ingenuity 11200-ES Inlighten Bouncer Twinkle Tails User Manual

ingenuity 11200-ES Inlighten Bouncer Twinkle Tails

Product Information

Specifications

• Model: 11200-ES
• Product Name: InLighten BouncerTM – Twinkle TailsTM
• Website: ingenuitybaby.com
• Battery Requirement: (3) size C/LR14 (1.5V) alkaline batteries (not included)

Product Usage Instructions

Battery Information
The Control Unit requires (3) size C/LR14 (1.5V) alkaline batteries (not included). Follow the guidelines below to ensure proper battery usage:

1. Do not mix old and new batteries or different types of batteries.
2. Ensure batteries are inserted according to the correct polarity (+/-).
3. To prevent leaks, remove batteries if the product will not be used for an extended period.

FCC Statement
This device complies with Part 15 of the FCC rules. Ensure the following conditions are met:

1. The device should not cause harmful interference.
2. The device must accept any interference received.

Product Description
The product includes the following components:

• (2) Base frame tube
• (1) Left hub with wire upright
• (1) Right hub with wire upright

Lights
The product features lights for visual stimulation. Use the control unit to adjust the lighting settings.

Using the Control Unit
Follow these steps to use the control unit:

1. Ensure the batteries are correctly inserted.
2. Press the power button to activate the bouncer.

Volume, Music, Vibration, Nature Sounds
The control unit allows you to adjust volume, play music, activate vibration, and play nature sounds for different sensory experiences.

Power
The power button controls the operation of the bouncer. Ensure it is turned off when not in use to conserve battery life.

FAQ

• Q: What should I do if the product is not functioning correctly?
  A: Check the battery compartment for proper installation and cleanliness. Replace batteries if necessary. Contact customer support for further assistance.

• Q: Can I wash the seat pad of the bouncer?
  A: Refer to the care instructions provided in the manual for cleaning the seat pad. Typically, it can be removed and washed according to specific guidelines.

IMPORTANT SAFETY INSTRUCTIONS

IMPORTANT!
READ CAREFULLY AND KEEP FOR FUTURE REFERENCE

WARNING

FALL HAZARD:
Babies have suffered skull fractures falling while in and from bouncers when not used properly.

• NEVER leave the child unattended.
• Use the bouncer ONLY on the floor.
• NEVER use it on an elevated surface. Only use on the floor.
• NEVER lift or carry a baby in the bouncer.
• NEVER lift the bouncer using a toy bar as a handle. SUFFOCATION HAZARD: Babies suffocate when bouncers are tipped over on soft surfaces and/or when bouncers have been used as a sleep product.
• NEVER use on a bed, sofa, cushion, or other soft surface.
• Stay near and watch the baby during use. This product is not safe for sleep or unsupervised use. If the baby falls asleep, remove the baby as soon as possible and place the baby on a firm, flat sleep surface such as a crib or bassinet.

TO PREVENT FALLS AND SUFFOCATION:

• ALWAYS use restraints and adjust them to fit snugly.
• STOP using bouncer when baby starts trying to sit up or has reached 20 lb (9 kg), whichever comes first.
• Never let the child sleep in this product.
• NEVER use as an infant carrier for automobile or airline travel.
• NEVER attach any additional strings or straps to the product or toy bar.

IMPORTANT

• Adult assembly required.
• Please read all instructions before assembly and use of the product.
• Care should be taken in unpacking and assembly.
• Examine the product frequently for damaged, missing, or loose parts.
• DO NOT use if any parts are missing, damaged, or broken.
• Contact Kids2 for replacement parts and instructions if needed. Never substitute parts.
• This product does not replace a cot or a crib. Should the child fall asleep, then it should be placed in a suitable cot or crib.

Care and Cleaning

• Seat pad and bolster – Remove from frame. Fasten the buckles on the seat restraint and seat pad. Fasten all hook-and-loop patches to the corresponding patch. Machine wash with cold water, gentle cycle. No bleach. Tumble dry, using low heat.
• Toy bar and toys – Wipe clean with a damp cloth and mild soap. Air dry. Do not immerse in water.
• Frame – Wipe the metal frame with a soft, clean cloth and mild soap.

Battery Information

The Control Unit requires (3) size C/LR14 (1.5V) alkaline batteries (not included).

CAUTION:
Follow the battery guidelines in this section. Otherwise, battery life may be shortened or the batteries may leak or rupture. To prevent battery leaks, which can burn skin and eyes:

• Always keep batteries away from children.
• Never mix old and new batteries or batteries of different brands or types.
• Always replace the entire set of batteries at one time.
• Do not mix alkaline, standard, or rechargeable batteries.
• Only batteries of the same or equivalent type as recommended are to be used.
• Install the batteries so that the polarity of each one matches the markings in the battery compartment.
• Do not short-circuit the batteries.
• Do not store batteries in areas that have extreme temperatures (such as attics, garages, or automobiles).
• Remove exhausted batteries from the battery compartment.
• Never attempt to recharge a battery unless it is specifically marked “rechargeable.”
• Rechargeable batteries are to be removed from the toy before being charged.
• Rechargeable batteries are only to be charged under adult supervision.
• Dispose of used batteries immediately.
• Please use the correct disposal method for batteries.
• Remove batteries before putting the product into storage for a prolonged period.
• Weak batteries cause erratic product operation, including distorted sound, dimming or failed lights, and slow or non-working motorized parts. Because each electrical component requires a different operating voltage, replace the batteries when any function fails to operate.
• Do not dispose of products or batteries in a fire, batteries may explode or leak.

This symbol indicates that the product is not to be disposed of in household waste as batteries contain substances that can be damaging to the environment and health. Contact local authority for recycling & collection information.

FCC Statement

FCC Statement / CAN ICES-3 (B) / NMB-3(B)
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

WARNING:
Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Parts List and Drawing

No.

|

Qty.

| Description
---|---|---
1| (2)| Base frame tube
2| (1)| Left hub with wire upright
3| (1)| Right hub with wire upright
4| (1)| Footrest wire with an electronic cord
5| (1)| Left recline mechanism
6| (1)| Right recline mechanism
7| (1)| Backrest tube
8| (1)| Control unit
9| (1)| Seat pad
10| (1)| Toy bar with plush toys
11| (1)| Bolster

Not Included

Assembly Instruction

Using And Operating Instruction

Using The Recline Function

Using the Seat Restraint

Using The Control Unit

• Power: Press the Power button to turn ON/OFF the control unit. The power LED illuminates and the unit functions are available. When the Power button is used to turn the unit, unit functions are no longer active.
• Volume: Press the Volume button to alternate between Low, Medium, High, and Mute volume settings.
• Lights: Press the Lights button to activate the lights in the toy bar. After 30 minutes, the lights will stop automatically (time out). If the lights are activated during nature sounds or music playback, the lighting timer syncs with the sound playback timer.
• Music: Press the Music button to alternate between music and mute settings. Music plays for approximately 30 minutes before time out.
• Vibration: Press the Vibration button to turn ON/OFF the vibration function. Vibration functions for approximately 30 minutes before time out.
• Nature Sounds: Press the Nature Sounds button to alternate between nature sounds and mute settings. Nature sounds play for approximately 30 minutes before time out.

Storage And Travel

To disassemble the bouncer for storage:
Use a small Phillips screwdriver to depress the release button on the inside of each connecting hub on the bouncer. Remove the footrest tube and base frame tubes from each connecting hub.

Find us on Facebook and Instagram @ingenuitybaby.

• MANUFACTURED FOR • FABRIQUÉ POUR kidls2™ kids II ©2023 KIDS2, INC. www.kids2.com/help
• KIDS2, INC. ATLANTA, GA USA 30305 • 1-800-230-8190
• IMPORTED BY • IMPORTÉ PAR
• SUMMER INFANT (USA) INC. 1275 PARK EAST DRIVE, WOONSOCKET, RI 02895 USA • 1-401-671-6551
• KIDS2 CANADA CO. PO BOX 54059, RPA LAWRENCE PLAZA, TORONTO, ON. M6A 3B7
• KIDS2 AUSTRALIA PTY LIMITED CASTLE HILL, NSW AUSTRALIA 2154 • (02) 9894-1855
• KIDS2 JAPAN K.K. c/o ARK Outsourcing KK 4-3-5-704, Ebisu, Shibuya-ku, Tokyo, Japan 150-0013 • (03) 5322-6081
• KIDS2 UK LTD. GROUND FLOOR, SUITE ATA, BREAKSPEAR PARK, BREAKSPEAR WAY, HEMEL HEMPSTEAD, HP2 4TZ • +44 01582 816 080
• KIDS2 EUROPE BV 5 KEIZERS, KEIZERSGRACHT 287, 1016 ED AMSTERDAM, NETHERLANDS • +31 20 2410934
• KIDS2 US MÉXICO S.A. DE C.V. • (55) 5292-8488

ingenuitybaby.com.

MADE IN CHINA.

References

• Ingenuity™ – Kids2, LLC
• Kids2 Contact Us – Kids2, LLC

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>