the window.
• Be aware of the risk of open fires and other sources of strong heat in the vicinity of the product.
• DO NOT place this product near a window where cords from blinds or curtains could strangle a child.
• SUFFOCATION HAZARD: Babies have suffocated when seats tipped over on soft surfaces.
• NEVER use on a bed, sofa, cushion, or other soft surface.
• Stay near and watch baby during use. This product is not safe for sleep or unsupervised use. If baby falls asleep, remove baby as soon as possible and place baby on a firm, flat sleep surface such as a crib or bassinet.
• Never let the child sleep in this product.
• NEVER attach any additional strings or straps to product or toy bar.
• NEVER use as an infant carrier or for automobile or airline travel.

IMPORTANT

• Adult assembly required.
• Please read all instructions before assembly and use of the product.
• Care should be taken in unpacking and assembly.
• Examine product frequently for damaged, missing, or loose parts.
• DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
• This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.

Care and Cleaning

Seat pad/Bolster/Headrest – Remove from frame. Fasten buckles on seat restraint and seat pad. Fasten all hook-and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, using low heat.
Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry.
Do not immerse in water.
Frame – Wipe the metal frame with soft, clean cloth and mild soap.

Battery Information

The Music/vibration Unit requires (3) size C/LR14 (1.5V) alkaline batteries (not included).
CAUTION : Follow the battery guidelines in this section. Otherwise, battery life may be shortened or the batteries may leak or rupture. To prevent battery leaks, which can burn skin and eyes:

• Always keep batteries away from children.
• Never mix old and new batteries, or batteries of different brands or types.
• Always replace the entire set of batteries at one time.
• Do not mix alkaline, standard, or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Install the batteries so that the polarity of each one matches the markings in the battery compartment.
• Do not short-circuit the batteries.
• Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
• Remove exhausted batteries from the battery compartment.
• Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Dispose of used batteries immediately.
• Please use the correct disposal method for batteries.
• Remove batteries before putting the product into storage for a prolonged period of time.
• Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
• Do not dispose of product or batteries in fire, batteries may explode or leak.

This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.

FCC Statement / CAN ICES-3 (B) / NMB-3(B)

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:
1 this device may not cause harmful interference, and
2 this device must accept any interference received, including interference that may cause undesired operation.

WARNING : Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Parts List and Drawing

Description
1| (1)| Left rocker runner
2| (1)| Right rocker runner
3| (1)| Rocker rear assembly
4| (1)| Seat bottom rest assembly
5| (1)| Seat back rest assembly
6| (1)| Seat pad
7| (1)| Bolster
8| (1)| Headrest
9| (1)| Toy bar with toys

Using the Seat Restraint

Using the Recline Function

Adjusting the Kickstand

Using the Music/vibration Unit

• Power: Press the Power button to turn ON/OFF the music/vibration unit. The power LED illuminates and music/vibration functions are available. After 25 minutes, the unit will stop automatically (time out). When the Power button is used to turn OFF the unit, unit functions are no longer active.
• Nature Sounds: Press the Nature Sounds button to alternate between nature sounds and mute settings. Nature sounds play for approximately 25 minutes before time out.
• Music : Press the Music button to alternate between music and mute settings. Music plays for approximately 25 minutes before time out.
• Volume : Press the Volume button to alternate between Low, Medium, and High volume settings.
• Vibration : Press the Vibration button to turn ON/OFF the vibration function. Vibration functions for approximately 25 minutes before time out.

Storage and Travel

Find us on Facebook and Instagram @ingenuitybaby

ingenuitybaby.com

References

• Ingenuity™ – Kids2, LLC
• Kids2 Contact Us – Kids2, LLC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>